Reviews Pan Head Tapping Screws

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • ...rface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

(780 PCS) #4#6#8#10 Pan Head Sheet Metal Screws Assortments 304 Stainless Steel 18-8 Self Tapping Screws Hardware Kit

  • Package includes #4 #6 #8 #10 thread size, 780 PCS in total Pan Head Sheet Metal Screws or Self Tapping Screws.
  • 18 Kinds of most commonly used Screws lengths combinations to meet all your daily needs. A must hardware kit in you home life..
  • Stored in a durable and sturdy plastic box, packaged well. Please refer to the picture and you will find the exact sizes and locations for you needs..
  • Usage: Wood, Metal and other tough materials. Included a free No.2 phillips screwdriver..
  • HIGH QUALITY MATERIAL: 100% Stainless steel 304(18-8) provides good strength and corrosion resistance in bad environments..
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • ...rface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • ...rface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

300 PCS Pan Head Phillips Drive Sheet Metal Screws Assortment Kit with Size #6, 8, 10, 12, 14, Bright Finish, 304 Stainless Steel 18-8

  • Package includes #6 #8 #10 thread size, 300 PCS in total Pan Head Sheet Metal Screws or Self Tapping Screws.
  • 12 Kinds of most commonly used Screws lengths combinations to meet all your daily needs. A must hardware kit in you home life..
  • Stored in a durable and sturdy plastic box, packaged well. Please refer to the picture and you will find the exact sizes and locations for you needs..
  • Usage: Wood, Metal and other tough materials. Included a free No.2 phillips screwdriver..
  • HIGH QUALITY MATERIAL: 100% Stainless steel 304(18-8) provides good strength and corrosion resistance in bad environments..
Check Stock

Door Armor Mini - Door Security Reinforcement Kit for Jamb Frame Strike Plate - DIY Home Security – Bronze

  • THE ORIGINAL ULTIMATE DOOR SECURITY KIT: All Door Armor Single Door security devices kits come complete with 1 Door Armor Jamb Shield, 2 Door Shields, and two sizes 21 self-tapping screws.
  • MINI DOOR SHIELDS ARE ANTI DOOR KICK IN: MINI Door Shields slide on the edge of the door and take less than 5 minutes to install.
  • Require 2 quarters of space between the door and frame for proper installation.
  • THE DOOR ARMOR JAMB SHIELD IS 46" LONG: The Door Jamb can be protected with this shield, it is cut with knock-out holes that are designed to fit locks spaced from 4.5" to 21.5" apart, (1) is Included in every Door Armor door lock reinforcement Kit.
  • TORX HEAD SCREWS: Every mini hardware kit includes 17 3-1/2-Inch painted Torx head screws, with self tapping tips and 4 2-1/2-inch painted Torx head screws, with self tapping tips.
  • REPAIR DAMAGE FROM AN EXISTING KICK-IN: Door Armor can also be used to repair previous damage. Increase your house and apartment security working on your front door security with our great door protector security kit.
Check Stock

Hilitchi 240 Pcs #8 304 Stainless Steel Phillips Truss Head Self Tapping Sheet Metal Screws Assortment Kit Set

  • ♛ Made of 304 Stainless Steel, stainless steel is superior to regular steel and provides excellent rust resistance in water applications, Suitable for indoor and outdoor use.
  • ♛ Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material..
  • ♛ Package Quantity: 240-Piece. All of screws will be packed in a sturdy plastic box, can be use for a storage box.
Check Stock

Glarks 120Pcs #8 x 5/8\ Phillips Modified Truss Head Wood Screws, Black Zinc Plated Carbon Steel Self Tapping Sheet Metal Screws Set

  • ♛【Package Includes】: You'll receive 120pcs #8 x 5/8" modified truss head wood screws in total. Sufficient quantities are enough for your different daily use at home and office..
  • ♛【High Quality Material】: Our truss head self tapping wood screws are made of high quality carbon steel, black zinc plating gives screws higher corrosion resistance and rust resistance for long service life, not easy to break or deform, and can fit different indoor and outdoor environments..
  • ♛【Sharp Tip Design】: This phillips truss head self tapping screw with sharp tip and deep thread can easily penetrate a variety of materials and achieve tight connecting, which provides better holding power to get the job done easily..
  • ♛【Easy to Use】: No need to pre-drill or drill hole, simply use self-tapping screw to rotate into the product without using nut to cooperate. It can reach a remarkable effect of connecting and fastening..
  • ♛【Wide Application】: These screws can be applied to plastic, wood and soft materials, suitable for repairing fasteners in shops, garages or household furniture. Mainly used in manufacturing, construction, engineering, machinery and other industries..
Check Stock

NINDEJIN M3.5 Self Tapping Screws Assortment Kit 304 Stainless Steel Wood Screws Flat Head Phillips Drive Screws Set with 240Pcs Tapping Screw 12-40mm and 2Pcs Cross-Head Batch

  • High Quality: 304 Stainless Steel Flat Head Self Tapping Screw Phillips Cross Metal Hardware Assortment Kit Set with Cross-head Batch.
  • Multiple Choices: 242pcs M3.5 wood screws assortment kit. Includes 12mm/0.47'' 14mm/0.55'' 16mm/0.63'' 20mm/0.79'' 25mm/0.98'' 30mm/1.18'' 35mm/1.38'' 40mm/1.58'' length screws and 2 piece Phillips head batch. Kinds of sizes for your choice..
  • Material: These self-tapping screws are made of 304 stainless steel. Stainless steel with superior rust resistance ensures long-lasting results, corrosion resistance,anti-aging and good toughness.
  • Easy to Store: Each size is individually packed in a small bag and all screws are packed in a clear dividing box. The fully transparent box simplifies the selection and storage of the product and is labeled with the corresponding size chart for ease of use..
  • Wide Application: NINDEJIN Self-Tapping Screws Assortment is mainly used in metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material. Widely used in electrical products, communication equipment, furniture, other maintenance work, DIY arts and craft and much more..
Check Stock