Reviews Plant Misting Nozzle

Fogland Outdoor Misting System: Portable Misting System 32.8FT Misting Cooling System with 10pcs 0.016\ Orifice Thread Stainless Steel Misting Nozzle for Patio Fan Umbrella

[Easy to install]: Fogland misting system is pre-assembled, just screw the misting nozzle to the tee, and connect the mister system to the appropriate faucet, then ready to use..
[Robust design]: Fogland outdoor misting system equipped with high-quality tubes and tees without breaking or leaking, stainless steel cleanable misting nozzles for anti-blocking. After long-term use, the nozzles can be detachable for cleaning, reducing the cost of use..
[Effective misting&cooling]: Misting produced by the Fogland misting cooling system is very soft, the spray flow rate is moderate, so you don't have to worry about excessive wetting， and the coverage of each nozzle is wider can effectively reduce ambient temperature by 3-10°C or 37-50°F..
[Extensive application scenarios]: Fogland misting system can be widely used in summer outdoor cooling, such as patio, parasols, fog fans, gardens, greenhouses, trampolines, barbecue parties, birthday parties, etc..
[Complete unit]: Fogland misting cooling system is fully equipped with faucet adapters and installation aids that meet the needs of American households. You can use it with confidence..

Check Stock

Outdoor Misting Fan Kit for a Cool Patio Breeze,Water Mister Spray for Cooling Outdoor,19.36FT (5.9M) Misting Line + 5 Brass Mist Nozzles + a Brass Adapter(3/4) Fit to Any Outdoor Fan

★Updated Outdoor Fan to Misting Fans within Seconds★Landgarden pre-assembled misting fan kit is a misting circle with 5 brass misting nozzles,just need binding the misting circle on the patio fan and connect the thread adapter to faucet,delivery the fine mist to significantly cool the air in the hot summer..
★Money Saving & Environment Friendly★Landgarden Mister fan cooling system directly use tap water to spray and cool down,save a lots of money than purchasing a new outdoor mist fan,.no electricity consumption, no energy consumption, pro-environment and healthy than air conditioner..
★Exclusive & Removable Brass Nozzle★ The mist nozzle is made from brass material, no blocking, no rusting(adding water filter if you are located in hard water air or water is not clean enough) and can be used for a long time.
excellent misting effect( Mist range: 20-40inch/nozzle. ).
The well-made Tee connector is good sealing ,no leaking and easy to insert the tubing..
★US Standard 3/4" Solid Brass Adapter★Made from solid brass, so far superior durability than plastic adapter, and not easy to rust. US Standard 3/4" Threaded are widely matching for garden connector, like outdoor faucet, hose splitter, garden filter, garden timer, spray nozzle..

Check Stock

16 Pieces Brass Misting Nozzles Kit Atomizing Nozzle Kit 0.4 mm Orifice 2 Points 1/4 Inch Lock Misting Nozzles with 4 Pieces Plug for Patio Misting System Outdoor Cooling System Garden Water

Package content: comes with 16 x spray seats, 16 x nozzles, 4 x plugs, these spray cooling systems directly use water for spraying and cooling, without electricity, and can save much watering time compared with manual watering, enough for you and your family to use.
Brass misting nozzle: 10/24 thread, 0.015 inch/ 0.4 mm orifice, brass body, including self-sealing O-ring, can be applied without any leak-proof tape or sealant, the nozzle can produce very fine fog to cool the air and lower the temperature in the hot summer.
Reliable brass: the outdoor misting nozzle tees is made of brass material, which has high efficiency, anti-rust and anti-fog performance.
Other parts are made of polypropylene material, with good sealing, no leakage, stable and firm, long service life.
Maintenance and cleaning: hard water, lime and calcium may cause clogging of the atomizing nozzle.
Dip it in vinegar and warm water to clean the nozzle regularly.
When the misting nozzle is blocked by impurities, it can be completely disassembled, which makes it easy to clean.
Wide applications: 1/4 inch lock misting nozzles kits are very suitable for agriculture, terraces, greenhouses, swimming pools, lawns, gardens, cooling systems, irrigation (flowers, grass, vegetable watering), balcon....

Check Stock

mistcooling Patio Misting Accessory Kit

1 – 2 Way “Y” Hose Connector | 3 Nozzle Plugs 10/24 Thread Size | 1 - Inline on/off Valve for 1/4'' OD tube | 3 Way Coupling Tee – ¼ Inch OD Tube.
Push Lock Fittings for Easy Installation.
Residential Misting, Commercial Restaurant Cooling, Industrial Misting System, Sports Misting Mosquito, Misting AC pre-cooling, Agriculture Cooling, Garage Misting, Greenhouse Misting, Humidification, Outdoor Cooling.

Check Stock

Cool-Off Micro-Mist Nozzle- Garden & Patio Misting System Cooling Brass Nozzles with 0.012 Inch Size & 10/24 Inch Thread Pack of 5

MISTING NOZZLES: Want to increase the time you spend in your lawn or patio this summer? Then the Cool-Off Micro-Mist nozzles can upgrade your simple....
HIGH QUALITY: You can have resort-class cooling and comfort in your backyard with these simple misting nozzles that can be attached to your misting....
PERFECT COOLING: The patio cooling nozzles will let you have a wonderful cooling system. This can be used for dust removal or special effects like....
MISTING KIT: This kit contains 5 brass nozzles with nozzle orifice measuring 0.012 inches. Each nozzle has 10/24” thread, that can be hand tightened....
EASY TO INSTALL: The misting system nozzles can be easily installed. The outdoor misting nozzles will give you a wonderful cooling system..

