Reviews Pipe To Tube Adapters

Rubber Cushion Strut Clamp 1" NOM (1-1/8" OD) for Mounting Copper Piping, PEX Pipe, CVPC Tubing to Strut Channels [5 Pack]

  • [QUALITY] Zinc plated to prevent corrosion, the heavy duty steel strut clamp brackets with attached bolt and nut clamp securely over a hard rubber cushion to nearly surround the sides of a pipe or tube..
  • [PROTECTIVE RUBBER CUSHION] The hard rubber cushion protects pipe and tube by absorbing shock caused by vibration and temperature changes, reduces unwanted noise, insulates pipe and tubing from metal surfaces, and prevents galvanic corrosion..
  • [APPLICATION] Insert pipe or tube into rubber cushion inside steel strut brackets. Mount strut clamp legs to 1" NOM (1-1/8" OD) strut channels. Attach nut to bolt and tighten..
  • [CONTENTS] Each of the 5 clamps contain two heavy duty zinc plated steel half brackets with attached bolt, a nut, and protective rubber cushion..
  • [VERSATILE] Use for 1" NOM (1-1/8" OD) copper pipe, PEX pipe, CPVC tube, and other conduit tube, hose, and wire applications. Can be hung vertically and horizontally on walls and ceilings. Compatible with unistruts in 1-5/8", 7/8", 13/16" heights..
Check Stock

NDS 900BKITRTL1PK Square Kit with 2-Opening Catch Basin, 2 Adapters, 1 Outlet Plug, and 1 Plastic Drain Grate, 9-Inch, for Lawns, Landscaped Areas, Black

  • PREVENTS COSTLY DAMAGE: Use the 9x9 catch basin as part of a complete drainage system to collect and direct heavy flows of water to drain pipe and take it away to a discharge point downstream.
  • FITS A VARIETY OF DRAIN PIPES & FITTINGS: Connects to 3 in. & 4 in. sewer and drain, single-wall corrugated, triple wall, and DWV/Sch. 40 pipes, using included outlet adapters.
  • additional outlet adapters sold separately for 6 in. & 8 in. pipes.
  • EASY INSTALL: Keyed side openings easily lock outlet adapters in place, with a cutout guide on the bottom for an additional keyed opening if needed.
  • SOIL-TIGHT FIT: Soil-tight outlet adapters connect to pipe for a secure fit—no tape or glue required.
  • included plug fits inside outlet adapter and seals opening to direct flow of water.
  • KIT INCLUDES: 9 in. Catch Basin Drain with 2 side openings and cutout guide for bottom opening, 2 Outlet Adapters, 1 Plug, 9 in. Square Plastic Black Grate.
  • Additional knock-out weep holes on bottom of basin.
Check Stock

2 Pcs Mini Steel Tube Cutter Tool, Mini Tubing Cutter Pipe Cutter Tube Cutter Tool of Diameter from 1/8 to 1-1/8 Inch (3-28 Mm), Tube Pipe Cutter for Copper Brass Aluminum, Thin Stainless Steel Tube

  • Mini Tubing and Pipe Cutter: our tubing cutter is especially designed to assist plumbers, electricians and mechanics.
  • It is made of heavy duty alloy steel, this tube cutter mainly use for cutting copper, brass, aluminum and thin steel pipes.
  • Tube pipe cutter makes clean and precise cuts.
  • Various Tube Cuts: this tubing cutters will efficiently cut copper, brass, aluminum, thin steel and PVC pipes with 1/8 to 1-1/8 inch (3-28 mm) outer diameter.
  • This mini tube cutter provides a fast way to do a clean cut.
  • Convenient and Powerful: our small pipe cutter fits nicely in restricted spaces.
  • The mini steel tube cutter tool features a strong yet lightweight slide and wheel housing and large knurled screw knob for easy control of cutting pressure.
  • Large knurled feed screw knob provides users with ultimate cutting pressure control to produce clean cuts.
  • Multifunctional Pipe Cutter: this tube cutter tool fits for use on construction sites, plumbing jobs, HVAC and refrigeration, heating, manufacturing, decorating or even at garage repair shops and so on.
  • Specifically designed for use in restricted spaces to make tight cutting jobs significantly easier and more manageable.
  • Easy to Operate: cutting thin stainless steel tubing has never been easier.
Check Stock

EVIL ENERGY AN6 Flare Cap Tube Fitting Hex Head Port Fitting Adapter 2PCS Aluminum

  • 6AN Flare Cap Tube fitting maximum pressure of the fitting is 4000psi (275bar) and the working temperature range is -65º F to 252º F, manufactured....
  • AN flare caps will block off fuel hose line prevent dirt and debris from entering the external threaded hose fittings and adapters..
  • Female pipe plug nut fitting universal application for Diesel, E85, Water,Air Line. The surface is black anodized for great appearance and....
  • Accessories can be used either temporarily or permanently. Cap block off nuts are 100% reusable..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a product and service..
Check Stock

ABN Bubble Flare Tool & Double Flaring Kit – Tubing Bender Flare Tool & Pipe Cutter (1/8in to 5/8in / 3-16mm)

