10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1/4\ Tube OD x 1/8\ NPT Thread
- Made of quality plastic and stainless steel for durable use.
- Easy to install and removed, 360-degree rotate freely, release rings adopt ellipse design, offering good seal property.
- Operating Pressure: 0- 150 PSI/ 0-9.9 kgf/cm2 (0-990kPa).
- Working Temperature: 0-60°C | 32～140°F.
Check Stock10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1/4 Tube OD x 1/4 NPT Thread
- Made of quality plastic and stainless steel for durable use.
- Easy to install and removed, 360-degree rotate freely, release rings adopt ellipse design, offering good seal property.
- Operating Pressure: 0- 150 PSI/ 0-9.9 kgf/cm2 (0-990kPa).
- Working Temperature: 0-60°C | 32～140°F.
Check Stock
Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings
- ...tion tube hand punch (1pc professional hole punch and 1pc 2-in-1 punch tool).
- and 30pcs drip irrigation fittings: 20pcs straight barbed plugs and 10pcs figure 8 end closure plugs, 32pcs in total. This is a practical tool kit to meet your daily gardening and irrigation needs..
- ❀【Long-Lasting】: Made of durable plastic, these punch tools and irrigation fittings are sturdy and safe, non-toxic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
- ❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
- ❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the figure 8 end cap plugs used for clamp the end of 1/2" irrigation tubing for stopping water flow. These ir....
Check StockTAILONZ PNEUMATIC Elbow and Straight Combination 1/4 Inch Tube OD x 1/4 Inch NPT Thread Push to Connect Fittings PC-1/4-N2+PL-1/4-N2(Pack of 12)
- 【Product Name】Elbow and Straight Push-in Connect Fittings.
- 【Size】1/4" Tube OD x 1/4" NPT Thread.
- 【Maximum Pressure】145Psi【Working Temperature】32～140°F.
Check Stock
Zantlea Pipe and Tube Cutter, Ratcheting Hose Cutter One-hand Fast Pipe Cutting Tool with Ratchet Drive for Cutting Less Than 1-1/4\ O.D. PEX, PVC, and PPR Pipe
- 【High Quality and Safety】The durable tube cutter are made of manganese steel that is high hardness, good toughness, strength and durable. Our blade SK5-42mm is imported from Japan. PVC Pipe Cutters is ideal for use on a variety of plastic pipe and tube. The Pipe Cutter handle design Lightweight, and the blade is thick and sharp. Make work easier. And It process heat-treated to make the blade more sharp, durable and not easy to break. At the same, it is not easy rusting..
- 【Ergonomics Design】 The professional tube cutter adopts ratchet drive technology to greatly save your strength. Powerful and do not require much strength to cut pipe. The powerful bite force makes the work easier. The fish handle is for added comfort, which guarantees long-lasting working. The tube cutter can improve work efficiency by fast cutting. User can cut pipe within 5 to 20 seconds, comfortable design for easy cutting and less hand fatigue..
- 【EASY TO OPERATE】Tubing cutter built with comfortable, ergonomic, textured handles that provide a reliable grip. Spring-loaded handles allow for faster positioning of easy, single stroke cuts. In the bottom of the tube cutter, there has a stainless buckle. When you don’t use it, you can buckle the safe lock. The tube cutter wi....
Check Stock
Bigbong 10cc Liquid Dispenser Paints Solder Paste Silicone Sealant Adhesive Glue Syringe Dispensing Needle Syringe Barrel Adapter
- HIGH QUALITY EPOXY MIXING NOZZLE: Made from premium PE thermoplastic resin material, non-toxic, odorless and insoluble in common solvents, low water absorption and good electrical insulation.
- SMOOTHLY MIXING: Epoxy mixing tubes features 17 Cascades and 4 inch length. The liquid from AB plastic tube into the mixing tube in tube flow do cutting restructuring movement, internal spiral design simplify the mixing process, can make glue mixing more evenly.
- EXPOXY TUBES STATIC MIXER SIZE: Inner Diameter: 0.2 inch (5.4mm). Outer Diameter: 0.3 inch (7.6mm). Length: 4.1inch (103mm). Element Number: 17..
- DISPOSABLE STATIC MIXER: The motionless mix tube is designed for adhesive mixing, meter mix machines, concrete repair, carbon fiber applications, gasketing, and potting. We recommend a mixing ratio of 1:1 or 2:1 to guarantee a complete mix for epoxies, composites, polyurethanes, silicones, and methyl methacrylates.
- WIDE APPLICATION: This lightweight and portable applicator is suitable for the mixing of two liquid materials with large differences in viscosity, and it fits for use with 50mL Cartridges/Duo-Pak Epoxy Cartridges.
Check Stock
MANSHU 50pcs Adjustable Irrigation Drippers, Drip Emitters Perfect for 4/7mm Tube PE Pipe, Adjustable 360 Degree Water Flow Drip Irrigation System for Flower beds, Vegetable Gardens, Herbs Gardens.
- Plastic Irrigation Dripper: these drip emitters are made of quality plastic. Color: Black. The bottom is sharp and easy to insert into the soil. Package Contents: 50 x Drip Irrigation drippers Stakes..
- water outlet hole diameter: 0.05 inch / 14mm. Irrigation angle: 360 degree Suitable for 4/7mm (Inner/Outer diameter) tube. Each dripper has 8 outlet holes at the top..
- Adjustable Water Flow: Water flow can be adjustable by rotating the water outlet hole cap. Adjust the amount of water according to actual needs, let your plant grow healthily, save water resources and save money..
- How to Connect: 1. Connect to the PE pipe directly. 2. Connect to the 4/7 distribution tubing. Tips: Soften the tube hole with hot water before connecting the tube and dripper..
- Wide Application: Suitable for pots, tubs, ground cover, landscaped gardens, flower beds, vegetable gardens, herbs gardens, greenhouse, orchard, lawn, self plant and so on..
Check StockOxygen Tubing Swivel Connector - 10 PCS Cannula Connectors, Avoid Tube Tangles (Male to Male) (10 Count (Pack of 1))
- ★Prevent Tubing Tangles: The oxygen tubing connectors can solve the problem of oxygen tube knotting, and won't trip you up..
- ★Leak-Free: These cannula connectors can be tightly connected to the oxygen tube without loosening and causing the oxygen patient to lose oxygen..
- ★360 Degree Swiveling: The package includes 10 packs of tubing swivel connectors, increase patient comfort and mobility..
- ★Easy to Use: You can easily connect the two tubes to the length you need using the oxygen hose connectors..
- ★Durable Material: The oxygen connector is made of safe PE plastic material and can be reused..
Check StockMale Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10
- Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
- Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
- High Quality Material: The connector made of high quality plastic and stainless steel.
- corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
- Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
- Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
Check Stock 
