Reviews Pneumatic Fender

ECOTRIC 21\ Wrap Front Fender Compatible With Harley Touring Electra Road Street Glide Baggers Road King FLT FLHT FLHR FLHX FLTR

  • 21" Wrap front fender is compatible With Harley Touring models and custom baggers.
  • This fender has a low profile, oversized wrapped around design for 21" wheels. Approx. length: 28".
  • A width of 5 1/2" edge to edge at the fender mounting area. This fender is fit for the flat tire which the Flat Rate is below 65 R /65%. ( Pls ensure this part fits for your motorcycle before ordering ).
  • 100% Brand New. Constructed with top quality heavy duty metal for the ultimate in strength and durability. This fender won't flex and split..
  • Packing List: 1x Front Fender.Instruction and mounting hardware are not included.Professional assembly is highly recommended..
Check Stock

SKS P65 Black Chromoplastic Longboard, Bicycle Fenderset (Tires Sized 26 x 2.1-2.35 )

  • Fender profile will work with tires up to 2.35" wide.
  • 65mm fender profile must fit through seat stays and fork legs.
  • Fender eyelets or frame clamps (sold separately) are necessary for mounting.
  • 3.4mm V-Stays and Stainless Steel hardware.
  • Installation difficulty rating: 8 out of 10. Install time is roughly 1.5 hours. Tools are required..
Check Stock

SKS-Germany P50 Chromoplastic Longboard Bicycle Fenderset, Black,700 x 38-45 (29er),11193

  • Fender profile will work with tires up to 45mm wide.
  • 50mm fender profile must fit through seat stays and fork legs.
  • Fender eyelets or frame clamps (sold separately) are necessary for mounting.
  • 3.4mm V-stays and stainless steel hardware.
  • Installation difficulty rating: 8 out of 10. Install time is roughly 1.5 hours. Tools are required..
Check Stock

TuTuYa Fender Flares, 4.9Ft/1.5m Universal Car Wheel Fender Extension Moulding Flares Auto Tyre Eyebrow Trim Strip Stick Out Edge,Pack of 4 Pcs

  • IMPORTANT:because the car wheel fender is made of high-strength soft rubber so that it is easy to deform.in order to ensure it be more stable after the install, if possible,you could heat it before install,and adjust to best fit the shape of your car tires eyebrow then stick wheel fender on the car.How To Install &Tips please kindly check it all !!!.
  • TIPS TO PREVENT FENDER FLARES FALL OFF: 1.Please install the car wheel fender in good weather day or warm indoor.it would be better if use a heat gun or hair dryer to heating the item.
  • they go on easy if you heat up each section of the rubber.(HIGHLY RECOMMEND). 2.Follow installation instruction(HOW TO INSTALL). 3.Leave the car alone for 24 hours after install the wheel fender flare..
  • HOW TO INSTALL: 1.Clean the pre-installed position,make sure the position is clean and dry before you install. 2. Measure the length of tail in need.3.Cut off excess length,heat it if possible. 4. Use the adhesion promoter(wipe paper) to wipe the pre-installed position,then waiting about 10 seconds. 5. Tear the cover of the glue of one end of car wheel rubber strip then stick on car. 6. Tear more cover of glue slowly and stick it on car slowly with strength..
  • FUNCTION:Exterior wheel tyre fender protective and decorative accesso....
Check Stock

Osprey Dirt Scooter | for Adults and Beginners Bicycle with Chunky Road Tyre Off Road All Terrain Pneumatic Trail Tires and Aluminium Deck, Multiple Colours

  • ...scooter with strong but light, full chromoly bars and aluminium deck. Ideal for all terrains including dirt, grass, rough ground, and trails. The perfect scooter for anyone who wants to join this adventurous sport.
  • TYRES DESIGNED FOR OFF ROAD TERRAIN - 200 x 50 mm off-road pneumatic tyres with 3-piece aluminium metal hubs are durable and maintain a strong grip, ideal for tackling tough terrain.
  • TACKLE DIRT LIKE A PRO – the max grip bar grips with locks and triple stack threaded headset are ideal for staying in full control whilst manoeuvring around the track. The deck frame is light, yet strong enough to tackle and rocks or gravels.
  • HIGH QUALITY SPEC – benefitting from a stainless-steel rear brake and fender for extra stopping power and tubular BMX style forks made specifically for tackling dirt, this scooter is ideal for the unpredictable condition of an off-road ride.
  • DURABLE AND BUILT TO LAST - built and tested for durability, performance, and style on any terrain.
Check Stock

