Reviews Pneumatic Valve Actuator

Bestauto Pneumatic Car Jack 6600lbs Heavy Duty Air Jack Lifting Height Up to 16 Inch

  • Labor-Saving Jack: The pneumatic jack capacity: 6600 lbs/3T. Minimum height: 5.5"/ 140 mm. Maximum height: 15.75"/400 mm. It only takes 3-5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lifted..
  • Heavy Duty Construction: Our pneumatic jack is a high-strength steel that makes the whole body sturdy and durable. Highly sealed airbags will not leak or be scratched. In addition, our wheels are better suitable for all-terrain, helping you maintain your car anytime, anywhere..
  • Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air.
  • when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The relief valve in the middle ensure the injected gas is not excessive to ensure the security of the use process..
  • Portable Handle: This airbag jack has a long handle, which makes the jack easy to move and use. And this handle can be disassembled from the middle, saving space and making it suitable for you to keep in your trunk..
  • Wide Application: The quick jack car lift is suitable for the situation where a single wheel needs to be lifted in soft terrain or muddy roads for family-used cars, min....
Check Stock

2 Pcs Intake & Exhaust Camshaft Position Actuator Solenoids for GM Chevy Malibu HHR Buick Pontiac 2.0L 2.2L 2.4L 12655420 12655421

  • ● These Camshaft Position Actuators(also called VVT Solenoids) Fits for 2006 - 2010 Chevy Cobalt, Chevy Malibu 2008 - 2014, 2006 - 2011 Chevy HHR,....
  • ● P0014 P0011 could also be caused by that the valve timing need be adjusted, adjust timing not only replace Solenoids.. Intake actuator for a P0010....
  • ● Intake Solenoid Part Number: 12655420, 12628347, 12646783, 12578517, 12679099, 917215, 917-215, 2T1014.
  • Exhaust Solenoid Part Number: 12655421,....
  • ● Package Content: 1 x Intake Solenoid (light gray connector), 1 x Exhaust Solenoid 12655421 (Black).
  • The intake actuator comes with a new bolt and....
Check Stock

Kazeffi Synchron Motor 24V 4RPM Replacement for Honeywell Motor 802360JA，Used in V8043/8044 Zone Valve Control

  • 【Higher Performance】:802360JA Zone Valve motor Adapt to Honeywell zone valve motor V8043/V8044 . This Zone Valve Motor 24V, 4rpm at 50/60HZ. Cable....
  • 【Save time and money】:This Replacement motor for v8043 zone valves motor Easy to install. No need to replace brand new actuators or other HVAC....
  • 【High Quality】:Quality tested for over 100K cycles for flawless operation,Metal gears can be perfectly compatible with Honeywell V8043 or V8044....
  • 【More Applicable Scenarios】:802360JA can be replaced: HVAC damper control motor, Actuator Zone Valve motor etc. After many professional debugging,....
  • 【After-sale service】:100% after-sale guarantee, if you have any dissatisfaction with the product, you can ask for a replacement or a full refund.....
Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock

Water Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)

  • ...oncave) is the "outward" side of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use.
  • General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience.
  • Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life.
  • Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can to pneumatic tools.
  • Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools.
  • Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools.
  • It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering....
Check Stock

Dual-Head Pneumatic Jewelry Engraver Machine 110V 60Hz Pneumatic Hand Engraving Machines 400-8000 RPM Pneumatic Graver Handpiece Micro Engraer for Jewelry Crafts and Wrought Iron

  • 【Technical Parameter】Product type: Dual-head jewelry pneumatic engraving machine. Model: HH-G01, power supply: 110V 60HZ, adjustable speed: 400-8000 RPM, flexible pressure range: 0-4 KG..
  • 【Precise & Adjustable Gauge】The pneumatic engraver features 400-8000 strokes per minute, a throttle bias adjustment valve for tailoring throttle response.
  • 【Ergonomic Design】Advanced ergonomic designs are adopted as the front air pressure adjustment, quick connection air connector, and advanced valve pulse device, without noise or vibration..
  • 【Easy-to-operate Panel】Adopting user-friendly keyboard design & reasonable layout, easy to operate, intuitive & clear. The foot pedal is convenient for precise control..
  • 【Various Application】Pneumatic hand engraving machines are suitable for jewelry, crafts, wrought iron & other industries and can be regarded as a good helper for engravers..
Check Stock

Mophorn Triple Bag Air Jack 6600lbs Pneumatic Jack 3 Ton Car Jack Lifting Up to 16 Inch Portable Repair(Blue)

  • Labor-Saving Jack: The pneumatic jack capacity: 6600 lbs/3T. Minimum height: 5.5"/ 140 mm. Maximum height: 15.75"/400 mm. It only takes 3-5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lifted..
  • Heavy Duty Construction: Our pneumatic jack is a high-strength steel that makes the whole body sturdy and durable. Highly sealed airbags will not leak or be scratched. In addition, our wheels are better suitable for all-terrain, helping you maintain your car anytime, anywhere..
  • Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air.
  • when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The relief valve in the middle ensure the injected gas is not excessive to ensure the security of the use process..
  • Portable Handle: This airbag jack has a long handle, which makes the jack easy to move and use. And this handle can be disassembled from the middle, saving space and making it suitable for you to keep in your trunk..
  • Wide Application: The quick jack car lift is suitable for the situation where a single wheel needs to be lifted in soft terrain or muddy roads for family-used cars, min....
Check Stock

VEVOR Pneumatic Jewelry Engraver Machine 110V 60Hz Pneumatic Hand Engraving Machines 400-8000 RPM Pneumatic Graver Handpiece Double-Head Micro Engraver for Jewelry Crafts and Wrought Iron

  • Technical Parameter: Product type: Dual-head jewelry pneumatic engraving machine. Model: HH-G01, power supply: 110V 60HZ, adjustable speed: 400-8000 RPM, flexible pressure range: 0-4 KG..
  • Precise & Adjustable Gauge: The pneumatic engraver features 400-8000 strokes per minute, a throttle bias adjustment valve for tailoring throttle response.
  • Ergonomic Design: Advanced ergonomic designs are adopted as the front air pressure adjustment, quick connection air connector, and advanced valve pulse device, without noise or vibration..
  • Easy-to-operate Panel: Adopting user-friendly keyboard design & reasonable layout, easy to operate, intuitive & clear. The foot pedal is convenient for precise control..
  • Various Application: Pneumatic hand engraving machines are suitable for jewelry, crafts, wrought iron & other industries and can be regarded as a good helper for engravers..
Check Stock

1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve

  • .WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position..
  • .2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum)..
  • .Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
  • .This solenoid valve has one G1/4" inch DN8 inlet and one G1/4" inch DN8 outlet port. Valve stays close when the coil is de-energized- and it opens when energized..
  • .1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas..
Check Stock