Check Stock

Industrial Misting System - Patio Misting System - 250 PSI Misting Pump, Stainless Steel Tubing - For Residential. Commercial, Outdoor Restaurant and Industrial Misting Application (20 Nozzle System)

Base 20 Nozzle Stainless Steel Mist Kit Includes: 250 psi mid pressure pump with built-in solenoid and filtration 38ft Stainless Steel tubing for push lock (Pre-cut 2ft sections) 22ft UV coated Flexible 1/4" feed line 20- Nickel Plated Push Lock Misting Tees 1- End plug 2- Nozzle plugs 20- Nickel plated brass/stainless steel Nozzles (0.012") Stainless Steel Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
Misting Pump Features : Stainless Steel Mist Line Whisper quiet operation Built in Solenoid Valve Built in Filtration Outdoor Enclosure Wall Mountable Steel Enclosure Max Pump Pressure 250 Psi 110v AC Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable high pressure push lock fittings Stainless Steel Clamps.
Applications Include : Residential Patio Misting Greenhouse Humidification Commercial Outdoor Cooling Outdoor Restaurant Misting Industrial Misting.
Do it yourself misting system, easy to install, with Push to Connect Nickel plated fittings, rated for 1800 PSI..

Check Stock

Misting Cooling System Water Irrigation Fan Misting Mister Kit 33FT (10M) Misting Line + 12 Brass Mist Nozzles + 3/4” and 1/2” PVC Adapter for Outdoor Patio Garden Greenhouse

【Upgrade Quality】: Updated mist system nozzle are made of precision brass, Easy connect,leak-proof and self-sealing Tee Joint ,high quality treated flexible tubing.
【Wide Application】: Misting Cooling System widely apply for garden, landscaping, greenhouse, humidification, outdoor cooling system,swimming pool misting fog cooling and so on.
【Easy to DIY install】: Providing you all the accessories you need for a air cooling and plant misting system,only need 10 minutes to Installs as your idea, delivers very fine mist to significantly cool the air in the hottest summer weather.
【Creating a Cooling Area 】: The fantastic outdoor cooling system provides a water cooling area,release you from the indoor bad air conditions and enjoy the fantastic outdoor sight in hot summer, surrounding air temperatures up to 20 degrees..

Check Stock

Fan Misting Kit, Outdoor Fan Misters for Cooling, Misting Fans for Outside, 19.6FT Misting Line + 5 Brass Nozzles Misters Connects to Outdoor Fan

【 EFFECTIVE MIST COOLING 】 Cools the surrounding area up to 20 degrees or 68℉, misting cooling system helps you beat the heat during this summer..
【 US STANDARD ADAPTER 】 The 3/4'' standard adapter is made of quality PE material, it is more durable, and not easy to rust. Widely matching for garden connector, such as the outdoor faucet, hose splitter, garden filter, garden timer, spray nozzle..
【 UPGRADE HIGH QUALITY BRASS NOZZLE 】 The mist nozzle is made from brass material, 3mm hole of nozzles provide excellent misting effect, cooling the temperature fast. The well-made tee connector is good sealing, and not e.
【 PRE-ASSEMBLED DESIGN 】 Arriving assembled in the package, the misting ring is easy to secure on fans with attach the preassembled misting line with the included cable ties or clips, and then connect to a standard garden hose to immediately experience the benefit of mist cooling..
【 EASY TO USE 】 Atomizing fan kit can be assembled in less than 10 minutes. The exclusive valve on the fan mister hose makes it easier for you to turn on/off misting or adjust to the right amount of spray you want for cooling off in the patio..

Check Stock

H&G lifestyles Outdoor Fan misting for patios Water Mister Cooling Patio Connects Any Outdoor Fan to Convert misting Fan Turns Heat Down by 20 Degrees（Fan not Included）

★Exclusive & Removable Brass Nozzle: The mist nozzle is made from brass material, no blocking, no rusting and can be used for a long time.
excellent misting effect( Mist range: 20-40inch/nozzle. ).
The well-made Tee connector is good sealing ,no leaking and easy to insert the tubing..
★Pre-assembled and easy to use : The misting fan kit is completely pre-assembled,and just connect it to faucet, then use. Delivers very fine mist to significantly cool the air in the hottest summer weather..
★US Standard 3/4" Solid Brass Adapter: Made from solid brass, so far superior durability than plastic menders, and not easy to rust. US Standard 3/4" Threaded to 1/4" Barb,widely matching for garden connector, like outdoor faucet, hose splitter, garden filter, garden timer, spray nozzle..
★Misting cooling &Turn down the heat: Our fan mist kit turns any fan into an air-cooled atomizing fan! In the hot summer, most fans tend to blow hot air, which is very painful. Just install our fan misting kit on the front grill of the existing fan to cool the surrounding air temperature. If you are hanging out in the courtyard, by the swimming pool, on the terrace or anywhere in the house, it is very suitable..
★Save Your Money &Energy conservation and environmental pro....

Check Stock