Reviews Pci Io Board

Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4 (CM4), Notched for Antenna

  • Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4：Dedicated aluminum heatsink, corrosion / oxidation resisting, better heat dissipation.
  • For CM4 & based board：matching with the CM4 on size and mounting holes, fast heat dissipation.
  • Notched for antenna section：no hindrance to the antenna.
  • Using with base board: for Official Compute Module 4 IO Board or Waveshare Compute Module 4 PoE Board.
  • Note: Only HEATSINK,not include base board.
Check Stock

HiLetgo 5pcs Nano IO Shield DIY Nano IO Expansion Board DIY Kits for Arduino Nano

  • Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
  • New Expansion Board Terminal Adapter DIY Kits for Arduino NANO IO Shield V1.0.
  • Leads all pins out, convenient for wiring and doing experiments.
  • IO Expansion Shield For Arduino Nano is specifically designed to facilitate.
  • In essence, it expands for Arduino Nano controller to link those devices in a simple and trouble free manner..
Check Stock

PCIe 1 to 4 Riser Card, Pcie Splitter 1 to 4 PCI Riser Card, 4 Risers into 1 PCI Card, PCIe Multiplier Risers 1X to External 4 PCI-e USB3.0 Adapter for ETH Miner GPU Crypto Bitcoin Ethereum Mining Rig

  • NOTE: The motherboard must be powered off before installation. GREAT EXTENDABILITY-Plugs directly to the board without any extender cable, can be fixed to the case. (compatible with X4, X8, X16 slot).
  • HIGH EFFICIENCY - This pci-express card has reduced the number of adapter and transfer line, one line directly to the interface, effectively reduce the interface interference and wire loss, to ensure data reliability, so as to improve work efficiency!.
  • HIGH STABILITY - The main control panel of this PCI expansion card uses PCI-E interface direct power supply mode, and no external power line is needed, so that the main board power is free from external interference, and the stability is higher!.
  • COMPATIBILITY - PCI-E 1 to 4 Riser Card, Supported OS: HiveOS, DOS, Linux, Windows XP/7/8/10..
  • PORT QUANTITY - 4 X PCI-E USB, Only one cable to the slot, easy and convenient to settle and install.With IC heat radiator..
  • 严正警告贵司：恪守文明，公平竞争，友善经营。否则我方将采取一切必要措施予以还击。.
Check Stock

Acogedor 2.8 Inch TFT SPI Serial Port LCD Touch Panel Module ILI9341 240x320 5V/3.3V (without touch)

  • ?2.8 inch color screen, support 65K color display, and the display is colorful.
  • ?With PCB board (including power supply IC, touch IC, SD cardcage) compatible 5110 interface.
  • ?At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch).
  • ?This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution.
  • ?The module is equipped with voltage stabilized IC to support 3.2v /5V power supply.
Check Stock

Dracaena 6 Pack PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X (6pin/ MOLEX/SATA Powered) LED Status Riser Adapter + 60cm USB 3.0 Cable (GPU Ethereum Mining)

  • Upgraded Version: The Dracaena PCIE Riser is a high-performance PCI Express riser that can convert a PCIE X1 slot to a PCIE X16 slot on the mother board. With more PCIE X16 graphic cards, it will give a safe and dependable connection. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs..
  • Stable solution: The 60cm USB 3.0 extension cable is soft and flexible, making it simple to position and route. The operating state is shown by three LED lights. The slot has a fixed buckle that makes it easy to remove and replace the graphics card without it falling out..
  • Simple extend PCI Express X1 slot from mother board to PCI Express X16 slot for heavy GPUs. Added fixed buckle on the PCI Express X16 slot ensure stable GPU connection..
  • Power Supply Options: While other PCIE has only 1 option for power connector which is 6 pin power connector. Dracaena Riser provides 3 different options which are 6pin, Molex and SATA.
  • 3 Solid Capacitors improve power stability to GPU and prevent interference. Coil unit added for absorbing electromagnetic wave.
Check Stock

LCD Display Module - 2.8 Inch TFT SPI Serial Port LCD Touch Panel Module ILI9341 240x320 5V/3.3V(带触摸最少9个IO驱动)

