Reviews Oxygen Cylinder Wrenches

Metal Oxygen Cylinder Wheelchair holder for D/E Cylinders

  • Versatile design fits most wheelchairs and holds D or E size oxygen cylinders. (does not fit Drive silver sport 2 models).
  • Holds D or E oxygen cylinders (note: does not include cylinder or wheelchair, holder only).
  • Made of steel with durable powder coat silver paint finish - - not chrome.
Check Stock

New 60 cu ft Steel Oxygen Cylinder with CGA540 Valve

  • New, high-quality 60 cu ft steel oxygen cylinder with CGA540 valve.
  • Thick walled steel tank, with the durability to stand up to any work site.
  • 7″ diameter x 22.5″ in height with valve - approximately.
  • All cylinder ship empty. Please consult your local compressed gas supplier for filling needs..
Check Stock

99.999% by Volume Nitrogen Calibration Gas, 17 Liter Steel Cylinder.

  • WIDE RANGE OF COMPATIBILITY: Most calibration accessories are designed for use with more than one instrument. Calibration cylinders are also conveniently compatible for use with the GALAXY GX2 Test System so they fit easily with other components and ensure a comprehensive safety evaluation.
  • MULTI-GAS TANK: The calibration gases within the cylinder are 1.45 % CH4 (Methane), 15% O2 (Oxygen), 60 PPM CO (Carbon Monoxide), 20 PPM H2S (Hydrogen Sulfide).
  • RECYCLABLE CYLINDER: MSA promotes recycling of Model R, Model RP, and Econo-Cal Calibration Cylinders. The calibration gas recycling program benefits a non-profit organization where cylinders are not refilled.
  • they are salvaged for scrap. Simple recycling instructions are included with every eligible cylinder..
  • RFID-TAGGED FOR EASY TRACKING: RFID technology and software offer convenient setup, recordkeeping, automatic calibration cylinder recognition, cylinder pressure, expiration warnings, and status of multiple cylinders simultaneously.
  • SAFETY & COMPLIANCE: All MSA calibration gas is supplied with individual Certificate of Analysis to NIST-traceable standard and MSDS. Cylinders, testing systems, and detectors also meet all applicable OSHA regulations and follow relevant safety standards in markets they ....
Check Stock

6 Cylinder Metal Rack for D/E / M9 Oxygen Cylinders (Rack Only)

  • Oxygen cylinder patient rack (note: rack only, tanks not included).
  • Holds 6 D/E/M9 size oxygen cylinders (note: does not include cylinders).
  • Durable silver powder coat paint finish resists chipping & scratching - - not chrome.
  • No assembly required - ready to go from carton.
Check Stock

Yescom DOT Portable Weld Torch Tank Kit Twin Tote Oxygen Acetylene Oxy Cutting Brazing Welding Goggles

  • [Multifunctional]: This Portable Welding Oxygen/Acetylene Torch Kit comes with oxygen/acetylene regulators, tanks and a brass torch, ideal for steel welding, brazing, cutting, bending and forming in light duty industrial settings such as automobile repairing.
  • [Portable Design]: Comes in a convenient, all-in-one portable design for easy storage and transportation, including a handy suitcase with an ergonomic and firm handle for easy carrying.
  • [Safety First]: Comes with DOT certification for the gas cylinder, which is made of sturdy and seamless steel in order to avoid heat inflation, ensuring safe usage at all times. Includes square goggles to protect the eyes and expand your field of vision while in use.
  • [Durable]: Comes with ST14 steel gas cylinder, copper welding rod, tough brass torch handle for enhanced durability and a long service life.
  • [Wide Application]: Perfect for industrial or artistic use by automobile repairmen, air conditioner repairmen, maintenance personnel, home artists, etc. for automotive, air conditioning and refrigerator repair or artistic metal sculpting.
Check Stock

