Reviews Poe Device

Cudy GS1010P 10-Port Gigabit Ethernet Unmanaged PoE Switch, with 8 x PoE+ @ 120W, Desktop/Rackmount, CCTV/VLAN Mode, 802.3af/ 802.3at, Plug and Play

  • 10 Gigabit Ethernet ports, 8 port PoE with 120W total power budget, 2 port gigabit uplink ideal for connecting NVR and Internet. Compact Design with Internal Power Supply.
  • PD Detect and Port Power Prioritization: With PD Detect Auto-sensing technology, this 8 port PoE switch delivers up to 32W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices.Port-Power-Prioritization technology guarantees continuous power supply of key nodes. Pin assignment: alternative 1/2 (+), 3/6 (-)..
  • CCTV mode support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • VLAN mode support isolate 8 PoE+ port from each other. It is easy for this 8 port PoE switch to manage and maintain which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
  • High Quality chipset inside: Use TPS POE chip high quality chip to ensure stable operation of the product.Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..
Check Stock

PoE Detector & PoE Tester (Gen2) Tool Kit - Detect Power on The Network Cable + Test Power Over Ethernet to Determine Voltage, Current and Power Consumption on Network Cable, No Battery Needed

  • ...ifies PoE type. The PoE Tester measures power consumption from DC power supplies and activates any port on an AF/AT PoE switch..
  • The detector allows you to test the line prior to installing to instantly detect power. Use to safely install cameras, wifi access points, tablets, IP phones and more without damaging your device. The tester is a powerful tool for diagnosing PoE problems and easily observing loss in the Ethernet cable..
  • Enjoy infinite usage with no need for charging or replacing batteries. Both our PoE detector and PoE Tester draw power from the network line when in use, making them completely self-sufficient..
  • Small and ergonomic, both devices can fit snugly between two fingers so that they can be held while on a ladder or in a tight space during use. Toss them into your pocket or toolbox when you're finished..
  • The PoE Detector includes a chart located on the back of the device that is quick and easy to read. The bright LED indicators allow you to easily detect IEEE 802.3af, IEEE 802.3at, 24 Volt Passive and Reverse Polarity Mode B for Cambium and Canopy. The PoE Tester Measures DC power supply voltages from 3.5 to 56 volts and current up to 280 watts at 56 volts. Displays Mode A & Mode B from 20v to 56 volts..
Check Stock

TRENDnet 65W 4-Port Gigabit PoE+ Injector, TPE-147GI, 4 x Gigabit Ports(Data in), 4 x gigabit PoE Ports(Data + PoE Out), Multi-Port PoE+ Injector up to 100m(328 ft.), Add PoE+ Power to Non-PoE Switch

  • GIGABIT PORTS 4 x gigabit ports (data in) and 4 x gigabit PoE ports (data + PoE out).
  • EASY INSTALLATION No configuration needed simply connect a PoE network devices to this 4-port PoE+ injector.
  • 4-PORT POE TRENDnet’s 65W 4-Port Gigabit PoE+ Injector supplies up to 30W of power to four PoE (IEEE 802 3af) or PoE+ (IEEE 802 3at) devices at industry PoE standards for greater device interoperability.
  • POE DISTANCE The multi-port gigabit PoE+ injector provides four PoE network connections up to 100m (328 ft ) away from the 4-port PoE injector.
  • FANLESS DISTANCE The fanless design of the gigabit PoE+ Injector eliminates operating noise and lowers energy consumption.
Check Stock

Cudy 8 Port PoE+ Switch with 2 Uplink Ports 120W, 8 10/100Mbps PoE+@120W, Extend/VLAN Mode, 802.3af, 802.3at Standard, Fanless, Watchdog, Plug and Play FS1010P

  • Reliable 10/100Mbps IEEE 802.3af/802.3at compliant PoE+ switch with 120W total PoE Power supply. Ideal for small installations of 8 PoE devices (IP Phone, Wired surveillance camera, Wireless Access Point)..
  • PD Detect and Port Power Prioritization: PD Detect Auto-sensing technology delivers up to 32W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices. Port-Power-Prioritization technology guarantees continuous power supply of key nodes. Pin assignment: alternative 1/2 (+), 3/6 (-)..
  • CCTV function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • VLAN mode support isolate 8 PoE+ port from each other. It is easy to manage and maintain which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
  • Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..
Check Stock

MikroTik Cloud Router Switch Rack-mountable Manageable Switch with Layer 3 Features (CRS317-1G-16S+RM)

