Reviews Pin Backs

50 PCS Metal Locking Pin Backs, Pin Keepers Locking Clasp Silver

  • Our pin backs the top diameter is 10mm and the bottom is 7mm, 6mm in height..
  • No tools required, easy to remove one hand pulls the end of the pin back and the other hand pulls the badge..
  • Great for use in display books, on lanyards, bags, vests, badge and hats..
Check Stock

100 Pcs Silver Safety Pins 1 Inch Pin Back Clasp Brooch Pins Backs with 3 Holes Safety Locking for Making Corsage, Name Tags, Badges, Citation Bars

  • Size —— The package including 100(±2%) pieces brooch clasps, each flat brooch pin sizes approximately 0.98 inches long..
  • Robust and secure — Bar pin brooch clasp is made of iron. Stainless steel plated, not easy to rust and damage.
  • and these are incredibly sturdy and secure..
  • Smooth to Fasten & Secure — These pin backs with locking function and have clasps that are reasonably easy to open and shut, securely fixed..
  • Easy to Attach — These brooch pins backs with 3 holes and are flat on the back.
  • Pin backs can be glued or directly onto any surface to DIY crafts..
  • Widely Used —These bar pins are excellent for making brooches or replacement to your torn or lost one.
  • And be applied to tie tacks, badge insignia, citation bars, name tag, etc..
Check Stock

Brass Clutch Badge Insignia Clutches Pin Backs Replacement (Gold, 50 Pieces)

  • Material: the small clutch is made of quality nickel plated brass.
  • Unnoticeable while lock pins firmly and keep them secure.
  • Metal material makes it anti-wear, sturdy.
  • Package contents: each clutches pin size is approximately 10 mm in diameter, packaged in clear plastic case for neat storage.
  • Quantity are enough for replacement to your torn or lost one.
  • Exquisite design:clutch pin backs are great match for most metal pin.
  • clutch provides good grip of pin to keep it stay in place.
  • With its firm and protective grip, rest assured that you will never lose another pin again.
  • Easy to use: featuring a spring-loaded fastener, these pin backings are easy to put on and take off.
  • Simply push to secure onto pin post and pull the trigger while holding onto your pin to release.
  • These locking pin backs are a great alternative to rubber clutches.
  • Wide usage: the metal pin back can be applied with tie tacks and lapel pins that have lost their backings, or with your own homemade craft pins.
  • Can also be applied as the back of lapel pins, hat, tie tacks, name tag, toy pins, citation bars, service bar, etc..
Check Stock

ARTIBETTER 100Pcs Rubber Pin Backs Butterfly Clutch Holder Replacement Star Shaped Badge Pin Backs Tie Tacks Clutch Pin Cap Keepers Pin Locks for Lapel Brooch

  • The pin back is tight and not easy to fall off..
  • Use for lapel pin, tie tacks, citation bars, service bars and jewelry..
  • Great replacement for pin clutch backs, these pin backers are a must- have for your uniform, holding badges or name tags..
  • Light weight and portable, easy to carry and store..
  • Made of material, these pin backs provides good grip of pin, keep it stay in place..
Check Stock

BEADNOVA 100PCS Butterfly Clutch Pin Backs Locking for Enamel Pin Backs Lapel Pin Backs (Silver, 100 pcs)

  • PACK INCLUDES: 100pcs clutch backs in silver color. Clutch back is 11.5mm in diameter, 5mm in height..
  • STURDY AND LIGHT MATERIAL: Butterfly clutch pin backs are made of copper. No tools required, these butterfly clutch with spring fastener allow you to put on and remove it easily, handy and convenient for use..
  • GOOD PRICE FOR REPLACEMENT: Pack of 100pcs butterfly clutch, enough for replacement to your lost or torn label pins, service bars, name tags etc. This great value pack is also a good supply for diy jewelry and craft making..
  • STORAGE BOX: Come with plastic storage box, you can store butterfly clutch pin keepers neatly..
  • WIDE APPLICATION: Butterfly clutch tie tacks pin backs can be applied to tie tacks, badge, service bars, name tag, toy pins, jewelry making, DIY craft projects, etc..
Check Stock

GooDay 1200 PCS 8MM Hypoallergenic Stainless Steel Earrings Posts Flat Pad Blank Earring Pin Studs with Butterfly Earring Backs and Silicone Bullet Earring Backs for Jewelry Making Findings

