Reviews Pipe Fitting T Equal

FORMUFIT 3/4\ PVC Fittings, 3-Way Corner Connector, Furniture Grade, Orange (8-Pack) - for Greenhouse, PVC Pipe Furniture, Maker Projects | Fits 3/4 inch PVC Pipe - F0343WE-OR-8

  • EASY TO USE: The FORMUFIT PVC 3-Way Corner Fitting is the fastest and most effortless way to build structural PVC projects with 3/4" PVC pipe. With these PVC fittings (3/4 inch), you can make cubes, PVC pipe furniture, boxes, or right-angle configurations which require a corner or three-point connection. This PVC 3-Way Connector has three (3) extra-deep sockets on separate planes at 90 degrees to each other..
  • GENUINE FURNITURE GRADE PVC: FORMUFIT 3-Way PVC Corner fittings are 3/4" PVC fittings that are injection-molded using ultra-strong, premium furniture grade PVC resin.
  • a superior engineered plastic designed for outdoor use, weatherability, and can be used in direct sunlight. UV resistance maintains fitting durability and appearance through years of exposure to varying weather conditions. In addition, this 3/4" PVC elbow has an impact strength that is five times as strong as other PVC pipe connectors due to the formulated impact modifiers..
  • SAFE AND NON-TOXIC: FORMUFIT 3Way PVC Fitting products are approved for fluid handling in hydroponics, aquaponics, residential irrigation, and aquarium use. These 3/4" PVC pipe fittings do not contain heavy metals, off-gassing phthalates, dioxins, or calcium cobalt filler as seen in imported, imitation/look-a-lik....
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

boost/vacuum gauge silicone coupler adapter - Car Turbocharger Pipe Fitting Universal Turbocharger Silicone Boost Pipe Hose Nipple Turbo Vacuum VAC Gauge Fitting TDI

  • Wide Application---The turbocharger pipe fitting is suitable for a 4mm inner diameter pipe. 100% brand new aftermarket Boost Pipe Fitting that has never been used.
  • For Boost Gauge---This boost hose nipple fitting allows you to fit a boost gauge or any other type of instrument where vacuum or boost pressure is required.
  • Superior Quality Aluminum Alloy---The turbo boost pipe hose nipple is made of high quality aluminum alloy and durable to use. The manufacture of the fitting meets the strict quality requirements.
  • Easy Installation---The turbocharger mounting kit is easy to install, simply drill a 8mm hole in your silicone boost pipe and push the nipple through the hole (from the inside), put on the sealing o-ring, washer and tighten down with the nut.
  • Quality Assurance---As a professional seller, we provide high quality products and considerate services. Every product must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.
Check Stock

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

  • Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
  • Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
  • Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
  • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
  • Thick formula fills gaps in large diameter pipe and loose fitting joints.
  • Recommended for potable water, pressure pipe, conduit and DWV.
  • Recommended application temperature 40°F to 110°F / 4°C to 43°C.
Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • ...e puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fa....
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • ...ssion sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nu....
Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

  • CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
  • CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
  • Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
  • To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
  • The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock

Parker Hannifin 12-12-12 FT-SS Stainless Steel Female Tee Pipe Fitting, 3/4\ FNPT x 3/4\ FNPT x 3/4\ FNPT

  • T-shaped pipe fitting for connecting and branching three pipes.
  • Female National Pipe Taper (NPT) threads on run and branches for connecting male pipes.
  • Made from stainless steel 316 for strength.
  • Higher corrosion resistance than stainless steel 304.
  • NPT thread for compatibility with other threads.
Check Stock