Reviews Pcie 1x Riser

Lian Li O11DMINI-1 Vertical GPU Bracket KIT /PCIE 4.0 / White -O11DMINI-1W-4

  • Vertical Graphics card holder for O11Dynamic XL with PCI-E 3.0 Riser Cable.
  • "NOT" Compatible with PCI-E 4.0​​ VGA Card.
  • 5 slots offer builders more installation options.
  • Included PCI-E Riser Cable , allows you to mount a PCI-E 16X Card..
  • In the condition of using the included riser cable (PCIE3.0) with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow steps to set up your BIOS to make it compatible..
Check Stock

2 Pieces PCI-e PCI Express 36Pin 1X Extension Cable Riser with Gold-Plated Connector (90 Degree 20 cm)

  • ...elp of this PCI Express 36Pin 1X extension cable, you can move it from the motherboard to the invisible part of the PC case, add an expansion card in the slot blocked by the CPU cooler, which can well hide your wireless module, holding a decorative and practical functions with a four-port SATA card.
  • Works well: this riser cable is reliable and serviceable, and you can bend the end of the port that goes into the motherboard 90 degrees without the connector breaking or losing continuity, which will give you a lot of convenience and it works well with no loss of quality.
  • Reliable and reusable to use: these pcie cable extensions are designed in quality cable material, soft and reliable, and easy for you to install in a 1U/2U case at any angle, experienced design and reliable materials for high frequencies and low attenuation, which will be a nice accessory for you.
Check Stock

Dracaena 6 Pack PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X (6pin/ MOLEX/SATA Powered) LED Status Riser Adapter + 60cm USB 3.0 Cable (GPU Ethereum Mining)

  • Upgraded Version: The Dracaena PCIE Riser is a high-performance PCI Express riser that can convert a PCIE X1 slot to a PCIE X16 slot on the mother board. With more PCIE X16 graphic cards, it will give a safe and dependable connection. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs..
  • Stable solution: The 60cm USB 3.0 extension cable is soft and flexible, making it simple to position and route. The operating state is shown by three LED lights. The slot has a fixed buckle that makes it easy to remove and replace the graphics card without it falling out..
  • Simple extend PCI Express X1 slot from mother board to PCI Express X16 slot for heavy GPUs. Added fixed buckle on the PCI Express X16 slot ensure stable GPU connection..
  • Power Supply Options: While other PCIE has only 1 option for power connector which is 6 pin power connector. Dracaena Riser provides 3 different options which are 6pin, Molex and SATA.
  • 3 Solid Capacitors improve power stability to GPU and prevent interference. Coil unit added for absorbing electromagnetic wave.
Check Stock

PCIe Splitter 1 to 4 Multiplier Riser Card, PCI Express X1 Expansion Risers Card, PCIE USB 3.0 Ports Adapter Card for Ethereum Bitcoin ETH GPU Mining Miner Rig

  • ✨ 【Excellent Extendability】 Our PCIe expansion riser card is mainly to solve the problem of less interface on the motherboard, 1 port can be extended to 4. The bus interface is PCI-E X 1 that compatible with X4, X8, X16 interface graphics card ..
  • ✨【Higher Stability】 ---Driver-free Design. The PCIe1 to 4 Multiplier Risers card's main control board adopts the direct power supply mode of the PCI Express interface, no more need the external power. (The motherboard must be powered off before installation).
  • ✨【Advanced Heat Dissipation 】 Motherboard IC which based on high-quality ASM1184 chipset to solve the heat dissipation problem. With aluminum alloy heat sink can effectively dissipate excess heat. Provide the stability and durability of riser card..
  • ✨ 【Port Quantity 】 The Pcie splitter 1 to 4 can make sure multiple lines work at the same time. Easy to install. (Note: This pcie splitter 1 to 4 pci riser card cannot be connected to USB devices, since the 4 USB ports transfer PCI-E signals, not USB signals.).
  • ✨【Warranty】--30-day money-back guarantee service for new product. If you have any questions about pcie splitter risers card, please feel free to contact us, we will definitely solve your problem within 12 hours..
Check Stock

LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX3090 RX6900XT x570 Z690 Tested] Shielded Gaming PCI Express Gen4 Reverse PCIE Connector w/ 270 Degree Socket {24cm} Compatible with NZXT H1 Without Screw

  • .... No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets. (Compatible with NZXT H1).
  • Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount.
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity.
  • Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases..
Check Stock

LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX3090 RX6900XT x570 B550 Z690 Tested] Shielded Extreme High-Speed Vertical Mount Gaming PCI Express Gen4┃Universal 90 Degree Socket{20cm} 3.0 Gen3 Compatible

  • Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets..
  • Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount..
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity..
  • Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases..
Check Stock

Sintech Laptop Expresscard 34 to Mini PCI-e Or PCIe X1 Adapter Card

  • allowed to use your existing Mini PCIe or PCIe 1X Card in the ExpressCard Standard slot,such as wireless mini pcie card.
  • NOTE:it can't work for mini PCIe SATA or mSATA SSD. For PCIe 1X card, pls add extra molex power supply..
Check Stock

FebSmart 1X 19Pin USB 3.0 Header and 2X USB-A Ports PCIE USB 3.0 Card for Windows Server, XP, Vista, 7, 8, 8.1, 10 PCs-Build in Self-Powered Technology-No Need Additional Power Supply (FS-HA-Pro)

  • ...5.WARNING:1. Please install driver for USB card on Windows 7 and previous version systems.2. Make sure PCs mother board have empty PCIe slot for PCIE USB cards.3. Make sure USB device is USB 3.0 or can't get USB 3.0 speed.4. All USB ports share 5Gbps bandwidth.5. This is not the PCIE bridge card, do not support GPU riser..
Check Stock

IIAzimps PCI-E Riser Card 010S 8 Solid Capacitors GPU Risers Adapter Card PCI-Express 1X to 16X Riser Card for Bitcoin Ethereum Mining BTC ETH Miner Rig (3 Pcs Pack)

  • Upgraded Version: The 010S PCI-E risers card is the newer upgraded version of the GPU risers 009S, expand the motherboard PCIE 1X to PCIE 16X slot, use gold plated contacts to ensure flawless connectivity and long life. Mainly designed for Bitcoin Ethereum Crypto Mining rigs and other GPU mining equipment..
  • More Stable and Secure: The graphics card power supply adopts 8 solid capacitors to ensure the graphics card mining stably and secure..
  • Multi-interface Design: 4PIN+6PIN interface design, With SATA 15pin Male to 4pin/6pin power cable, makes the graphics card power independent of the motherboard to reduce the burden on the motherboard when connecting multiple graphics cards..
  • Thoughtful Design: The PCI-E USB 3.0 cable uses multi-layer shielded wire, which can be connected to a maximum of 3M without attenuating the signal. 6 marquee LED lights display working status. The graphics card slot is metal shielded to prevent interference and with a fastening buckle, which provide a firmly connect..
  • Wide Compatibility: This GPU riser kit is compatible with 1x, 4x, 8x, 16x PCI-E slot of th....
Check Stock