Reviews Pneumatic Seals

AmazonCommercial Heavy Duty Double Diaphragm Transfer Pump 1/2\ Nitrile / NBR / Buna-N - 13GPM / 50LPM Aluminum Air Operated Pneumatic for Diesel, Grease, Kerosene & Oil

  • Heavy-duty double diaphragm fuel pump for transferring non-flammable liquids like diesel, kerosene, and oil (note: DO NOT USE for gasoline, bio-diesel, windscreen, or similar chemicals).
  • Self-priming pneumatic pump provides a flow rate of 13GPM (50LPM).
  • ideal for fuel stations, construction sites, textile factories, mining stations, and environmental/water facilities.
  • Maximum pressure of 116PSI/8BAR with 1/2-inch inlet/outlets and an air inlet of 1/4-inch NPT.
  • maximum suction height of 10 feet and a maximum head of 164 feet.
  • can accommodate suspended solids up to 1/8-inch wide.
  • Compact, lightweight design with durable aluminum body.
  • membrane, o-rings, seals, and elastomers are made of durable Nitrile/NBR/Buna-N material.
  • backed by an AmazonCommercial 1-year limited warranty.
Check Stock

KOOTANS 1200Pcs Nitrile Rubber O Ring Kit 24 Sizes O Rings Assortment Kit Set Sealing Washer NBR Metric o-Ring Assortment for Plumbing, Gas, Automotive and Faucet Repair, Resist Oil and Heat O-Rings

  • ...t plastic box with labels, saves you effort in tidying up and choosing sizes. And 1200 pieces are enough that will keep you going for months or even years. You don't have to go to a hardware store..
  • 【WIDE APPLICATION】Nitrile rubber metric o rings prevent leaks in fuel or water plumbing, machinery, hydraulic, and pneumatic connection.
  • provide secure seals for any oil, air, gas, and water seal application(faucet, sinks, filters). Used to electronic equipment, pipes, tap faucets, pumps, solenoids, gauges, sensors, trucks, cars, motorcycles, boats, engines, spray guns, pressure washers, and more..
Check Stock

Acuteye 33FT/10Meters Pneumatic Air Tubing, 10mm OD x 6.5mm ID PU Polyurethane Air Compressor Tube Hose Pipe For Air Compressor Fitting or Fluid Transfer (Black)

  • Pneumatic Tubing Pipe Size: 3/8" (Outer diameter) X 1/4" (Inner diameter). Product Total Length:33 Feet (10meters).
  • Pneumatic Tubing Material: PU ( Poly Urethane ),has high elasticity to restore memory effect. Flexible.
  • Burst Pressure: 2.5Mpa(363Psi).Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2.
  • Application: air, water, chemicals, lubricants, instrument lines, irrigation control systems, textile mills, food plants, vehicles and ships fuel delivery pipe, vacuum systems, air conditioning systems, cars, And hydraulic brake system, oscillation insulator and other industries. Pneumatic pneumatic tools.
  • Application Range: Pneumatic pneumatic tools.
Check Stock

Simlug Mini Air Pneumatic Cylinder, Cdj2B10-30B 10Mm Diameter 30Mm Stroke DoubleActing Stainless Steel Pneumatic Air Cylinder

  • The pneumatic actuator, The pneumatic cylinder is a mechanical devices which use the power of compressed gas to produce a force in a reciprocating linear motion..
  • The pneumatic air cylinder, Made of high quality stainless steel, the pneumatic cylinder has long service life..
  • This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
  • It has 10mm cylinder diameter and 30mm stroke, the pressure is 0.15Mpa~1Mpa..
  • Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage..
Check Stock

Metabo HPT 18V MultiVolt™ Cordless Angled Finish Nailer Kit | Accepts Nails 1-1/4-Inch up to 2-1/2-Inch | 15 Gauge | Lifetime Tool Warranty | NT1865DMAS

  • CORDLESS NAILER: 15 Gauge Cordless Nailer.
  • INCLUDES: NT1865DMAS, (1) Compact 3.0Ah Lithium Ion Battery, Charger, Contractor Bag, Safety Glasses.
  • FASTENERS: 15 gauge angled finish nails from 1-1/4-in - 2-1/2-in.
  • POWER: 1,100 Nails per charge using Metabo HPT's compact 3.0 Ah Li-ion battery.
  • APPLICATIONS: Ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite without the need for a tank or hose.
  • DEPTH ADJUSTMENT: Get a professional finish with varying materials with the tool-less depth of drive adjustment.
  • PNEUMATIC-LIKE FEEL: The unique air spring drive system delivers similar performance as a pneumatic nailer.
  • BRUSHLESS MOTOR TECHNOLOGY: Experience longer run time per charge, less maintenance and increased durability.
Check Stock