  • 11 Ports: Includes 6 (1-6) 802.3af/at POE ports(10/100Mbps), 2 (7-8) BT POE++ ports (1000Mbps), 2 Gb UpLink ports(10/100/1000Mbps) and 1 SFP Uplink port. The 2 uplink ports can be connected to different networks or devices, such as routers, NVRs, etc..
  • High POE Power: Comply with IEEE 802.3af/at/bt standard, Maximum support 120W high output power,1-6 port single port MAX output power is 30W, 7-8 port single port MAX output power is 60W, Used for more kind of high-power devices such as PTZ, Wireless bridge, PoE LED etc..
  • Built-in Surge Protection: 6KV lightning protection, 8KV electro-static, surge protection, short-circuit protection, over-temperature protection, over-current protection..
  • PoE Watchdog AI Function: Automatic detection, automatic restart, detects the power receiving port automatically, detected the dead device and restarts the device after power failure..
  • IP65 Waterproof: Industrial housing design, integrated top cover, PC/ABS high polymer alloy material, extraordinary toughness, waterproof indoor and outdoor full-time, make sure the switch can be used in the bad weather..
Check Stock

Cudy 24 Gigabit Ethernet Unmanaged PoE+ Switch, 300W, 24 * 100/1000Mbps PoE+ Ports, 2 Gigabit SFP, CCTV/VLAN Mode, 19-inch Rackmount, 802.3af/at, GS1028PS2

  • ..., support up to 32w for one port. 2 Gigabit SFP Port provide flexibility in network access management.
  • One Key Switch for CCTV and VLAN: CCTV function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras. VLAN mode isolate the PoE+ ports from each other, which can improve the network environment and reduces network maintenance costs..
  • PD Detect and PD Alive: PoE ports can automatically detect and supply power to IEEE802.3af/at compliant Powered Devices (PD). PD Alive check function (watchdog) supports monitor connected PD (Powered Device) status. If a PD stops working and responding, this PoE switch will reactivate the PD by resuming POE port power. It also support port power supply prioritization, guarantee the continuous power supply of key nodes..
  • Desktop and Rackmount Support: 19-inch metal shape supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box..
  • High Quality chipset inside: Use High Quality POE chipset to ensure stable operation of the product.Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed. ....
Check Stock

BV-Tech 10 Port PoE/PoE+ Switch (8 PoE+ Ports | 2 Gigabit Ethernet Uplink) – 96W – 802.3af/at| POE-SW811

  • 8 PoE+ Ports at 10/100Mbps each, 2 Uplink ports at 10/100/1000Mbps each.
  • Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-8 up to 30W per port, which is better than normal PoE port that can only provide 15.4W per port..
  • PD detection will automatically detect and provide required power for your PoE devices **Note: Do not support passive PoE device**.
  • 100% Satisfaction Guarantee – 30-day Money-Back Guarantee with 1 Year Warranty and Lifetime Tech Support.
Check Stock

Mikrotik RB3011UIAS-RM RouterBOARD 10xGigabit Ethernet, USB 3.0, LCD, RB3011

  • The RB3011 is a new multi port device, our first to be running an ARM architecture CPU for higher performance than ever before.
  • The RB3011 has ten Gigabit ports divided in two switch groups, an SFP cage and for the first time a SuperSpeed full size USB 3.0 port, for adding storage or an external 3G/4G modem.
  • RB3011UiAS-RM Unit comes with 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and PoE output functionality on the last Ethernet port.
  • Dimensions: 443 x 92 x 44 mm, Size of RAM: 1 GB, Storage size: 128 MB, PoE in: Passive PoE, PoE-out ports: Ether10, PoE out: Passive PoE.
  • 10/100/1000 Ethernet ports: 10, SFP ports: 1, Number of USB ports: 1, USB slot type: USB 3.0 type A, PCB temperature and Voltage monitor.
Check Stock

Netis Combo-Port Gigabit PoE Switch Max Output 140WTP & SFP Shared Interfaces (PE6310)

  • 8 10/100 Mbps Ethernet ports, 210/100/1000 Mbps Ethernet ports supporting both copper and SFP connections.
  • Supports PoE power up to 30W for each PoE port, 140W for all PoE ports.
  • Supports PoE IEEE 802. 3at/aft compliant Powered Device (PD).
  • Complies with IEEE 802. 3at/aft standards.
  • Intelligent Power Management, Support configuration port power priority.
Check Stock