Reviews Piston Type Pressure Gauge

HPDMC Oil-Free Hookah Dive System Third Lung Serface Vacuum Pump for Snorkeling (550W)

Voltage: 12V storage battery drive（battery is not included）, Power: 550W, Working Pressure: 0.8MPa / 8bar / 110psi, Flow Charging Rate: 60L/min.
2.0cfm, Type: Oil-free pump, no need any lubricate oil to take in, Receiver tank: 10 liters stainless steel..
Working process: Atmosphere air is sucked into cylinder of the compressor, and compressed to reach 0.3mpa – 0.8mPa / 40 psi – 110 psi pressure, through regulator with water separator , then purified by filter. Discharge clean air for diving breathing..
Filtration for breathing air (Active carbon filter): The outlet air purification depends on the activated carbon and molecular sieve, so filter elements must be replaced periodically, especially for breathe purpose. The deepest working distance is up to 30 meters for one hose.
10-15 meters for both if connects to two hoses..
Direct driven type compressor: This air compressor is the main body of the electromechanical air source device. It is the device that converts the mechanical energy of the primary motion (usually the motor) into the gas pressure energy, and is the pressure generating device for compressed air. The pump block unit is composed of crankcase, crankshaft, cylinder, piston, intake and discharge valves, connect rod , beari....

Piston seal adopts v-type sealing ring, good sealing, wear-resistant and stable..
Piston structure, the flow rate is 30% higher than that of traditional diaphragm type..
The valve body structure has overflow port, for fast pressure reduction.
Air compressor pressure valve switch features high accuracy and quick response.
Small size, light weight, and easy to install.

1/4" NPT Air Filter Regulator Lubricator Combination- Cleans ＆ Dry Air, Precise Pressure Regulation, Lubricate Your Equipment with Air (Recommend Lubricator Oil: ISO-VG32)..
Zinc Alloy Body - Higher Hardness and More Compression Resistance than Aluminum Alloy and Plastic Materials..
Piston Type Pressure Regulating Screw - More Durable and Longer Life, Prevent Air Leakage.
5 Micron Brass Filter Element - Excellent Filtering Performance, Much Longer Life and Reuse Feasibility..
Operating Pressure: 0-10 Bar (0-145 psi).
Flow Rate: 68 SCFM @ 90 psi (1925 L /Minute @ 6 Bar).
Temperature Range: 41-140°F（5-60℃)..
Includes Manual Drain & Polycarbonate Bowl with Zinc Alloy Guard, 0-150 psi Gauge & Metal Bracket, a pair of 1/4" NPT Brass Air Coupler＆ Plug Kit, 2 x 1/4" NPT Fitings, 1 x Thread Seal Tape..

1/2" NPT Air Filter Regulator Lubricator Combination- Cleans ＆ Dry Air, Precise Pressure Regulation, Lubricate Your Equipment with Air (Recommend Lubricator Oil: ISO-VG32)..
Zinc Alloy Body - Higher Hardness and More Compression Resistance than Aluminum Alloy and Plastic Materials..
Piston Type Pressure Regulating Screw - More Durable and Longer Life, Prevent Air Leakage.
5 Micron Brass Filter Element - Excellent Filtering Performance, Much Longer Life and Reuse Feasibility..
Flow Rate: 105 SCFM @ 90 psi (3000 L /Minute @ 6 Bar).
Temperature Range: 41-140°F（5-60℃)..
Includes Manual Drain & Polycarbonate Bowl with Zinc Alloy Guard, 0-150 psi Gauge & Metal Bracket, a pair of 1/4" NPT Brass Air Coupler＆ Plug Kit, 2 x 1/4" NPT Fittings, 1 x Thread Seal Tape..

HIGH PRESSURE: 220psi Designed for Road Bike Tires and other Low-Volume Tire Applications..
DURABLE: Crafted from Durable Machined CNC Aluminum with Steel Barrel and Piston. High-Quality Materials..
GAUGE: Equipped with Oversized 3.5" Analogue Gauge for Clear and Accurate Tire Pressure Readings..
HOSE: Equipped with Extra Long High-Strength Hose with Aluminum Couplers..
PRESTA & SCHRADER: Equipped with ABS1 Pro Flip-Thread Chuck System. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement..

Features: Dual source of pneumatic pressure and vacuum | Built-in fine adjust vernier | Needle valve provides controlled pressure release | Selector valve for vacuum or pressure generation | Comfortable and ergonomically designed molded handles | Adjustable stroke..
Model: DPI-2300 | Range: 0 to 600 Kg/Cm2 | Winters Pressure Gauge Range: 0 to 700 Bar | Winters Vacuum Gauge: -1 to 0 Bar/ -1 to 3 Bar..
Material of Construction: SS 304 | Operation: Pressure is generated by the hand operation of the caliper handle which move a piston back and forth resulting in the suction and delivery fluid used for pressure generation. Suitable for use with water/oil | Weight: 2.5 Kg Approx..
Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4.

The Cylinder Leak Detector Kit is designed to easily detect a variety of engine faults, including worn piston rings, worn valves, cracked cylinder walls, and blown head gasket.
The Engine Compression Diagnosis Tester Kit also can check the amount of leakage and locate leaks area in an engine cylinder to help determine the source.
Cylinder compression tester is suitable for work on any petrol engine with 12 or 14mm spark plugs, and ideal for testing trucks & late model cars where clearance is minimal.
Pressure gauge with dual scale reads from 0 to 100 PSI and 0 to 7 Bar, shows pressure in PSI and Bar and percentage of cylinder leakage.

CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
Nitrogen Regulator, Delivery Pressure 0-400 PSI.
Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.

➤Application: Nitrogen regulator is a standard pressure control valve that reduces the input pressure from a liquid or gas that is stored in a pressurized tank.great for HVAC Purging / Inertization / Pressure Tests / Leakage Tests / Brazing / Soldering.
➤Accurate Pressure Gauge: Nitrogen regulator hvac, there are two Easy to Read 2 Inch pressure gauge, which covered with scratch-resistant plastic protective film and rubber cover. 0-4000PSI cylinder gauge, 3000PSI of Max input pressure, 0-600PSI output gauge, 500PSI of Max output pressure. 600PSI of safety output pressure..
➤Connections: Helium regulator, CGA-580 Inlet Connector, fits all Nitrogen, Argon, Helium, and Inert Gas Tanks, 1/4" SAE Male Flare Outlet Connection - 7/16-20 Threads for easy installation.
➤Structure: Nitrogen Regulator 0-600PSI CGA580 Inlet, Solid brass, Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system),Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
➤Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time!.