Reviews Pcb Cutting Equipment

Portico II Master Buss Converter

  • [EASY ADJUSTMENT] PT2399 + NE5532 continuously adjustable reverb and volume, with high performance and low noise..
  • [OUTPUT INTERFACE] With 2 microphone outputs, mixed output and music signal output, with less interference..
  • [EXCELLENT PCB] Using 1.6mm thick double sided PCB, spray tin process, ensure the good passage of large and small currents..
  • [APPLICABLE DEVICE] Support mobile coils and computer electret microphones and most wireless microphones..
  • [WIDE VOLTAGE RANGE] With DC12‑24V wide voltage range, suitable for more audio equipment, has strong practicability..
Check Stock

Cermant 3-Pin 5.08mm Pitch Male Female Plug-in PCB Screw Terminal Block Connector (5.08mm-3P-20Set)

  • Pin Number : 3 Pin Distance : 5.08mm/0.2"..
  • These PCB screws are snap together well.have a quick release capability.Just need to loosen the screws to land the wires.Use high-quality plastic PA66 high temperature resistant V0 flame retardant,steel screw environmentally friendly electroplating,no slippage.Widely used in electronics,communication equipment,instruments.
  • Package Content: 20 Set x PCB Terminal Block Connector.
Check Stock

Jienk 5Pcs 6-Pin 300V 10A 5.08mm Pitch PCB Mount Screw Terminal Block Connector for 28-12AWG Cable

  • 【Product Name】 6 Pin, Plug-In 5.08mm/0.2" PCB Terminal Block.
  • 【Rated Voltage】300V, Rated Current：10A.
  • 【Easy to Use】No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver..
  • 【Application】: PCB terminal is widely used in electronic equipment, such as small electronic watches, calculates, general computer, communication electronics equipment automatic control system, domestic appliance and warning devices, etc..
Check Stock

Professional welding tools and desoldering tool sets (12 pieces), desoldering pumps, desoldering wicks, wire cutters, tweezers, welding wire, soldering iron auxiliary accessories

  • Tool Kit：Suitable for electronic repair and DIY, any circuit board with small parts, such as mobile phone motherboards, cables, TVs, VCRs, radios, headphones, stereos, motors, toys and other electronic equipment. Correct the error of the small board on the PCB..
  • Tool Kit：includes 6 welding aids and desoldering pump, desoldering core, Wire cutters, anti-static ESD tweezers, 0.8mm solder wire.
  • Welding auxiliary tools: widely used in electronic repair, soldering, desoldering, etc. Can use cutting, scraping, hooks, brushes and other welding work requirements. Cutting pliers: Made of high-quality steel, it can accurately cut flexible cords within 1mm. Anti-static ESD tweezers: Made of high-quality stainless steel, anti-static, non-sticky..
  • Desoldering pump: very sturdy, can remove excess solder on the circuit board, easy to operate with one hand, desoldering core:width 2.5mm / 0.098 in,length 1.5m / 59 in length, made of pure oxygen-free copper It has a strong ability to absorb tin. No cleaning is required and less residue. Solder wire: 0.35 ounces / 10 g.
  • Tool Kit: Contains 12 necessary welding tools to save you multiple purchases..
Check Stock

HQMaster Combination Kit Set Router Bits Cutter Cutting Milling Tool (4 Type, Each 10Pcs) Including Flat/Ball Bits, 10 V-Shape Engraving Bits

  • Cost-effective bits: package include 4 type bits each 10pcs assorted in 4 storage cases meet most standard milling applications).
  • Perfect cutting: The design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal. made of quality ultral fine tungsten carbide material.
  • Excellent cutting results and enhanced productivity.
  • Wide Compatibility: compatible with most desktop or industrial CNC machines. Used for carving, engraving, milling, dadoing, boring, routing, slotting in materials like density board, wood, acrylic, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
  • Used for PCB, SMT, the CNC, mold, plastic, thin copper/aluminum/stainless steel and other precision metal parts processing.
  • High efficiency: These bits own sharp edge which is able for fast engraving that makes high efficiency.
  • Fast chip-removal speed leaves an unobstructed path for the end mill.
  • Well made & Excenllent Performace: Mirror polishing and space of Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
Check Stock