  • ... pipes, lines, braking pipe repairs, water, gas, refrigeration, and more.
  • Fixed head and angles make clean, precise flares.
  • Yoke type compressor with T-bar handle for firm grip.
  • For 3/16″, 1/4″, 5/16″, 3/8″, 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing.
  • QUICK & PRECISE CUTS: Use the included small pipe cutter to cut 1/8-inch to 5/8-inch (3-16mm) steel, aluminum, and copper tubing.
  • Pull back the blade and revolve the pipe while compressing.
  • 2 rollers prevent skipping and jumping for most consistent tracking.
  • Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut.
  • BUILT TO LAST: Swivel constructed from chrome-plated alloy steel to reduce friction.
  • Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion.
  • EASY STORAGE: Heavy-duty 11.9” x 2.8” x 9.2” inch (30.2cm x 7.1cm x 23.4cm) plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization.
  • Includes double flaring and bubble flaring instructions for use.
  • PACKAGE CONTENTS: Package includes hardened flaring bar assembly clamps with 10 SAE & metric tubing siz....
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • ...40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fittings Kit: The air brake fittings contain 34 pcs. 10 PCS: Male Connector 3/8" tube (NPT Pipe Thread: 2 pcs 1/2", 2 pcs 3/8" ), Male Connector 1/2" tube (NPT Pipe Thread: 2 pcs 1/2" , 2 pcs 3/8", 2 pcs 1/4"). 10 PCS: Male 90° Elbow connector 3/8" tube (NPT Pipe Thread: 2 pcs 1/2", 2 pcs 3/8" ), Male Connector 1/2" tube (NPT Pipe Thread: 2 pcs 1/2" , 2 pcs 3/8", 2 pcs 1/4"). 6 PCS: (2 pcs) Tube Tee 1/2" tube, (2 pcs) Tube Tee 3/8" tube, (2 pcs) Tube Tee 1/4" tube. 6 PCS: (2 pcs) Tube Union connector 1/2" tube, (2 pcs) Tube Union connector 3/8" tube, (2 pcs) Tube Union connector 1/4" tube. 2 PCS: Schrader Valve 1/4" tube ..
Check Stock

AGOOBO PVC Pipe Cutter, Up to 2-1/2 inch, Ratchet PVC Pipe Cutter SK5 Sharp Blades, Pipe Tube Cutter for PVC PPR PEX Plastic Hoses and Plumbing Pipe

  • 【High Quality and Safety】The durable tube cutter are made of manganese steel that is high hardness, good toughness, strength and durable. Our blade SK5-42mm is imported from Japan. PVC Pipe Cutters is ideal for use on a variety of plastic pipe and tube. The Pipe Cutter handle design Lightweight, and the blade is thick and sharp. Make work easier. And It process heat-treated to make the blade more sharp, durable and not easy to break. At the same, it is not easy rusting..
  • 【Ergonomics Design】 The professional tube cutter adopts ratchet drive technology to greatly save your strength. Powerful and do not require much strength to cut pipe. The powerful bite force makes the work easier. The fish handle is for added comfort, which guarantees long-lasting working. The tube cutter can improve work efficiency by fast cutting. User can cut pipe within 5 to 20 seconds, comfortable design for easy cutting and less hand fatigue..
  • 【EASY TO OPERATE】Tubing cutter built with comfortable, ergonomic, textured handles that provide a reliable grip. Spring-loaded handles allow for faster positioning of easy, single stroke cuts. In the bottom of the tube cutter, there has a stainless buckle. When you don’t use it, you can buckle the safe lock. The tube cutter wi....
Check Stock

Zantlea Pipe and Tube Cutter, Ratcheting Hose Cutter One-hand Fast Pipe Cutting Tool with Ratchet Drive for Cutting Less Than 1-1/4\ O.D. PEX, PVC, and PPR Pipe

  • 【High Quality and Safety】The durable tube cutter are made of manganese steel that is high hardness, good toughness, strength and durable. Our blade SK5-42mm is imported from Japan. PVC Pipe Cutters is ideal for use on a variety of plastic pipe and tube. The Pipe Cutter handle design Lightweight, and the blade is thick and sharp. Make work easier. And It process heat-treated to make the blade more sharp, durable and not easy to break. At the same, it is not easy rusting..
  • 【Ergonomics Design】 The professional tube cutter adopts ratchet drive technology to greatly save your strength. Powerful and do not require much strength to cut pipe. The powerful bite force makes the work easier. The fish handle is for added comfort, which guarantees long-lasting working. The tube cutter can improve work efficiency by fast cutting. User can cut pipe within 5 to 20 seconds, comfortable design for easy cutting and less hand fatigue..
  • 【EASY TO OPERATE】Tubing cutter built with comfortable, ergonomic, textured handles that provide a reliable grip. Spring-loaded handles allow for faster positioning of easy, single stroke cuts. In the bottom of the tube cutter, there has a stainless buckle. When you don’t use it, you can buckle the safe lock. The tube cutter wi....
Check Stock

FGJQEFG 3 Inch DIY Custom Mandrel Exhaust Pipe Tube Pipe, 40 Inch Straight Pipe, 3''OD Straight & Mandrel Bend Pipe(45/90 Degree) Kits, T304 Stainless Steel, Universal Fitment - 3PCS

  • 【Material】Universal DIY Custom Mandrel Exhaust Tube Pipe Made of High-Quality T-304 Stainless Steel, Strength and longer life, Excellent resistance to corrosion and oxidation resistance..
  • 【Size】Outside Diameter: 3 Inch / 3'', Bending Angle: Straight/45/90 Degree..
  • 【Easy To Use】Construction to maintain OD/ID size integrity for easier installation, Polished pipe is great for DIY project..
  • 【Package Includes】1 X Straight Tube Pipe, 1 X 45 Degree Tube Pipe, 1 X 90 Degree Tube Pipe(100% Brand new, Never been tried or installed). Efficient packaging to save on non-box and oversize fees..
  • 【Applications】Universal Fitment(Exhaust system or industrial materials). Easy for common exhaust systems. (Professional installation is highly recommended, Instruction is not included)..
Check Stock