RIDGID 19238 NaviTrack Scout Locator, Underground Pipe Locator and Underground Cable Location Device & 16728 Remote Transmitter (512 Hertz Sonde) for Underground Pipe Location,Red/Black,Small
- Product 1: Multi-directional antenna technology sees the entire signal all of the time - maximize the signal strength to find the target pipe, sonde, or energized line.
- Product 1: Underground pipe locator verifies position using a micro-mapping display to mark distinctive poles in front of and behind the target, ensuring an accurate locate.
- Product 1: When using as underground cable locator or pipe locator, the Navitrack Scout automatically calculates and displays depth when oriented over the target..
- Product 1: Meets FCC Class B and EN 55022 Class B - operates in these standard frequencies: Sonde - 16 Hz, 512 Hz, 640 Hz, 874 Hz and 33 kHz.
- Line Trace - 128 Hz, 1 kHz, 8 kHz and 33 kHz.
- Product 2: Attach remote transmitter to drain cleaning cable or a water jet hose to locate pipe underground.
- Product 2: Flashing LED to indicate that sonde is transmitting and ready to operate as a beacon during underground pipe location.
- Product 2: Meets FCC Class B and EN 55022 Class B requirements.
- Product 2: Adapters (catalog # 19263, 19268, 19273, and 19258) attach transmitter to drum machine or sectional cables provide versatility in locating underground pipe and line detection.
Check StockCrush Proof Tubing 3' Service Station Kit
- CRUSHPROOF- Even the heaviest vehicles won’t smash it.
- VERSATILE- Kit includes adapters so two hoses can be connected to make a longer length, can be set up for single or dual exhaust vehicles.
- HEAVY DUTY- More heat resistant and flexible than standard hoses, withstands up to 600 degrees F.
- GREAT FOR- use on passenger car tailpipes 2-1/2-Inches or smaller in diameter, or use a tailpipe adapter to fit with other pipe sizes.
- SPECS- Kit includes (2) 3″ x 4′ FLT300 Crushproof Hose.
- (1) RY30 Y-Connector for 3″ Hose (Rubber).
- (2) F300 3″ Tailpipe Adapters with Hook & Chain.
- (1) SP30 3″ Rubber Splice Connector – connects two lengths of hose.
Check StockJohn Boos GT-8 Carbon Steel Grease Interceptor 14.2 Long by 11.2 Tall by 10.5 Wide 8 lbs Grease Capacity
- This Grease trap has an 8 pound grease capacity and measures 14.2" Long by 11.2" Tall by 10.5" Wide. It measures 2" from top to pipe opening, 7.5" from pipe opening to base.
- Made from TIG welded 11 gauge (1/8 inch thick) carbon steel with a corrosion resistant coating.
- Grease Trap features a non skid cover (deck plate) with locking device and removable baffle ensure lid stays securely closed..
- T-Vent Pipe (Flow Control Tee) is included. Both ends of the Grease Interceptor accept no-hub adapters for steel or plastic.
- This commercial Grease Trap/Grease Interceptor is certified by the Plumbing and Drainage Institute.
Check Stock
7 Pieces Faucet Adapter Kit, Kitchen Sink Brass Aerator Adapter Male/Female Faucet Adapter to Connect Garden Hose, Water Filter, Standard Hose via Diverter
- Apply to: these faucet hose adapters can fit most types of faucet, convenient for you to attach garden hoses, sink sprayers, water filters and more, will not leak easily and can bring you a nice using experience.
- Will not fit a bathtub spout, shower pipe, or pump style faucet, they do not have removable aerators, which means our threaded adapters cannot connect to these types of faucets.
- Compatibility: these faucet adapters are only compatible with sink faucet with removable aerators, if your sink faucet does not have a removable aerator, these adapters will not work, please check carefully before purchasing.
- Size information: 7 common sizes are offered to you, including male 15/16 inch-27 T, male 55/64 inch-27 T, male 3/4 inch-27 T, male 3/8 inch-18 T, female 3/4 inch-27 T, male 13/16 inch-27 T, male 15/16 inch-27 T or female 55/64 inch-27 T X GHTM 3/4 inch or Male 55/64 inch-27 T, which can meet your different needs, please check carefully before purchasing.
- Quality material: these faucet hose adapters are made of brass, durable and safe to use, not easy to break and rust, wear-resistant and sturdy, exquisite in workmanship, convenient to carry and store, will provide you a long-term service.
- Package contents: you will receive 7 pieces of faucet adapte....