Fuelworks Double Diaphragm Transfer Pump 1/2\ inch Nitrile/NBR/Buna-N 12gpm / 45lpm Heavy Duty Aluminium Air Operated Pneumatic for Diesel, Grease, Kerosene and Oil

  • PUMP SPECS - This Pneumatic Diaphragm Pump has a Flow Rate of 12GPM/45LPM with Self-Priming capabilities.
  • Max Pressure: 116PSI/8BAR with 1/2" inch Inlet/Outlets, an Air Inlet of 1/4" inch NPT, a Max diameter Solid of 1/8" inch and complete with a pair of PTFE Ball Valves.
  • EFFICIENT DESIGN and CAPABILITIES - Our Diaphragm Pumps are compact, lightweight and built of an Aluminium body for rigorous applications and the Membrane/O-Rings/Seals/Elastomers are of Nitrile/NBR/Buna-N material.
  • With a Max Suction Height of: 10ft (3m) and Max Head of: 164feet (50m) for professional applications.
  • SAFETY and PROPER USE - The Fuelworks Diaphragm Transfer Pump is to be mounted upright during operation for user safety.
  • This pump is designed specifically for Fuel Transfer of [Non-Flammable Liquids like: Diesel, Grease, Kerosene and Oil] (DO NOT USE FOR GASOLINE, Bio-Diesel, Windscreen and Similar Chemicals).
Check Stock

SRC40 Swing Clamp Cylinder 90 Degrees Large Rotary Actuator Pneumatic Clamping Cylinder (SRC40x90L)

  • Excellent Material: This pneumatic swing clamping cylinder is made of pure aluminum block through CNC machining center, non-die-casting aluminum, high density and high strength, support long time work..
  • Hard Oxidation Treatment: The mirror inner wall surface of this pneumatic swing clamping cylinder is hard anodized to prolong the service life of the cylinder..
  • Protective Layer: The hard protective layer of this pneumatic swing clamping cylinder is not easy to be worn, not easy to be corroded, and can be used in harsh working environments..
  • Features: This pneumatic swing clamping cylinder has high consistency of water inlet and outlet, quick joint installation, and is not easy to leak.
  • left-turn-L and right-turn-R are optional..
  • Use Pressure Range: The pressure range of this pneumatic swing clamping cylinder is 1-7kgf/cm(Kpa)..
Check Stock

Pneumatic clamp, G18 pneumatic sealing clamp Easy to use Wide application for machining

  • Wide Range of Uses: Widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
  • Iron Material: Pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • Improve Production Efficiency: Cylinder Pneumatic hold down clamp can shorten test time and improve production efficiency..
  • Realize Automatic Control: Cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
  • Ensure Machining Accuracy: Pneumatic clamp can reduce the labor of workers, help ensure workpiece machining accuracy..
Check Stock

Pneumatic Clamps Pneumatic Clamp 300mm GH-12130 Professional Cylinder Pneumatic Hold Down Clamp

  • ...ference mechanics and dynamics design and the overall structure is ergonomic that the thin, compact fixture is suitable for narrow working spaces. With a total length of 300mm and a maximum clamping force of 230 kg,the Clamp helps to ensure the machining accuracy of the workpiece..
  • 【operate easily】 This Cylinder Pneumatic Clamp provides a smoother operation during repeated clamping operations than manual clamps. The intake port size is M10.The maximum working pressure is 9Kgf / cm2 (0.9mpa) 100PSI, and the movable distance of the clamping rod is 60mm / 2.3in, The Pneumatic Clamping Tool operate easily, and it is easy to realize automatic control..
  • 【Improve efficiency】This Pneumatic Hold Down Clamp is used for positioning, clamping workpiece station. It is powered by compressed air and has the characteristics of labor saving, energy saving and environmental protection. It can shorten test time,and improve production efficiency which reduce labor intensity of workers.Pneumatic clamp is easy to operate and easy to implement automatic control..
  • 【Application】 This Pneumatic Lever Clamp is used for mass production, and the workpiece station that needs to be positioned and clamped can be used. It is commonly used in stations such as welding, gages,....
Check Stock