Reviews Picatinny Scope Rings

Monstrum 4-12x44 Rifle Scope with AO Adjustable Objective | Includes High Profile Scope Rings

Adjustable 4-12 times magnification, for targeting out to 600 yards and beyond.
An adjustable objective lens or AO - that allows for sharper focus of the target image, elimination of parallax, and range estimation.
Aircraft grade 6061 aluminum scope body with a sealed, nitrogen-charged tube for resistance to water and fog.
Precision 1/4 MOA/click windage and elevation adjustments with locking turrets.
Available with High Profile Picatinny/Weaver Scope Rings or with an Offset Picatinny Scope Mount.

Fits on any Weaver or Picatinny-style mount.
Ideal for tactical use/Also great for hunting rifles, slug guns, and muzzleloaders.
Optional Picatinny rail on top of ring allows for attachment of accessories on top of a mounted scope.

Built specifically for long range scopes - 6-24x magnification scopes and above - with 3 inches of spacing between scope rings to accommodate scopes....
Lightweight one-piece scope mount for mounting standard 1 inch diameter tube rifle scopes - with weight comparable to a set of lightweight rings,....
Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle....
2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.

1.35 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
34 mm diameter rings for mounting standard 34 mm rifle scope tubes.
Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.

1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
34 mm diameter rings for mounting standard 34 mm rifle scope tubes.
Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.

0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.

Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 9/2021 (Serial numbers below N936371), purchase the old Pre 9/2021 compatible mount. For models manufactured after 9/2021 (Serial numbers above N936371), purchase the new Post 9/2021 compatible mount..
Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
All Monstrum scope mounts and accessories come with a lifetime guarantee.

XTR SIGNATURE RINGS – These rings were designed for the tactical shooter and deliver plenty of holding power with less weight..
IDEAL MOUNTING ACCESSORIES – These mounting rings let you virtually sight your gun without moving the scope adjustments..
SIGHT MOUNT – There is no need for tapered bases or shimming for thousand-yard shooting with these mount rings..
TACTICAL MOUNTING RINGS – Count on the revolutionary Pos-Align Inserts technology in a tactical ring configuration for centering your scope..
RUGGED BURRIS RINGS – Save weight with these aluminum tactical rings that mount on any Picatinny and most Weaver style rails..

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
1 inch diameter rings for mounting standard 1 inch rifle scope tubes.
Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
Available in three heights to match your needs: Medium Profile 1.00 inch, High Profile 1.20 inch, and Extra High 1.35 inch.