Reviews Open Valve

3/4 Brass Electric Solenoid Valve 110V AC Normally Closed Water air Diesel by U.S Solid

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

3/8 Electric Solenoid Valve 12-VDC VITON Gasket Air Gas Fuel Normally Closed

  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
Check Stock

3/4\ Ball Valve, 1 Pack Male NPT (MNPT) X Female NPT (FNPT) Thread,Stainless Steel Shut-Off Valve for Water,Oil and Gas (3/4 inch, 1 pack)

  • Ball Valve：Male NPT (MNPT) X Female NPT (FNPT) screw thread connections,1,000 WOG (PSI) full port heavy duty ball valve is made of 304 stainless steel,safer and stronger,anti-corrosion,long lifetime..
  • Good Sealing：KAPUNOS ball valve has two sealing surfaces with good sealing performance,it can achieve complete sealing..
  • Convenient Operation：KAPUNOS high pressure ball valve has a comfortable operating handle,which opens and closes quickly,It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Widely Used：Ball valves are widely used in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc. Also can be used for mechanical equipment, industrial equipment, water supply and drainage equipment..
  • Suitable for Media：The high-quality 304 stainless steel ball valve is suitable for water, sea water, air, oil and steam media.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
Check Stock

JACO Bike Presta Valve Tire Air Chuck - 1/4" NPT (2 Pack) (Open Flow)

  • Open Flow - these Presta valve attachments are open flow, meaning air will flow freely through the chuck even if not engaged with the tire valve stem (no check-valve). Must be used with an inline tire inflator gauge or standard tire gauge (Not for DIRECT connection to air compressor hose)..
  • 1/4 inch F-NPT fittings - feature a standard 1/4 inch F-NPT fitting, making them compatible with inline tire inflator tools and tire gauges..
  • Rugged & reliable - these straight angled Presta valve tire chucks are made of high-quality brass, providing a sturdy and reliable connection between your tire inflator tool and your bike tires..
  • Presta valve compatibility - the air chucks are specifically designed to work with presta valve equipped bike tires, allowing you to quickly and easily inflate your tires (NOT for Schrader valve types)..
  • Easy to use - simply attach them to any hand-operated, inline tire inflator tool connected to an air compressor hose, and start inflating your tires (NOT for use with floor pumps, hand pumps, or 12v air compressors)..
Check Stock

VEVOR Bag Air Jack 11000lbs Capacity Pneumatic Jack Quick Lift 5T & Mophorn Pneumatic Jack 3 Ton Triple Bag Air Jack Lifting Height Pneumatic Air Jack 6600LBS Capacity Extremely Fast Lifting Action

  • ...tic jack is built with high-strength steel that makes the whole body sturdy and durable. The powder-coated steel frame and rubber match to reduce impact. Highly sealed airbags will not leak or be scratched. A larger stressed area fits on a soft and easy-collapsing place..
  • Product 1: Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air.
  • when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The safety valve in the middle ensures the injected gas is not excessive to ensure the security of the use process..
  • Product 1: Space-saving Design: Carrying handle design fits the shape of the hand, so you can fully control the jack when you use it. And the whole structure is compact and easy to store. So you can take it outdoors conveniently..
  • Product 2: Labor-Saving Jack: Pneumatic jack capacity: 6600 lbs/3T. Minimum height: 5.3"/135 mm. Maximum height: 15.75"/400 mm. It only takes 5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lift..
  • Product 2: Heavy Duty Construction: Our pneumatic jack is built with high-strength steel that makes the whole body sturdy and durable. The powder-coated ste....
Check Stock

Motorized Ball Valve- 1/2 Stainless Steel Electrical Ball Valve with Full Port 9-24V AC/DC and 3 Wire Setup by U.S Solid

  • SAFE AND RELIABLE- The valve body is made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
  • NPT THREADING- ½" Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a....
Check Stock

1/4 NPT Brass Electric Solenoid Valve 12VDC Normally Closed VITON Standard USA Pipe Thread Solid Brass Direct Acting Viton Gasket Solenoid Valve by U.S Solid.

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

Coodss Dry and Wet Mop Cleaning Head for Dyson V7 V8 V9 V10 V11 Wireless Vacuum Cleaner Accessories Electric Cleaning mop Head,Hardwood Floor Attachment

  • The Dual Spinning Mop head - attachment for Dyson vacuum cleaner V7 V8 V10 and V11 models, allowing you to vacuum and mop simultaneously. It have a water tank to wet floor mopping.Note: * Please add water to the open tank and rotate the valve above the tank to let the water out *. * Do not use this mop head on a flooded floor *.
  • Tough on Dirt - Spinning at a dizzying 160 RPM, the scrubbing mop head can easily cut through dirt and stubborn grime on your wood, vinyl and ceramic tile smooth floors.Note: * Please add water to the open tank and rotate the valve above the tank to let the water out *. * Do not use this mop head on a flooded floor *.
  • Efficient Cleaning – With a high powered dual spin motor, it cleans incredibly efficient up to 7-10 cubic meters per minute, saving your time and labor.Note: * Please add water to the open tank and rotate the valve above the tank to let the water out *. * Do not use this mop head on a flooded floor *.
  • Easy for Maintenance – Made of nanoscale nylon cloth, the washable mop pads are effective to collect dust and water without stains, streaks or marks on the floor.Note: * Please add wa....
Check Stock

hygger 25ft Semi-Automatic Aquarium Water Changer, Fish Tank Gravel Cleaner, with Flow Control Valve

  • 【Quickly Change Water 】just use a long flexible hose and 2 flow valves, you can change the aquarium water more quicker and easier, no need electric, it's semi-automatic water changer suitable for medium and large fish tanks. No spill, no mess and no heavy lifting for changing dirty water and adding clean water.
  • 【Aquarium Gravel Cleaning 】When you use this water changer to suck away aquarium dirty water, you can move the gravel tube to cleaning the gravel or install the duckbilled on to clean fish feces. With the pressure from the water, the gravels and sands can be sucked up to the gravel tube then to vacuum out the debris in gravel.
  • 【Non-electric & Quiet】this aquarium water changer is not electric, no noise no disturb to your fish or plants. All you need to do is to control the 2 valves and open the faucet. With 2 orange built-in control valves on the water changer, to turn it on or off you just need to rotate the valve by 1/4 turn up or down. To add clean water in to aquarium, please remember to keep the water flow assembly valve closed, so when you open the faucet the water will flow into the hose.
  • 【3 sizes available】choose the size according to the distance from your fish tank to the sink faucet, flexible water hose length available:....
Check Stock