Gowe Oxygen Bomb Calorimeter, Heat Capacity: 14400 J/K～14500 J/K

  • The heat capacity of the instrument is 14400 J/K～14500 J/K, and it is suitable to determine calorific value of combustible materials such as petroleum products without water (gasoline, jet fuels, diesel oil and fuel oils, etc.), coal, coke and paraffin, etc..
  • 1. This instrument adopts sealed oxygen bomb. The whole structure adopts stainless steel material. The strength is enough to resist the max pressure (60~70 atmospheric pressure) when the solid burning. And it can resist the bigger pressure when liquid fuel burning..
  • 2. The inner water cylinder is composed of stainless steel sheet.The cross section is pyriform and the capacity is 3kg. The water cylinder is equipped with electric stirrer inside. It ensures the temperature in the water cylinder uniform..
  • 3. The external water jacket is double layer container. It filled with water when doing determination.It make the water temperature in the cylinder uniform by water jacket stirrer and form the constant temperature environment meeting the requirements of test..
Check Stock

7PCS Oxygen Sensor Socket 22mm (7/8 in), 27mm, 29mm fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool (Red, 7PCS)

  • 【High Qulity】Made of high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust and corrosion..
  • 【Size】 7mm slot, 7/8” (22mm) x 6-point x 3-1/10” (80mm) length, 3/8 inch square drive for use with ratchet. Fits all standard oxygen sensors with a 7/8” hexagon nut..
  • 【Design】Standard 6 point with low profile and 8mm x 64mm side cutout design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • 【USE】 Built for use with 3/8” ratchets, 1” wrenches, and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • 【Service】100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Leatherman - Tread Bracelet, The Original Travel Friendly Wearable Multitool, Stainless Steel (FFP)

  • READY FOR ANYTHING: The functionality of a Leatherman, all in one stylish package. The Tread's modular design is fully customizable to fit your needs and your wrist..
  • FIT MORE FUNCTIONALITY: A variety of box wrenches, hex drives, flat and Phillips screwdrivers, oxygen tank wrench, carbide glass breaker, sim card pick, cutting hook, socket drive adapter, and bottle opener..
  • BUILT FOR REAL LIFE: The Tread is fully adjustable to fit your wrist. Simply add or remove links in quarter-inch and half-inch increments to fit..
  • ALWAYS ON HAND: Wear your Tread everywhere so you're always ready. It's TSA compliant so you can even travel with your new favorite multitool..
  • GUARANTEED: Our 25-year limited warranty ensures that your Leatherman will give you many years of dependable service. Just send it in and we'll fix it up. All Leatherman multitools are made and repaired right here in the USA.DescriptionAnytime, anywhere. The functionality of a Leatherman tool, with you everywhere. Our engineers designed multiple tools in each 17-4 stainless steel bracelet link, making usable tools like Allen wrenches, screwdrivers and box wrenches available at a moment's notice. Adjustable to accommodate any wrist size and fully customizable with the links you need mos....
Check Stock

Issyzone Oxygen Tank Holder for Wheelchiar, Oxygen Cylinder Bag, with Nice Mesh Storage Pocket Fits D and E Oxygen Tanks, Ideal Gift for Father's Day

  • Universal Fits - Perfectly fits all wheelchairs and walkers. With this oxygen tank bag, makes sure traveling with the large tank much easier in the cart..
  • High Quality - Oxygen cylinder holder made of rugged nylon fabric, heavy-duty and waterproof. It's lightweight, easy to use and folds into a small package to store..
  • Extra Supplies - Sturdy oxygen tank holder with nice mesh storage pocket on front for extra supplies. The pocket allows you to place non rebreather mesks, books, tissue, bottles etc..
  • Nice Sturdy Straps - Easy to install and remove with hook&loop and sturdy straps. Just fasten the oxygen tank sleeve on the wheelchair / walker handles and on both sides on the bottom as well..
  • Product Size - Length 0.69'' and width 2''. Fits size D and E, O2 oxygen tanks and smaller tanks. If you have any problems, feel free to E-mail us..
Check Stock