Reviews Pe Tubing Fittings

Arlon Silicone Self Fusing Tapes Amalgamation Rubber Tapes for Emergency Pipe Fishing Rod Marine Underwater Wrapping Pack of 2

  • Pack of 2 Rolls With PE Bag Each | Black Color |Size 25.4MM Width 10 Feet Length 0.5MM Thickness |Rectangle Shape| PLEASE STRETCH 2 TO 4 TIMES LENGTH TO WRAP FOR BEST PERFORMANCE.
  • Material 100% Specially Formulated Silicone Rubber | Temperature -50 to 260 °C.
  • Versatile Application for vehicles & equipment for emergency hose repair | Seal leaky hoses, pipe, tubing. Waterproof electrical connections and terminals | Use as an emergency fan belt. Work even over wet, dirty or oily surfaces | Tourniquet or emergency wrap over bleeding injuries | permanent airtight, Watertight seal in seconds, repair & seal leaky hoses, pipes, tubing, lines, & fittings.
  • Resists moisture, oxygen, and ozone to assure continuous high insulation values. | Conforms smoothly when wrapped around complex forms. | Bonds to itself at room temperature within 24 hours. | Remains non-tacky to the touch and does not adhere to other surfaces, or substrates.| Insulates with single wrap, thereby reducing labor time and cost.| Dampens vibration and resists heat and mechanical shock as well as corona. | All tapes are protected by a special interleaved liner..
Check Stock

iMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System

  • 【Great Value】：Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
  • 【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
  • 【BARBED DESIGN】：Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
  • 【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
  • 【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..
Check Stock

Sharkbite 25031A Washing Machine Outlet Box with Water Hammer Arrestor, 1/2 inch x 3/4 inch MHT, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe

  • INSTALLS IN SECONDS: Washing machine outlet box requires no special tools, no soldering, no crimping, unions or glue to connect. Just push to create a watertight seal.
  • COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT pipe in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times.
Check Stock

Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter - Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4" FHT

  • ... Thickness. PLEASE MAKE SURE YOUR TUBING SPECIFICATIONS FALL WITHIN THESE RANGES FOR THE PROPER FIT. Compatible with many models of Rainbird, Orbit, Dig, Hunter and Toro tubing as well as generic 1/2″ blank drip irrigation tube or drip line. Large fitting ID means less flow restriction..
  • ZERO LEAKS. Power-Loc fittings don’t leak. Barb design ensures tubing will not slip out or blow off at high pressure and temperature. No slippage or leaking, even under high pressure..
  • REUSABLE & LONG LASTING. Unlike other types of fittings, these parts are reusable and may be removed and reinstalled for a long, versatile life. Simply loosen nut to remove tubing. Durable construction provides years of reliable use..
  • PATENTED LOCKING TECHNOLOGY. Power-Loc fittings are quickly revolutionizing irrigation fitting expectations worldwide. The patented locking technology works great under high pressures and around heavy foot traffic. A more rugged alternative to insert and compression fittings, these adaptors have a locking mechanism that is easily tightened after the drip line is pushed on..
Check Stock

Orbit 50021 In-Ground Blu-Lock Tubing System and Digital Hose Faucet Timer, 2-Zone Sprinkler Kit

  • EVERYTHING YOU NEED: Sprinkler System Kit contains digital timer, 12 high-efficiency sprinklers, Blu-Lock tubing and fittings, tubing cutter, and 200 lb. pressure gauge.
  • FAST AND EASY INSTALLATION: Blu-Lock has reduced required insertion force by half of traditional barb fittings, making installations faster and easier on your hands.
  • WATER MULTIPLE AREAS: The digital timer waters up to two watering areas.
  • FAST AND EASY INSTALLATION: Blu-Lock has reduced required insertion force by half of traditional barb fittings, making installation faster and easier on your hands.
  • ENVIRONMENTALLY FRIENDLY: Blu-Lock requires no glue or plumbers tape, protecting the environment from harmful chemicals used with traditional PVC fittings.
  • CONSERVE WATER: The digital timer features rain delay so you arent watering in the rain.
  • FLEXIBLE PROGRAMMING: A run time of 1-240 minutes, with intervals from every 6 hours to once every 7 days.
  • PUSH-ON QUICK RELEASE FITTINGS: Blu-Lock tubing system is the easiest install with push-on fittings and quick release collars for easy removal. The stronger the water pressure, the more the retaining rings grip the pipe.
  • PART OR FULL CIRCLE: Simple to adjust from 40 to 360 degrees while the water is on or off.
  • AREA COVERAGE: Ideal for medium to medium....
Check Stock

Wostore Flaring Swage Tool Kit for Copper Plastic Aluminum Pipe With Tubing Cutter & Ratchet Wrench

  • 【ALL IN ONE KIT】：The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings, 1 tubing cutter, 1 ratchet wrench and 1 storage case..
  • 【EXTENSIVE RANGE OF FLARE ADAPTERS】：Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D. tubing..
  • 【COMMON SWAGE FITTINGS】:Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring....
  • 【PRACTICAL TOOLS】:Tube cutter:1/8"-1-1/8" (3-28MM) Pipe, Ratchet wrench:3/16",1/4",5/16",3/8" for square valves, such as valves on hose bibs and....
  • 【DURABILITY AND ACCURACY】:This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy....
Check Stock

Rain Bird ET256-50S Drip Irrigation Pressure Compensating 1/4\ Emitter Tubing, 6\ Emitter Spacing, 50 Roll, Brown

  • Works like soaker hose only better because it doesn’t clog and requires no maintenance.
  • Pressure-compensating emitters water plants evenly from beginning to end of tubing throughout the planting area.
  • Emitters feature two outlet holes, one on either side of tubing (180° apart).
  • Built-in 0.8 gallon per hour emitters spaced 6" apart.
  • Unique Micro-Porous construction creates an ultra-tight connection.
  • Attach to 1/2" Drip tubing with 1/4" barbed fittings.
  • Tubing specifications: outside diameter 0.25.
Check Stock

Orbit DripMaster 65199 Flag Dripper, 1-Gallon Per Hour, 10-Pack

  • SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing)..
  • PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur..
  • DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE..
  • ECO FRIENDLY: Provide water directly where you need it without any overspray!.
  • EASY TO INSTALL: Install emitters directly into the 1/2 main line or branch off with 1/4 inch tubing and connect fittings to the ends!.
Check Stock

Wostore Flaring Tool Kit for Copper Pipe HVAC

  • The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings and 1 storage case..
  • Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D.tubing..
  • Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring tool, swaging tool kit.
  • Versatile tool kit in a combination tubing flaring and swaging to fit all your needs..
  • This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy operation and precision. Plastic....
Check Stock