Reviews Plasma Cutting Power Sources

Plasma Cutter Machine,MYYWELD Dual Voltage 110/220V 50A，Portable Air Plasma Cutting Equipment Max Cutting Thickness 15mm,IGBT Inverter 1/2\ Clean Cut, High Frequency Cutting

50A Plasma Cutter- plasma cutting can be performed on any type of conductive metal-mild steel, aluminium and stainless are some examples. With mild steel, operators will experience faster, thicker cuts than with alloys..
Dual Voltage-Automatic Dual Voltage / Dual Frequency (110 V/220 V 50/60Hz). Voltage compensation function to deal with fluctuation of the power network..
Safe & Protection- Beautiful plastic panel design. With over-heat, over-pressure, over-current and IP21 level protection, the cutting machine works in a more safer and professional way. Should the plasma cutter be used to an excessive level, or in high temperature environment, poorly ventilated area or if the fan malfunctions the Thermal Overload switched on to cool down inside temperature. The machine will be able to run again when the internal temperature reaches safe level..
High Efficient & Widely Application- Latest IGBT invert technology, equipped with high quality PT31 cutting torch. Fast cutting speed, low noise, and smooth cut just like a hot knife cutting on the butter. Available for cutting most metals: stainless steel, alloy, aluminum, mild steel, carbon steel.
widely used for automotive, ducting work, repair/maintenance, metal processing, manufacture..

These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
Package including 10pcs Electrodes + Tips and 1pc Retaining Cup + 2pcs Drag Shield.
There are 23pcs plasma cutter IPT60 consumables in every package.
The diameter of tips are 0.9mm or 0.035 inches, plasma cutting current is about 30-40A.
They are WS replacement parts, NOT Original plasma consumables kits.

35pcs Plasma cutting consumables kit equivalent to Miller Spectrum 875 cutter ICE-60T ICE-60TM plasma cuttin torch.
Plasma electrode x 10pcs, reference code 212724.
Plasma tip / nozzle x 20pcs, reference code 219676.
Plasma drag shield x 5pcs, reference code 212730.
This is plasma cutting torch aftermarket replacement item which manufactured by WS,not original.

The package will include 20pcs of Electrode, 20pcs of Tip and 2pcs of Drag Shield Cap.
There are 42 pieces plasma cutting torch consumables in the package, Electrode (KP2063-1B1), Tip/Nozzle(KP2062-3B1) and Drag Shield Cup(KP2065-1).
The electrodes, tips and other consumables are fitting in Lincoln PRO-CUT 55/80 plasma cutting torch, not PRO-CUT 25 Plasma Cutting Torch, or PCT20/80 Plasma Cutting Torch.
The diameter or this KP2062-3B1 Tip or Nozzle is 1.3mm or 0.053'', it also lack vortex / swirl device.
All the plasma cutter torch consumables are aftermarket kits and replacement parts, NOT Brand or Original.

[Cutting Thickness] Plasma Cutter 20-45A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V,air pressure 60PSI....
[Blowing Back] Plasma cutting Torch Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and....
[Generator Supported] this plasma cutter 45amp works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V.
[Wildely Application and Low Cost] this plasma cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
[Warranty] buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local....

The electrodes and tips in the list can be used on Miller Spectrum 3080 Plasma Cutter ICE-80CX Torch (Torch Ref. Number: 216300, 218044).
This list contains 10 x 212724 Plasma Electrode.
And 10 x 212726 Plasma Tip / Nozzle + 5 x 212730 Plasma Drag Shield Cup.
The Nozzles or tips plasma cutting current need under 80A.
All the plasma cutting torch consumables for ICE-80CX torch are Replacement Parts, NOT Miller Original Kits.

Pilot Arc Non-touch Plasma Cutter Machine: The pilot arc cutting machine can effectively cut through rough, painted, and rusted surfaces and produce the least slag. The pilot arc technology allows you to cut without touching the metal. So it provides a better cutting quality and longer life for consumables..
Upgrade IGBT Technology: IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. At the same time, it can effectively save energy and improve the life of the machine..
50Amp Dual Voltage 110/220V Machine: Output Current [email protected].
[email protected] and effective cutting thickness: 1/2 Inch (12mm).
Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz).
Dimensions: 15.7" X 10.2" X 13.4" (40*26*34 CM).
Wide Application: The plasma cutter CUT50P suitable for cut aluminum, stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials. Designed for both demanding industrial and construction work, or home and hobby use..

These plasma electrodes and tips can fit Thermal Dynamics CutMaster 42 Cutter and SL40 Plasma Cutting Torch.
There are total 40pcs of plasma cutting SL40 torch conusables in the package.
The plasma electrodes and tips are replacement parts, NOT Thermal Dynamics Original plasma consumables.

These plasma cutting electrodes & Tips can fit in PMX 600 Cutter Torch, Hand Cutting Drag Shield Process.
List contains 5 x 120573 Electrode and 5 x 120826 Tip / Nozzle and 2 x 120828 Drag Shield Cap.
The code just for reference, this NOT means that the plasma kits are original parts.
The plasma consumables are replacements, NOT original!!!.
You will get 12pcs of plasma kits for 600 series torch consumables, for hand held plasma torch.