Reviews Plc Router

STEPMAX 3.6V 8000mah YASKAWA HW0470360-A Battery Pack for Motoman Robot with Plug

【Capacity: 8000mah、Voltage: 3.6V、Size：14.5 * 53 mm】.
【Feature】①High voltage and stable working voltage②Large capacity and good safety③The use of a wide range of temperature (-40℃~+85℃)④Long service life: 10 years or more.
【Note】This battery is not rechargeable..
【Main application】Our battery mainly applies to Yaskawa industrial robots, CNC machine tools, PLC industrial control equipment systems, machine tool equipment, PLC backup memory power supplies, various measuring instruments, etc..

★ Battery Model Number : A6BAT Battery- Size 2/3A 3.6V Lithium Battery.
★ 3.6v lithium battery with wire lead and connector ,2 wire 2-pin connector.
★ Battery- Size 2/3A 3.6V Lithium Battery ； Dimensions battery: ø17 mm x 33.6 mm.
★ Other applications: Alarm system, PLC memory backup power supply, CNC system, servo motors, machine tools, instruments, special electronic equipment, etc..
★ Package Included: 5 x A6BAT ER17330V PLC Battery.

No Programming Required ! Put batteries in and work (Battery NOT include).
If not work directly, you may need to clear the TV's memory first. Please turn off the TV, unplug the power cord, wait for 30 seconds, then replug in the power cord, turn on the TV, and try the remote again..
Compatible with Proscan PLED2694A PLC3708A PLCD3283A PLCD3717A PLCD4692A PLDED3273A TV PLED2694A PLC3708A PLCD3283A PLCD3717A PLCD4692A PLDED3273A PLED2243A TV.

✅【Function】Industrial 2.4GHz & 5GHz dual band WiFi Bridge/Repeater/Router/WiFi to ethernet RJ45 port，achieve WiFi to Wired or Wired to WiFi function.
✅【Parameters】WiFi rate: 300Mbps(2.4GHz) and 900Mbps(5GHz)，Support 802.11ac/a/b/g/n WiFi protocol，Point-to-point transmission( by 802.11A protocol) distance: maximum can be up to 150-200 meters when without obstacle and small data(5G), the transmission distance is 100-150 meters when used for video transmission(5G).
✅【Power Supply】Powered by wide voltage DC5V-15V(Typical 5V/2A, ripple less than 100mV)，USB or DC female port optional powered Mode, one 30cm power cable with 1 male DC port and 1 male USB port.
✅【Scope of Application】 Good Partner for security system, electronic scales, DVR, IP camera, medical devices, IoT devices, video transmission, industrial PLC, AGV, PS3, network Printer, robot, doll machine and more WiFi Network application.
✅【Fever Problem】The aluminum alloy casing has good heat dissipation characteristics, which can quickly dissipate the heat generated by the device when it is working. The heat generated by the chip is dissipated in the metal casing，there is no need to worry too much about the temperature of the casing, after a lot of testing, the d....

The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
CAN industrial automation control system.
The serial communication device is connected to CAN-bus.

Protection function: The relay can effectively avoid system instability caused by mutual interference, effectively protect the output node of the PLC, ensure the normal transmission of the signal, and thereby protect the relay..
Uses: The relay module can be used to protect the PLC internal relays, which can directly replace traditional relays, reducing maintenance time and cost.
Stable performance: The signal amplifier is made of high-quality electronic components with stable and reliable performance..
Easy to install: It is recommended to design to make drilling and module installation more convenient..
After-sales service: We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..

FUNCTION: The frequency of the pulse signal 0HZ to 10KHZ converts into an analog voltage signal of 0-10V. Can be used to interface switching between the PLC and the frequency converter, or interface matching such as the matching of motion control card and inverter control..
FEATURES: Input pulse level is 5V 12V 24V, which can be directly entered without serial resistor. The input signal frequency must maintain more than 0.5 seconds..
ANTI-INTERFERENCE: Conversion module's signal inputs with optical coupling isolation, which can ensure that the capability of anti-interfence..
APPLICATION: Frequency to Voltage Converter Module Can be used for industrial control panel PLC or other signal interface switching.
MAJOR SPECIFICATIONS: Output current: 5MA,Voltage: 0-10V, Input pulse level: 5V 12V 24V, Frequency: 0 to 10KHZ..

The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals.Allowable error:5%..
It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM..
The modules are small in size and easy to use in different places.Easy to operate, fine tuned by potentiometer..
MCU embedded technology.Work Voltage:DC 12V-30V(Power requirements:> 100MA).
Select the PWM signal input level range through short-circuit.The peak of 4.5V to 10V level. The short cap install in ‘5V’. This level is used for normal controller or 5V MCU.
The peak of 12V to 24V level, so inserted in 24V. The short cap install in ‘24V’. This level is used for normal PLC controller..