Reviews Plastic Hose Fittings

25 psi Water Pressure Reducer Regulator for Drip Irrigation System, 3/4 inch Hose Thread, 150 psi Max Inlet Pressure, Lead-free Brass

  • Maintains water pressure between 20-30 psi (25 psi nominal). 0-6.5 GPM (gallons per minute) flowrate. Maximum Inlet Pressure: 150 psi. Note: As with most drip system pressure regulators, the outlet pressure might slowly build up above 30 psi if the outlet is completely shut..
  • Inlet Size: ¾" FHT (female hose thread). Outlet Size: ¾" MHT (male hose thread). Connects to a standard hose bib or garden hose in USA and Canada..
  • It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25% lead..
  • Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight..
  • Note: Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time..
Check Stock

Gardguard 50ft expandable garden hose With 10 Function Nozzle Expanding water hose Leak Proof retractable garden hose With Solid Fittings 3-Layers Latex (50ft Blue)

  • ... 10 Function water hose Nozzle】: 10 watering modes to meet every watering need. The easy-to-use thumb control design, simple flow control allows for soft delicate showers to high-speed jets. The soft rubber-coated handle makes it very comfortable to hold and anti-slip..
  • 【No More Leaks Durable Hose】: 3/4" solid fittings are more durable than plastic fittings, and this 50ft garden hose is designed for long time. No additional adapters are required to connect the blue garden hose and you can hook it up to your kitchen faucet. Comes with 3 extra rubber rings to extend the life of the Gardguard expandable hose..
  • 【Expandable Without Kinks & Tangle】s: The garden hose 50 ft is soft and lightweight, with an original length of 17 feet (extended from 17 feet to 50 feet), and it can be retracted after water is cut off. Advanced design flexible garden hose will not kink, tangle, kink..
  • 【Advanced Leak-Proof System】: The water hose 50ft use 3-layer latex core and high-density 3300D polyester fabric, which will be thinner than the 3750D, and the gap will be smaller and not easy to enter the sand. It can withstand 3-12 bar water pressure and 41°F-113°F temperature. Even in winter, you don't have to worry about garden hose 50ft breaking due to water press....
Check Stock

POWERTEC 70139 6-to-1 Universal Hose and Fittings Reducer Adapter

  • INCLUDES: 6” to 1” Universal Adapter.
  • FUNCTION: A multi-level step down adapter that allows you to adapt to a variety of hose and fittings to accommodate your dry wet vac hose and....
  • DESIGN: Features a “7 step” stepped design that fits 6”, 5” 4” 3” 2-1/2”, 2” and 1” outer diameters.
  • BUILD: Fittings reducer is constructed out of rugged ABS plastic for abrasion resistance, toughness and long-term durability.
  • CUSTOMIZABLE: Can be cut down to the diameter and customized to suit your individual project requirements (a hack saw is recommended).
Check Stock

15 Feet-MRbrew Homebrew Beer Line Tubing Brewing PVC Plastic Inside Diameter 3/16 Inch Kegerator Keg Draft Co2 Beer Dispensing Hose Kegging Kit with Hose Clamps

  • ...long homebrew beer line can be cut into multiple sections to meet your mutiple kegging needs perfectly..
  • Can be Easily Cut by Cutting Tool: the short length brewing hose kit can not be cut and it can not be applied to your multiple keg dispensing process simultaneously, or the fixed hose fitting kit comes with extra fittings and you need to spend extra money, this 15 feet kegging brewing hose can be cut into any length to meet your needs, you can can equip it with your own brewing dispensing parts, brings great convenience and creative possibilities for your multi-kegging brewing dispensing system..
  • Powerful No Leaking Beer Dispensing Tubing: the inside diameter of this great long kegging dispensing hose is 3/16'', thick enough hose wall prevents the beer tubing kinks and maintains hose shape stability, smoothly transfer beverage without leakage with the help of hose clamps. you can attach this kegerator hose to the 3/16'' beer barb fitting connector to dispense your brewing beer from your beer keg..
  • Reliable Durable PVC Plastic: this 15 feet keg draft beer dispensing line is made of healthy plastic, will not rot, swell, dry out, no ordors and unaffected by normal cleaning compounds, strong oil resistance, smooth surface makes cleaning easy, will not br....
Check Stock

ABN Oxygen Acetylene Hose 1/4 Inch B Fittings Twin Welding Hose Oxy Acetylene Torch Hose Cutting Torch Hoses, 25 Foot

  • Oxy Acetylene torch kit gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate.
  • FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit.
  • Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment.
  • KEEP LINES DISTINGUISHABLE: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely.
  • One rubber hose includes right-handed fitting threads, and the other welder hose includes left-handed fitting threads.
  • Always wear protective welding helmets and welding gloves when working with welding equipment.
  • NO MORE CRACKS: Other welding torch kits often include low-quality plastic hoses that easily crack and leak to create a disastrous fire hazard with imminent failure to look forward to, but this welding equipment oxygen acetylene torch kit hose is constructed from acetylene rubber for maximum strength and durability.
Check Stock

Class A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP

  • 25 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS 33.5” Longest Length (not including fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID V....
Check Stock

Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP

  • 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Check Stock

Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP

  • 20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5....
Check Stock

AK Garage Set of 3 Brass Nozzle/Fittings for Jiggle Siphon Super Simple Siphon

  • Use these fittings with your own 1/2" diameter hose to create your own jiggle or simple simple siphon.
  • Glass Marble Ball - unlike others that use a plastic ball that breaks down or becomes sticky over time.
  • No more need to suck liquids through your transfer hose and run the risk of getting the liquid in your mouth.
  • Great for farms, home, auto, shop, marine, and industrial applications.
Check Stock