Check StockNDS 422G 4' Pop Up Drainage Emitter with Elbow, 4 Inch, Color may vary
- Works with a complete drainage system to release collected stormwater runoff and standing water to a discharge point before it causes costly property damage. Provides collected water a point of release at water-safe areas downstream and away from structures, erosion-prone landscapes, and poor drainage areas.
- Elbow connects to 4 in. sewer and drain pipe, no fitting necessary.
- connects to other pipe types using appropriate adapters. Releases collected water up to 40 GPM. Supports pedestrian traffic including lawn tractors, when properly installed.
- Pop-Up Drainage Emitter comes with elbow securely attached for an easier install. Outside flange prevents grass from growing over the cover.
- Cap, or cover, pops up as high as 1 in. once water pressure builds.
- closes as flow diminishes. Small weep hole in elbow drains out any water in the pipe to prevent stagnation or freezing in cold weather.
Check Stock
SUMMERBUDDY Type B Hose Adapter & Plunger Valve & Pool Hose Holder for Above Ground Swimming Pool, 1.25' to 1.5' Pool Hose Adapter B & On/Off Plunger Valve for Threaded Pumps (2 Packs)
- 【Multifunctional】This pool hose adapter is used for saltwater system of above ground swimming pool. If your pool inlet/outlet and pipe holder are 1.25" , but you want to install a 1.5" plunger valve, the adapter B will be the perfect solution..
- 【Waterproof】The rubber ring or band on adapter B and plunger valve tightly with other pool parts to form a sealed space to prevent water leak..
- 【Convenient】If you want to replace the filter element or upgrade a stronger filter, the plunger valve will help you to control water flow..
- 【Safe】The pool pipe holder reduce the pressure of the water pipe on the pool wall, thereby reducing damage to the pool..
- 【Easy installation】The pipe holder is installed between adapter B and inlet or outlet. The big end of pipe holder attach to 1.25" pool inlet or outlet. And the small end of the holder attach to small end of adapter B, then fixed them with clamps. Last, the big end of adapter B attach to the threaded end of plunger valve, simply screw it on.(Contains 2 adapters B, 2 plunger valves, 2 pipe holders).
Check Stock
5 Pieces Faucet Adapter Kit, Brass Aerator Adapter Male Female Sink Faucet Adapter Connecting Garden Hose, Water Filter, Standard Hose via Diverter
- What you get: there are 5 pieces of brass faucet adapters in 1 package, available in 5 different size, enough quantity to meet your different needs, or you can share them with family and close neighbor, making life more convenient.
- Wide applications: these brass aerator adapters are suitable for most common sinks and most types of faucet, which makes it convenient for you to connect garden hoses, sink sprayers, water filters and more, not easy to leak, preventing water leakage.
- Sturdy brass: made of sturdy brass, these sink faucet adapters are with nice rust and corrosion resistance, wear-resistant and sturdy to use with nice workmanship, which are portable to carry and easy to store, long term to apply in daily life.
- Size details: aerator adapters in 5 most common male and female sizes for you, female 13/16 inch-24T, female 3/4 inch-GHT, female 3/4 inch-27T, female 13/16 inch-27T, male 15/16 inch-27T or female 55/64 inch-27T x GHTM 3/4 inch or male 55/64 inch-27T, which can connect female garden hose to male or female faucet, and connect male or female aerator to male or female faucet.
- Not suitable for: this faucet adapters kit is only compatible with sink faucet with removable aerators, not suitable for sink faucet that doesn’t have a removable a....
Check StockProfessional Sports Ball Air Inflator Needle 3 pc Air Needle w/Adapter for Air Hose
- Inflate footballs, basketballs & soccer balls with the same tool used by professional sports teams.
- Converts needle inflator to match 1/4" fittings on standard 3/8" air hose for precision inflating.
- 3-piece set includes non-rusting stainless steel 1-1/4" needle with side & tip air outlets.
- 2 solid brass adapters step-up needle male pipe thread from 5/16" to 1/2" OD to fit 1/4" pipe size.
- Closely-machined NPT threads form seal when torqued to provide non-leak performance.
Check StockVEVOR Hydraulic Flaring Tool Kit 45° Flaring Tool Set Brake Repair Brake Flaring Tools for 1/4 -3/8 Brake Flare Tool with Tube Cutter and Deburrer Tube Flaring Tools for Copper Lines
- Tube Expanding Functions: This hydraulic flaring tool is equipped with φ 1/4", 5/16", 3/8" expanding dies and adapters, including 45° flaring cone,....
- Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with....
- Pipe Cutting & Deburring: The flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging....
- Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a....
- Wide Application: This hydraulic flaring tool kit is suitable for expanding copper and stainless steel piping. It is an excellent tool for repairs on....
Check Stock 