  • With PCB board (including power supply IC, touch IC, SD cardcage) compatible 5110 interface.
  • At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch).
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution.
  • The module is equipped with voltage stabilized IC to support 3.2v /5V power supply.
  • 2.8 inch color screen, support 65K color display, and the display is colorful.
Check Stock

ELUTENG PCIE 1 to 4 Ports PCI Express 16X Slots Riser Card USB 3.0 PCI-E Adapter Board Multiplier Port GPU Extender Miner Riser Card for BTC Bitcoin Miner Mining

  • 【PCI-E 1 to 4 Riser Card】The bus interface is PCI-E X1, and compatible with X4, X8, X16 graphics interface, 1 interface can be expanded to 4 USB3.0 ports, which effectively solves the problem that the lack of PCIe interface on the motherboard. NOTE: The adapter card cannot be connected to USB devices, since the 4 USB ports transfer PCI-E signals, not USB signals..
  • 【Ultra-Large Aluminum Heatsink】The ultra-large imported aluminum alloy heatsink can effectively dissipate excess heat, so that the adapter card is always at a normal temperature, and the operation is more stable..
  • 【Plug-in Design】The PCI-E riser card adopts a plug-in design, which is directly connected to the motherboard interface for power supply. It can be fixed on the chassis without an extension cable, reducing the number of adapters and patch cords, effectively reducing interface interference and line loss, and ensuring data reliability and stability, improve work efficiency..
  • 【Strong Stability】The main control board adopts the PCI-E interface for direct power supply, without an external power cord, so that the main control board is not interfered by the outside world. 4 USB 3.0 ports can work at the same time, backward compatible with USB 2.0 and USB 1.0, the stability is....
Check Stock

FebSmart PCI-E Riser for Bitcoin Litecoin ETH Coin Mining 6 PIN Powered PCIE Extension Cable GPU Riser Ethereum Mining ETH GPU Extension Cable PCIEX1 to PCIE X16 VER006C GPU Riser(Blue 6-PCS)

  • 1.Feb Smart VER006C high performance PCI Express riser can extend the mother board PCIE X1 slot to PCIE X16 slot. Will provide a safe and reliable connectivity with more PCIE X16 graphic cards. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs..
  • 2. Designed 3X high performance solid capacitors,1X voltage transformer and 1X Inductance to make sure voltage and current supply stable. Build in electric circuit protector keep device away from over current, over heat and over voltage..
  • 3. Packed 23.6-inch USB 3.0 extension cable for flexible Graphic card connectivity. Equipped 15Pin SATA to Molex 6Pin power cable provide adequate current for miner rigs GPUs..
  • 4. Simple extend PCI Express X1 slot from mother board to PCI Express X16 slot for heavy GPUs. Added fixed buckle on the PCI Express X16 slot ensure stable GPU connection..
  • 5. Excellent choice for mining rigs. Buy with 30 days warranty. WARNNING:If the PCIE X1 Connector Inserted Reversely, May Damage the Connected GPUs or PCIE Slots..
Check Stock

PCI-E Riser for Bitcoin-Litecoin-ETH Coin, PCIE VER 006C 6 Pin 16x to 1x Powered Riser Adapter Card, 50cm USB 3.0 Extension Cable to MOLEX SATA Power Cable GPU Riser Adapter Ethereum Mining ETH (6PCS)

  • 【Compatibility】 The version of this item is VER 006C riser kits are the perfect solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners..
  • 【Quality】 4 High Quality Solid Capacitors (330 16V not 220/270 16V) for more reliable and safe power delivery，Gold plated contacts for flawless connectivity and a long lifespan..
  • 【Safety】With SATA 15pin Male to MOLEX 6pin power cable for direct connection to your power supply reduces the power burden on your motherboard and ensures maximum compatibility with your power supply.
  • 【Convenience】Fixable board with 4 holes available on PCI-E 16X side to fix PCI-E 16X connector to motherboard for more convenient management for graphics card.
  • 【What You Get And Shipping】6x PCI-E 16X riser board, 6x PCI-E 1X adapter card ,6x 50cm USB 3.0 riser cable, 6x 6-pin MOLEX to 15-pin SATA power cable. SHIPPED FROM THE U.S. Delivery time takes about 2-5 bussiness days.
Check Stock