NICECNC Motorcycle Front Fender Bag, Universal Dirt Bike Fender Bag with Tool Roll Bag, Dirt Bike Tool Bag Motocross Enduro Fender Pouch Accessories Storage Bag Dual Sport Riding Easy to Install Red

  • ★【More Capacity】: NICECNC Motorcycle Fender Bag designed with an 2.6'' expansion layer, after enlarge is up to 5L. And equipped with tool pockets and straps, multi-pocket design to organize the fender storage bag in an orderly manner, enough to hold the commonly used tools..
  • ★【Premium Material】: The Enduro fender bag is fully Made of upgraded PVC fabric, which has higher density, scratch resistance, and higher water-resistance than 1680D Oxford cloth..
  • ★【Double Sure】: This Dirt Bike Bag comes with waterproof PU zipper and dust cover, effectively withstand light rain and prevent mud stuck on zipper, which provide longer service life..
  • ★【Anti-slip】：Our Motorcycle Tool Bag Special anti-slip pattern straps increase the friction between the straps and fork,With the bottom non-slip fabric, no worry about the smooth surface of the fender, which makes less slide at high speeds..
  • ★【2 Min to Install】：No need for additional modification or drilling, only 2 minutes are required to install the on Front Fender by 4 buckles and 1 strap, the Front Fender....
Check Stock

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

  • Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
  • Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
  • Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
  • Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
  • Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.
Check Stock

NICEDACK Bike Fender MTB Mud Guard, Front and Rear Bicycle Mudguard Set, Downhill Mountain Bicycle Fenders Fits 20\ 26\ 27.5\ 29 inch and Fat Bike (Red)

  • [NEW Generation Bike Fender] This is the latest and best version of the NICEDACK bicycle fender / mudguard. It is a creative and perfect combination of bike mudguard and bike reflector. The reflector at the end of the fender adding visibility at dark night, ensuing cycling safety..
  • [Functional Mudguard] It's big enough to prevent the mud splashing when compared with other bicycle fenders on the market. This is a thickening bicycle rain fender and mudguard for quick attachment to your seat when rain shower surprises you on your bike ride. Keeps your butt dry on wet roads..
  • [Unique Carbon Fiber Grain] It's pressed with carbon fiber pattern, not a carbon fiber fender, But 1.2mm thickness make it super tough but flexible enough to get it to fit for most mudguard mountain bike. Non-toxic PP engineer plastic material can be suffer in high temperature,long -lasting exposure and can be folded many times..
  • [Stylish Appearance] Streamline shape and lightweight mtb mudguard makes your bike cool. This NEW NICEDACK bike fender vastly improved attachment system, more coverage by a larger mud guard area, and more stability..
  • [Install and Remove Easily] Free to adjust the angle between mudguard and bike tire, no any repair tools required. It's a easy to install and remo....
Check Stock

Affordura Boat Fender Covers Fleece 2 Pack Marine Fender Covers for Boats Bumper Covers 8.5X 16 in

  • Warranty and package- one year warranty offered by Affordura boat fender covers. The package contains 2x 8.5x 16 in bumper covers for boats, suitable for 6.5 inch boat fenders..
  • Soft Fleece- Made of exceptionally heavy, durable and soft boat fender covers fleece to keep your boat from getting all marked up from the fender. No scuffing to the gel coat of your boat..
  • Easily install- Fit perfectly and easy tie on for installation on your fender, with a drawstring on one end and elastic string on the other end which are pulled tight and tied off..
  • Fadeless- still keep the colors and hold up well in the sun, add the classic look of your fenders..
  • Thicken fabric- Protects the fiberglas boat finish, after using the marine fender covers, the fender rubber doesn't leave marks on the side of the boats any more..
Check Stock