Pieces 4 Pin LED Light Strip Connectors Set Including Screw Fixing Clips, 4 Pin LED Connectors, Cuttable T, L and X Shape PCB Board for SMD 5050 RGB LED Strip Lights Gapless Solderless Connector

  • ...voltage, the heat resistance level is -20℃ - 100℃, so they are suitable for most non-waterproof 4 pin SMD 5050 RGB lights in 0.39 inch/ 10 mm width.
  • Note: you should pay attention to use them correctly for ensuring safety and extending service life.
  • Cuttable PCB board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips.
  • Just use your imagination to DIY a special light strip.
  • Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board.
  • Simple to install: the LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector + - polarity in line with + of strip before you connect it.
  • Wide range of usages: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
  • Sufficient quantity: the package comes with 40 pieces 4 pin LED connectors, 15 pieces L-shaped PCB boards, 15 pieces T-shaped PCB boards, 5 pieces X....
Check Stock

SCULPFUN S10 Laser Module with Air Assist Nozzle, 10W Optical Power, 20mm Wood 15mm Acrylic Cutting, Faster & Stronger Laser Cutter, Ultra-Fine Compressed Spot, Compatible with Laser Engraving Machine

  • ...le is different because it has an advanced hydrodynamic design that allows for better utilize of air pressure. S10 has a faster jet stream when using the same air assist. For example, when using a 30L/min, 0.03Mpa air assist, the S10 nozzle will eject a high speed airflow of up to 14.5m/s. This will greatly improve cutting penetration and cutting efficiency. (AIR ASSIST NOT INCLUDED, NEED TO BUY SEPARATELY).
  • Faster, Stronger and Cleaner: Combining advanced high-speed air assist and 10W high energy density laser, S10 embodies wood cutting performance comparable to industrial grade: First, cutting efficiency is greatly improved, cutting faster.
  • Second, cutting penetration is stronger, which can cut many high-density wood.
  • Third, cutting surface is cleaner, powerful airflow blows away the residue, leaving the surface of cut objects without any stain..
  • 0.06mm Ultra-Fine Compressed Spot: S10 adopts ultra-fine high energy 10W laser beam shaping technology, 0.06*0.06mm compressed spot enables finer laser engraving. S10 can cut 10mm wood, 5mm acrylic at one pass.
  • Cut 10mm walnut and 6mm MDF and other high density materials.
  • Carving metal, glass, stone, etc. Which means S10 has higher energy density, stronger cutting penetration and engraving capabilities..
Check Stock

Drill Press Machines Parts Feed Hub Wheel & 195mm Handle Bar Set

  • Type: Straight, Cutting Type: 2 Flutes, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 2/3" (17mm), Overall Length: 1-33/64" (38.5mm).
  • Double flute design cnc router Bits have a mirror polish and large chip space which produces smooth cutting and fast chip-removal..
  • Industrial quality control to ensure best performance with high precision,work perfect on milling or cutting machines, ensure high work efficiency..
  • Made of tungsten steel material with good milling, cutting performance, ensure high work efficiency, durable and high precision..
  • Great for carving, cutting, engraving, milling in materials like density board, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
Check Stock

Micro Drill Bits - 10Pcs 0.3mm to 1.2 mm Tungsten Carbide PCB Print Circuit Board Tip Rotary Tool Jewelry CNC Engraving Drill Bits Set for PCB Circuit Board, Dremel PCB Jewelry Making (0.3-1.2mm)

  • PREMIUM MATERIAL - These mini drill bits are made of tungsten steel,carbide tipped drill bits with high hardness,high wear resistance, resistance to bending, anti-impairment.Replacements for your CNC machines and any Handheld tools..
  • MEET YOUR NEED - Cutting edge diameter of these PCB Drill Bit Set: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm..
  • SHARP EDGE - End Mill Sets can milling groove and clean surface,a large scraps discharge space,little resistance and smoothly during the scraps discharge.These sets of tool can work quickly and cleanly..
  • IMPROVE ACCURACY - The end milling engraving bits with shape cutting edge,reduce cutting force and prevent drill broken,improve the drilling accuracy.Attention: Don't use on too hard material,like high hardness iron..
  • WIDE APPLICATION - The PCB drill bit sets are great for punching at printed circuit boards,cutting and engraving and worked on Acrylic, PVC, Nylon, Resin, Fiberglass,etc..
Check Stock