Reviews Pcb Mount Terminal Block

UNO Screw Terminal Block Breakout Module with Aluminum Enclosure for UNO R3.

  • UNO Screw Terminal Block Breakout Module with Aluminum Enclosure. With the adapter module you can easily extend UNO projects to industrial control....
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. Standard IDC40 pitch....
  • Support for Desktop, Panel mount, Wall-mount or DIN rail mount. DIN rail mount supports vertical or horizontal place mounting. Can support width 35mm....
  • Enclosure: High quality aluminum enclosure, thickness 1.5mm/0.06", with attractive and extremely durable powder coat painting and clear laser marking....
  • Packing list: 1x Terminal Block Board(assembled standoffs and screws), 1x Aluminum enclosure(top and bottom covers), 5x M3x4mm Flat head screws(for....
Check Stock

Electronics-Salon Screw Terminal Block Breakout Module, for Arduino MEGA-2560 R3.

  • Terminal Block Breakout Module - for Arduino MEGA-2560 R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header..
  • FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Mega module.
Check Stock

CZH-LABS DIN Rail Mount 8 Amp Solid State Relay SSR Module in 4~32VDC Out 100~240VAC 8 Channels

  • MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated)..
  • Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode..
  • Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 8 Amp, maximum on-state current 12 Amp (< 10 seconds). Isolation: Phototriac. Zero cross: Yes..
  • Terminal Block: Wire range: 24 ~ 12 AWG / 2.5mm square. Strip length: 7mm. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass..
  • DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass PCB, dual copper layers..
Check Stock

Screw Terminal Block Breakout Shield Module for Arduino UNO R3

  • Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Uno module..
Check Stock

SamIdea 10Pieces 2-12 Pole 2.54mm/0.1\ Plug Type Pitch PCB Mount Screw Terminal Blocks Assorted Kit, AC 150V 8A(IEC)/6A(UL)

  • ★★★★★ PRODUCT NAME: 2-12 Pole PCB Terminal Block strips Kits (PCB board in the main image is not included).
  • ★★★★★ SPECIFICATIONS: Rated Value: AC 150V 8A(IEC)/6A(UL).
  • Poles : 2-12 P(11P not included),Weight:Approx. 106g.
  • ★★★★★ Terminal Distance : 2.54mm/0.1".
  • ★★★★★ SIZE: Pin Distance : 2.54mm/0.1".
  • 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 12 poles, each 1 Piece.
  • ★★★★★ 100% satisfaction guarantee.
  • SamIdea is a Registered Trademark, can not sold without authorization..
Check Stock

CZH-LABS RPi Screw Terminal Block Breakout Module with Aluminum Enclosure for Raspberry Pi 1 2 3 Model B/B+

  • RPi Screw Terminal Block Breakout Module with Aluminum Enclosure. With the adapter module you can easily extend Raspberry-Pi projects to industrial....
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. Standard IDC40 pitch....
  • Support for Desktop, Panel mount, Wall-mount or DIN rail mount. DIN rail mount supports vertical or horizontal place mounting. Can support width 35mm....
  • Enclosure: High quality aluminum enclosure, thickness 1.5mm/0.06", with attractive and extremely durable powder coat painting and clear laser marking....
  • Packing list: 1x Terminal Block Board, 1x Aluminum enclosure(top and bottom covers), 2x DIN rail adapter Bracket, 4x Brass standoff, 5x M3x4mm Flat....
Check Stock

OONO 16 Amp 2x12 Position Terminal Block Distribution Module for AC DC

  • 16Amp 48V 2x12 position screw terminal block distribution module. Support for multiple module extension connections..
  • Rated current 16 Amp(total input or output), Maximum voltage 48V.
  • A / B terminal blocks, Pitch 7.5mm/0.295", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn....
  • A1~B6 / A7~B12 terminal blocks, Pitch 5.0mm/0.197", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel,....
  • UL CE CQC certified terminal blocks, FR-4 glass fiber PCB..
Check Stock

Ultra-Small RPi GPIO Terminal Block Breakout Board Module, for Raspberry Pi

  • The item has been soldered and assembled. Support for Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero-W..
  • Terminal block pitch 2.54mm/0.1", wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper..
  • FR-4 fiber glass PCB, dual copper layers..
  • 2x20 positions header connect to Raspberry Pi board..
  • Packing list: 1x terminal block breakout module, 4x M2.5x6mm screws, 4x 10mm nylon standoffs. 2x 11.5mm brass standoffs, 1x small slotted screwdriver (NOTE: the item not include Raspberry Pi Board)..
Check Stock

risingsaplings RSP pi pico io Breakout Board 2.54mm Male Female or 3.81mm Terminal for Raspberry pi pico (3.81 Terminal (1pcs))

  • The item has been soldered and assembled, support for Raspberry Pi Pico..
  • The terminal block label can clearly identify the position of the functional pins..
  • FR-4 fiber glass PCB, dual copper layers. 2x20 positions header connect to Raspberry Pi board..
Check Stock