Reviews Outer Installed Mixing Valve

American Standard TU385507.002 Reliant 3 Trim Kit with Water-Saving Shower Head and Cartridge, Polished Chrome

Includes One Piece Cartridge: Simplifies installation and maintenance.
Double Ceramic Pressure Balance Cartridge: Combination of Ceramic Disc Mixing Valve and a Ceramic Balancing Spool in a one piece cartridge.
Ceramic Disc Mixing Valve: Assures a lifetime of drip-free performance and smooth handle operation.
Ceramic Balancing Spool: Maintains a constant output temperature in response to changes in relative hot and cold supply pressure.
Ceramic material is unaffected by mineral deposits and harsh water conditions.
Integrated Check Valves: Engineered to eliminate cross flow.

【Installation】 First, Scan the QR code we shipped with the product, download the APP to install. Second, Remove tire valve caps, put in anti-theft screws.
Install outer sensor on tire valve in order.
Hold the sensor, tighten anti-theft screw. make sure sensor installed on corresponding tire valve. The pressure range that can be set as from 36.2Psi / 250Kpa / 2.5Bar to 92.6Psi / 640Kpa / 6.4Bar.

Includes One Piece Cartridge: Simplifies installation and maintenance.
Double Ceramic Pressure Balance Cartridge: Combination of Ceramic Disc Mixing Valve and a Ceramic Balancing Spool in a one piece cartridge.
Ceramic Disc Mixing Valve: Assures a lifetime of drip free performance and smooth handle operation.
Ceramic Balancing Spool: Maintains a constant output temperature in response to changes in relative hot and cold supply pressure.
Ceramic material is unaffected by mineral deposits and harsh water conditions.
Integrated Check Valves: Engineered to eliminate cross flow.

...,rv water toilet valve,water valve for camper toilet.Replaces water valve on 300, 310 and 320 series Dometic pedal-flush toilets as well as RV camper vacu-flush.If you are not sure of your machine model,contact us,we are happy to solve this problem for you..
✅【EASY TO INSTALL】: Water Valve Kit 385311641 can be installed without too many tools, just screw down and you make sure that settled properly and securely,Attach threaded spout to the outgoing water supply hose. Next, snap the opposite end into incoming water supply.also easy to remove without worry about breaking your toilet.Important: If the angle of the button is not installed properly, It will result the button is easy to be damaged because of the incorrect installed Physical angle..

COMFORT:Thermostatic mixing valve increases usable hot water on existing water heaters and new NAECA compliant water heaters.
PROTECTION: Controls hot water to prevent injury from scalding when showering, bathing or washing by ensuring water is delivered at a safe temperature to all fixtures.
SAFETY: Reduces the risk of Legionella bacteria growth by enabling hot water to be stored at a germ killing 140°F (60°C), while ensuring that water is delivered at a safe temperature to outlets.
COST EFFECTIVE: Adding a Tank Booster Pro thermostatic mixing valve to an existing water heater allows water to be stored at a higher temperature.
SHARKBITE: use with SharkBite Flexible Water Heater Connectors and Ball Valves for easy installation in systems using copper, CPVC or PEX tubing.

2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI. Pump head can be flipped.
This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine or can't reach the under side of frame such as the engine has a longer shaft. If spacers aren't used when installing, the pump legs will break from stress.

PREVENT WATER DAMAGES – This automatic shut off valve will trigger when a leak is detected from your water heater, potentially preventing 200+ gallons of water leaking into your home..
EASY TO INSTALL – The FloodStop valve is installed between the water heater and the manual shutoff valve.
SENSOR AT BASE OF HEATER – The sensor part of this system is placed at the base of the water heater. As long as the sensor stays dry, the valve will stay open permitting water to flow through to the heater..
IMMEDIATE SHUTDOWN – Once the leak sensor at the base of the heator senses moisture, the valve will immediately close off all water flow and sound alarms..
CERTIFIED LEAD FREE – Certified lead free under S. 3874, AB1953 with a One Year Manufacturer’s Warranty..

Complete disassembly and thorough cleaning via hot tank & pressure tested to confirm casting integrity.
New valve stem seals installed on all our heads & all valve guides are replaced with new ones as necessary..
Valve job Performed with all required angles & vacuum tested seals to ensure perfect compression..
All necessary parts are cleaned and inspected before final assembly to meet AERA specifications.