Reviews Operational Amplifier

Syba SI-PEX63096 6-Channel DAC for AC3 5.1 Channels 4PIN Connector Retail

  • ... fit with most home audio system and headphones. (Note: Q4 do not support Microphone). RCA output can be connected to amplifier or powered speakers on your desktop. Built-in Hi-Fi headphone amp chip can drive most 16 Ohm to 200 Ohm headphones..
  • Q4 Heaphone USB DAC Adopts the Texas Instruments NE5532 high-performance operational amplifiers chip combining excellent DC and AC characteristics. Q4 features very low noise, high output-drive capability, high unity-gain, and maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection.Q4 has specified maximum limits for equivalent input noise voltage..
  • 160mW RMS(32 ohms, 20 Hz - 20 KHz, 0.01% THD), with bass and treble control Q4 can be used as preamp or volume controller for your PC/Computer/MAC/headphons/speakers system. Easy to set up. No special software, app, or driver to install, a true plug-and-play digital audio adapter..
  • Mini compact D/A converter, full metallic shell to ensure high quality. Stream bit-perfect 24bit/192KHz HD with low jitter, with output protect circuit, safe for your expensive audio system..
  • What You Get: Q4 USB DAC x1, USB charging cable x1, optical cable x1, PC-USB to type B cable, User Manual x1, our worry-free 18-mont....
Check Stock

Rockford Fosgate X3-Stage4 400 watt Stereo, Front Speaker, subwoofer, & Rear Speaker kit for Select Maverick X3 Models

  • SOUNDBAR: The unit mounts above the passengers so it is positioned to deliver exceptional sound quality at any speed. Installation is easy, a single harness with +12-volt, ground, and ignition wires is internally wired to the amplifier and are the only electrical connections that need to be made to make the unit operational..
  • SOUNDBAR: The source unit includes an integrated amplifier and support for Bluetooth, 3.5mm auxiliary, and USB inputs that allow you to listen to your music however you want. Additionally, the unit includes a digital AM/FM radio, digital clock, switch controlled LED map light, and cargo nets for storing whatever you need close by. Additionally, the unit includes an RCA output for connecting external amplifiers to run additional speakers or subwoofers..
  • SIDEKICK: This portable Bluetooth radio is crammed with features to keep you prepared for anything on your offroad trek, including a hand crank turbine to charge your phone, AM/FM and NOAA weather alert radio, flashlight, large ambient light, and red emergency beacon. // PHONE CASE: This TerraClamp mounts to your roll cage. Weather-resistant plastic shields from mud and water while retaining touch screen capability, and you can pop the case off the mount and take it with you..
Check Stock

MTX Audio MUDSYS46 Bluetooth Overhead UTV Audio System Adventure Bundle with Eton Sidekick Weather Radio and Phone Mount. All-Weather ATV/Powersports Soundbar with Four Speakers and Built-In Amplifier

  • SOUNDBAR: The unit mounts above the passengers so it is positioned to deliver exceptional sound quality at any speed. Installation is easy, a single harness with +12-volt, ground, and ignition wires is internally wired to the amplifier and are the only electrical connections that need to be made to make the unit operational..
  • SOUNDBAR: The source unit includes an integrated amplifier and support for Bluetooth, 3.5mm auxiliary, and USB inputs that allow you to listen to your music however you want. Additionally, the unit includes a digital AM/FM radio, digital clock, switch controlled LED map light, and cargo nets for storing whatever you need close by. Additionally, the unit includes an RCA output for connecting external amplifiers to run additional speakers or subwoofers..
  • SIDEKICK: This portable Bluetooth radio is crammed with features to keep you prepared for anything on your offroad trek, including a hand crank turbine to charge your phone, AM/FM and NOAA weather alert radio, flashlight, large ambient light, and red emergency beacon. // PHONE CASE: This TerraClamp mounts to your roll cage. Weather-resistant plastic shields from mud and water while retaining touch screen capability, and you can pop the case off the mount and take it with you..
Check Stock

Nobsound Little Bear T7 Vacumn Tube Mini Phono Stage RIAA MM Turntable Preamp & HiFi Tube Pre-Amplifier (Silver)

  • CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
  • LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference.
  • CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more.
  • SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs.
Check Stock

Fosi Audio Q4 Headphone Amplifier Mini Stereo DAC 24-Bit 192 KHz USB Optical Coaxial to RCA AUX Digital-to-Analog Audio Converter Adapter for Home Desktop Powered Active Speakers

