Reviews Orifice Flanges

Tool Daily Pressure Washer Foam Cannon for Car Wash, Snow Foam Lance, Additional Orifice Nozzle 1.1mm, 1/4 Inch

Tool Daily 1/4" quick disconnection Foam Cannon with white container bottle and additional orifice nozzle 1.1 mm for foam sprayer. Container bottle has bigger mouth to easily fill in and extra-wide neck to prevent crack issue..
EASY to install: fill some soap into the bottle with warm water to get thick foam.
Then connect 1/4" quick connection plug to Pressure Washer Gun or Wand. Specification for Pressure Washer: 1000 PSI to 3600 PSI. Finally, adjust the knob to desired foam level and then Snow Foam Lance will disperse thick foam..
Additional orifice nozzle: Backup foam cannon orifice nozzle attachs. 1.1mm orifice nozzle create thicker foam than original one below 2500 PSI. Please use original nozzle if working pressure is higher than 2500 PSI..
Application: ideal for Motorcycle, Car Washing.
floors, Windows washing, it is best product for Detailing Trucks or SUVs.
Correlation: hot release no tips bucket filter sealant wax blaster free garden jet wash plastic generation warmer care using ounce design cans turn vehicle maker temp floor variable remover guy tank products enthusiast connectors powder device brush mix black way gpm it sfl bubble truck be wall dispenser mixing chemical container duty brass max tip machines f....

Orifice 3.5. Minimum Flow Rate: 3 GPM. Minimum Pressure: 3000 PSI. Please check image 4 to choose the size of orifice. If you need orifice 2.5, please order “Tool Daily Pressure Washer Sandblasting Kit, Wet Sand blaster Attachment, 2500 PSI”..
The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input) and two hose clamps..
Replacment Nozzles are available. Product “Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sand blaster Attachment, 5000 PSI, 2-Pack”. Working pressure of pressure washer sand blaster attachment is up to 5000 PSI. Temperature is up to 140°F/60℃..
Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..

Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
HPS 304 Stainless Steel Flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
The back side of HPS V-Band flanges feature a recessed lip to help center your stainless steel tubing to the flange and allow unrestricted air flow..
HPS Stainless Steel V-Band Clamp Kit with Stainless Steel Flanges includes 304 Stainless Steel Quick Release V-Band Clamp, Male/Female Stainless Steel V-Band Flange Set, Non-locking Nut and Self-locking Nut.

▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....

REUSABLE FLANGES: Flanges are clear flanges colored for nipple visibility & alignment for easy placement and fast assembly to ensure effective....
HANDS FREE PUMPING: Completely mobile and hands-free & easy to assemble – everything fits inside the pump without cords or attachments. This breast....
AVAILABLE IN 3 SIZES: Reference our sizing chart (pictured) to determine your size for optimal pumping experience. Flanges come in three sizes: 21mm,....
PUMP AND STORE: After pumping, remove flange & milk bag and store in a cooler bag, fridge or freezer - and easily transfer to a bottle when you’re....
USE WITH WILLOW PUMP: Exclusively designed to work with the Willow Wearable Breast Pump Generations 2 and 3. The only wearable pump that is totally....

[UPDATED] A brand new Lift Tig gun with anti-aging rubber, outer woven material..
[APPLICATIONS] For YESWELDER MIG-250PRO MIG Welder, MIG-205DS MIG Welder and ARC-205DS Stick Welder..
2. Accesories: 10N50 Alumina Ceramic Cup #4 (1/4" orifice)//10N49 Alumina Ceramic Cup #5 (5/16" orifice)//10N48 Alumina Ceramic Cup #6 (3/8" orifice)//10N25 Collet 1/8"(3.2mm)//10N23 Collet 1/16"(1.6mm)//10N24 Collet 3/32"(2.4mm)//10N28 Collet Body 1/8"(3.2mm)//57Y02 Long Back Cap//57Y04 Short Back Cap..

4PK Miller style MIG gas nozzle 169-724(169724).
1/2" orifice, 1/8 in / 3.2 mm recessed tip, fits 169-724 nozzles for Miller M-25/M-40 MIG guns..
The gas nozzles don't fit Miller 180 or 190DescriptionPremium quality Miller style MIG gas nozzle 169724.
1/2" orifice,1/8 in / 3.2 mm recessed tip, fits 169-724 nozzle adapter in Miller M-25/M-40 MIG guns.
The gas nozzles don't fit Miller 180 or 190.

17 mm inserts to use with Medela/spectra 24 mm shields. It will reduce the 24-mm shield nipple tunnel down to 17 mm. Also suitable for Ameda Mya Pro,....
Maintain compatibility with most handsfree bra - Based on the Medela PersonalFit system. You can use most handsfree bra with your original 24 mm....
Can be compatible with Spectra 24mm flanges, Motif Luna 24mm flanges, Ameda Mya 24mm flanges, Ameda Mya Pro 24mm flanges, Ameda Purely Yours 25mm....
Also fits freemie 25 mm cup to reduce its nipple tunnel.

[Size] Joins 3.0" OD pipe to 3.0" OD pipe. T-Bolt thread size: M8*1.25..
[Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even....
[Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation..
[Material] Stainless steel clamp and flanges.
[Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..