  • Material：Earring post for jewelry making is made of stainless steel, anti corrosion and stain resistant, durable and sturdy, lightweight, easy to use and keeps a long time.
  • Size: Earring posts pin is 12 mm/0.47" in length, 8 mm/0.2" pad in diameter, 0.7 mm/ 0.028" pin thickness, the silver earring backs is 6 mm/0.24" in length, 3 mm/0.12" in thickness.
  • Function: Earrings posts with flat pad allows you to DIY your earring finding with some rhinestone and crystals flatback via hot liquid glue, tweezer help you easily DIY craft.
  • Application: Earrings backs fit to most of the earrings posts, good replacement for your lost earring back and earring post,you can use it for your party,daily use, activities and gifts.
  • Package: 200 Pairs/400 Pieces earring pin studs, 200 pairs butterfly earring backs, 200 pairs silicone bullet earring backs, a large amount earring posts and earring studs can meet your requirement.
Check Stock

Waybas 1200 PCS 5MM Hypoallergenic Stainless Steel Earrings Posts Flat Pad Blank Earring Pin Studs with Butterfly Earring Backs and Silicone Bullet Earring Backs for Jewelry Making Findings

  • Material：Earring post for jewelry making is made of stainless steel, anti corrosion and stain resistant, durable and sturdy, lightweight, easy to use and keeps a long time.
  • Size: Earring posts pin is 12 mm/0.47" in length, 5 mm/0.2" pad in diameter, 0.7 mm/ 0.028" pin thickness, the silver earring backs is 6 mm/0.24" in length, 3 mm/0.12" in thickness.
  • Function: Earrings posts with flat pad allows you to DIY your earring finding with some rhinestone and crystals flatback via hot liquid glue, tweezer help you easily DIY craft.
  • Application: Earrings backs fit to most of the earrings posts, good replacement for your lost earring back and earring post,you can use it for your party,daily use, activities and gifts.
  • Package: 200 Pairs/400 Pieces earring pin studs, 200 pairs butterfly earring backs, 200 pairs silicone bullet earring backs, a large amount earring posts and earring studs can meet your requirement.
Check Stock

GooDay 600 PCS 8MM Hypoallergenic Stainless Steel Earrings Posts Flat Pad Blank Earring Pin Studs with Butterfly Earring Backs and Silicone Bullet Earring Backs for Jewelry Making Findings

  • Material：Earring post for jewelry making is made of stainless steel, anti corrosion and stain resistant, durable and sturdy, lightweight, easy to use and keeps a long time.
  • Size: Earring posts pin is 12 mm/0.47" in length, 8 mm/0.2" pad in diameter, 0.7 mm/ 0.028" pin thickness, the silver earring backs is 6 mm/0.24" in length, 3 mm/0.12" in thickness.
  • Function: Earrings posts with flat pad allows you to DIY your earring finding with some rhinestone and crystals flatback via hot liquid glue, tweezer help you easily DIY craft.
  • Application: Earrings backs fit to most of the earrings posts, good replacement for your lost earring back and earring post,you can use it for your party,daily use, activities and gifts.
  • Package: 100 Pairs/200 Pieces earring pin studs, 100 pairs butterfly earring backs, 100 pairs silicone bullet earring backs, a large amount earring posts and earring studs can meet your requirement.
Check Stock

24 Sterling Silver Lever Back Earrings Earwire Findings

  • Package includes:Comes with 2 different sizes of earring posts, including 50 pairs 4mm earring pin studs, 25 pairs 6mm earring pin studs, 100 pieces butterfly earring backs and 200 pieces rubber bullet earring backings. (1 inch=25.4mm or 1mm=0.0393 inch)cks fit to most of earrings, it is a good replacement for your losing earring backs and earrings.
  • Safety Material:Both the jewelry posts and the butterfly earring backings are made of stainless steel,anti corrosion and stain resistant, durable and not rusty,lightweight.The clear bullet earring backs are made of rubber, non-toxic, so you don't have to worry about ear allergies..
  • Good replacement:Our flat pad earring studs are sturdy and easy to use, 2 sizes give you more choices and more combinations.please heat and rub the studs with alcohol before use. Earring backs fit to most of earrings, it is a good replacement for your losing earring backs and earrings.
  • Perfect DIY Making:Earrings posts with with Flat head design is more convenient to stick, ,Just use hot liquid glue to stick gems or small pattern accessories on the earrings post flat pad,making your homemade stud earrings a unique personality.cks are made of rubber, non-toxic, so you don't have to worry about ear allergies..
Check Stock