  • ... fit with most home audio system and headphones. (Note: Q4 do not support Microphone). RCA output can be connected to amplifier or powered speakers on your desktop. Built-in Hi-Fi headphone amp chip can drive most 16 Ohm to 200 Ohm headphones..
  • Q4 Heaphone USB DAC Adopts the Texas Instruments NE5532 high-performance operational amplifiers chip combining excellent DC and AC characteristics. Q4 features very low noise, high output-drive capability, high unity-gain, and maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection.Q4 has specified maximum limits for equivalent input noise voltage..
  • 160mW RMS(32 ohms, 20 Hz - 20 KHz, 0.01% THD), with bass and treble control Q4 can be used as preamp or volume controller for your PC/Computer/MAC/headphons/speakers system. Easy to set up. No special software, app, or driver to install, a true plug-and-play digital audio adapter..
  • Mini compact D/A converter, full metallic shell to ensure high quality. Stream bit-perfect 24bit/192KHz HD with low jitter, with output protect circuit, safe for your expensive audio system..
  • What You Get: Q4 USB DAC x1, USB charging cable x1, optical cable x1, PC-USB to type B cable, User Manual x1, our worry-free 18-mont....
Check Stock

1 pc OPA1611 Module Low Power Precision op amp Audio Dedicated Audio Amplifier

  • Name: Low Power Precision Operational Amplifier Audio Dedicated Preamp Size: 50mm X 50mm Supply voltage range: up to ±18V.
  • Can be arbitrarily changed to positive amplification, reverse amplification, shooting with the integration circuit and other forms. The OPA1611 is ultra-low noise and is a powerful audio system..
  • The main features Excellent sound quality Ultra-low noise: 1.1nv/vHz at 1kHz Ultra low distortion: 0.000015% 1kHz High conversion rate: 27V/H Bandwidth: 40MHz (G=+1) Open loop gain: 130dB Unity gain stability Low quiescent current: 3.6 per channel Rail-to-rail output Wide Supply Range: ±2.25V to ±18V.
  • Application Professional audio equipment Analog and digital mixing console Audio Test and Measurement Preamplifiers microphone Broadcast recording equipment High-end A/V receiver.
  • The opa1611 bipolar input op amps achieve a low 1.1nv/VHz noise density at ultra-low distortion Hz of 0.000015% at 1kHz. The opa1611 provide a rail-to-rail output swing with a 2K2 load at 600mV, thereby increasing headroom and maximum dynamic range..
Check Stock

Juried Engineering Microchip MCP602-I/P MCP602 Dual Operational Amplifier Op-Amp 2.8MHZ 2.3V/us DIP-8 Breadboard-Friendly (Pack of 1)

  • DROK micro voltage converter with low voltage input range DC 4.8-35V, positive and negative dual output voltage is ±15V, rated output current is 660mA..
  • APPLICATION: the step-up regulator module is suitable for sensor, operational amplifier, audio and other devices that needs positive-negative power output..
  • SMALL MODULE HIGH EFFICIENCY: DROK boost converter is with small dimension 64x27.5x12.5mm.
  • the small module conversion rate can be up to 88%..
  • TWO MOUNT METHODS: the volt transformer module not only support row pin welding, but also lead mounting, which will be convenient for your use..
  • NOTE: please note that although the module is with short circuit protective function, it can not in long continuous short circuit, or it will be damaged..
Check Stock

Pyle Phono Turntable Preamp - Mini Electronic Audio Stereo Phonograph Preamplifier with RCA Input, RCA Output & Low Noise Operation Powered by 12 Volt DC Adapter - PP999 , Black

  • CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
  • LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference.
  • CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more.
  • SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs.
Check Stock

Phono Turntable Preamp, Phonograph Preamplifier with RCA Input, RCA/TRS Output, Phono Preamp for Turntable Record Play with 12 Volt DC Adapter

  • Convert Phono Signal：The Turntable Preamp Converts phono signals to line level for better sounding audio and volume.This state-of-the-art phono preamp can accommodate all magnetic pickups..
  • Low Noise Operation: The Turntable Preamp offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers.Make your vinyl records deliver sound exactly as it’s read from your turntable’s needle..
  • RCA Input & RCA /TRS Output: This Mini Preamp has stereo RCA inputs , stereo RCA and TRS outputs. Connect the turntable to the RCA inputs and ground Then, connect the amplifier receiver to the RCA/ TRS outputs(DC 12V Adapter is included)..
  • Simple Plug & Play:Connect any Phono Turntable Preamps to modern sound equipment without specialized phono input for amplifying music.Simply hook up the preamp to both turntable and audio device so you can enjoy vinyl in no time..
  • 1 Year Warrranty: We guarantee this Electric Phono Preamplifier with both a 30-day, no hassle money back return policy and a 1 year manufacturer’s guarantee..
Check Stock