Reviews Permatex Cold Weld Epoxy

Permatex 80645 Low VOC Gasket Remover

  • Suggested Applications: Use for all solvent-based gasketing, anaerobic gasketing and gasket sealant products. Use to remove Permatex Form-A-Gasket, Spray-A-Gasket, Indian Head, High-Tack, Tack & Seal and Super High Tack gasketing products. This Gasket Remover is NOT recommended for silicone gaskets (use Permatex Silicone Stripper – part number 80649)..
Check Stock

J-B Weld 50151 WoodWeld Epoxy Syringe - Light Tan -.85 fl. oz.

  • J-B WELD WOODWELD: A quick setting and multipurpose two part epoxy that provides a strong and lasting bond on wood surfaces J-B Weld WoodWeld is perfect for DIY wood repair and wood projects by creating a bond stronger than wood J-B Weld WoodWeld now comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, WoodWeld takes 6 minutes to set and 1-3 hours to cure J-B Weld WoodWeld set and cure color is light tan.
  • STRENGTH: J-B Weld WoodWeld has tensile strength of 1800 PSI.
Check Stock

J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Tan - 25 ml

  • J-B WELD PLASTICBONDER (Tan): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond....
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours....
  • STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI..
  • SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and....
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
Check Stock

PC Products PC-AutoBond Epoxy Adhesive Paste, 1oz Double Syringe, Metallic Gray 81112

  • Cold weld epoxy adhesive paste to bond metal, rubber, fiberglass, and glass in automotive applications.
  • Forms a tough bond that flexes to provide impact and vibration resistance.
  • Continuous service temperature range from -20 to +250 degrees F.
  • Provides work time of 8 minutes and full cure time of 12 to 24 hours (at 75 degrees F).
Check Stock

J-B Weld Plastic Bonder Black 25ml Syringe - 2 Pack (50139-2), 25 ml - 2 Pack

  • ... Surface Applications: Thermoset & Carbon Fiber Composites, Thermoplastics And Coated Metals, Plastic & Pvc, Concrete, Ceramic & Tile, Fiberglass, And Aluminum.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

J-B Weld 50112 ClearWeld 5 Minute Set Epoxy Syringe - Clear - 25 ml

  • J-B Weld Clearweld: A Clear, Quick Setting And Multipurpose Two Part Epoxy That Provides A Strong And Lasting Bond On Surfaces Including Metal, Tile, Most Plastics, Ceramic, Glass, Wood And More. J-B Weld Clearweld Comes In A Syringe Allowing For An Easy 1:1 Mix Ratio. The Unique Syringe Has A Re-Sealable Cap That Prevents Drying Out And Leaking, Allowing For Multiple Uses.
  • Cure And Set Time: After Mixing The Two Part Formula With The Included Mixing Tray And Stir Stick, Clearweld Takes 5 Minutes To Set And 1 Hour To Cure. J-B Weld Clearweld Set And Cure Color Is Clear.
  • Strength: J-B Weld Clearweld Has Tensile Strength Of 3900 Psi.
  • Surface Applications: Metal, Most Plastics, Pvc, Wood, Concrete, Ceramic & Tile, Fiberglass And Glass.
Check Stock

J-B Weld High Heat Epoxy Syringe, Dark Grey

  • J-B Weld HighHeat is a two-part epoxy system that provides strong, lasting, heat-resistant repairs up to 550°F. Mixed at a ratio of 1:1, it forms a permanent bond that has a 4730 PSI strength and is chemical and fuel resistant. At room temperature, HighHeat sets in 1 hour and cures in 24 hours. HighHeat's cure time is accelerated by heat and can cure in 1 hour at 250°F..
  • CURE AND SET TIME: At room temperature, HighHeat sets in 1 hour and cures in 24 hours. HighHeat's cure time is accelerated by heat and can cure in 1 hour at 250°F..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld HighHeat is a two-part epoxy system that provides strong, lasting, heat-resistant repairs up to 550°F. Mixed at a ratio of 1:1, it forms a permanent bond that has a 4730 PSI strength and is chemical and fuel resistant..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
Check Stock

J-B Weld 8258 KwikWood Wood Repair Epoxy Putty Stick-7 inch, Beige

  • J-B WELD KWIKWOOD: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild wood. J-B Weld KwikWood is designed for all wood household DIY repairs!.
Check Stock

Astro Pneumatic Tool 4526 Yellow 4\ Plastic Spreader, Box of 100,4 Inch

  • J-B Weld Steelstik: A Hand Mixable Two Part Epoxy Putty Stick That Is Steel Reinforced & Non-Rusting To Quickly Repair Or Rebuild Anything Made Of Metal! J-B Weld Steelstik Is Certified By The Nsf And Is Safe For Contact With Potable Water.
  • Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Steelstik Takes 5 Minutes To Set And Cures In 1 Hour. J-B Weld Steelstik Set And Cure Color Is Dark Grey.
  • Product Features And Strength: J-B Weld Steelstik Has Lap Shear Strength Of 900 Psi, Can Withstand Continuous Temperatures Up To 350F (176C ) And Intermittent Temperatures Of 450F (232C), And Is Chemical Resistant Against Petroleum, Hydraulic Fluids And Other Chemicals When Fully Cured. Steelstik Can Be Molded, Shaped, Sanded, Drilled And Tapped.
  • Surface Applications: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass And Plastic & Pvc.
Check Stock