Reviews One touch Fittings

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....

Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male ....

Check Stock

Universal 8mm Quick-Disconnect Plug Adapter Stainless Steel 1/8 BSPP Female Thread PCP Paintball Charging Fittings with Sealing O-Ring

Material - This 1/8" BSPP female thread quick disconnect plug is made of high-quality Stainless steel, Size: 26mm / 1.02 inch Length, male quick....
Accuracy - Use NC machining, accurately, accurately, suitable for 8mm converter plug and 1/8" BSPP male thread, supplied with sealing ring washer,....
Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, It can withstand 3000-5000 psi pressure, this is one....
Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air....
Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA....

Check Stock

Ivation 320,000 BTU Propane Torch, Heavy Duty Weed Burner, Extra Long 12’ Hose, Adjustable Flame Control, Outdoor Weed Killer for Weeds, Snow Melting, Roofing, Roads & More

no assembly required. The Swirl Flame ensures the maximum Heat Output!.
This Blow Torch has automatic one-touch ignition which makes the lighting quick and easy.
There is comfort ergonomic grip on the gas torch handle.
Use Propane or MAPP disposable fuel tanks (not included in the package).
This Welding Torch kit use such gas as MAPP, Propane (not for acetylene), with CGA 600 Connection.

Check Stock

Excavator Hydraulic Breaker Hammer Attachment Without Autogreaser | Heavy Equipment Machinery Parts | Fits Sany 35-48 Ton Machine

HYDRAULIC BREAKER HAMMER ATTACHMENT WITHOUT AUTOGREASER – This part fits Sany 35-48 Ton Machine Excavator. OEM Part Numbers:.
PROVEN AFTER-MARKET COMPONENTS – RAM Industrial provides the most proven after-market components for heavy machinery and equipment in the market. *DISCLAIMER: These are aftermarket parts. Some fittings may be different sizes or styles due to updated versions. If your old fittings do not work, please contact us and we will send fittings out to you immediately..
REDUCE MAINTENANCE COSTS BY 50 PERCENT – Our quality components reduce customer maintenance costs by up to 50% in comparison to OEM replacement options. These new, after-market options offer even greater value parts and machines are discontinued by manufacturers..
6 MONTH WARRANTY – RAM Industrial after-market hammers have a 6 month parts only warranty including all of our branded breakers and other components..
WHAT'S INCLUDED? – Included with this hydraulic breaker hammer is one moil point, one flat chisel point, a tool box, hydraulic kit, and a parts manual..

Check Stock

McKillans Short Pressure Washer Gun with Swivel - High Pressure Water Handle with 3/8" Male Plug and 1/4” Quick Connector Coupler - Power Washer Gun Compatible with Foam Cannon - Car Wash Foam Gun

✅ Swivel Design: Equipped with a swivel inlet that allows your hose to rotate freely during use, prevent annoying kinks and wrestling with your hose..
✅ Preinstalled Fittings: Our guns come with the fittings preinstalled with teflon tape and locktite. Saving you time and effort..
✅ Lightweight Pull Trigger: Hold the pressure washer gun for long durations without getting tired. The snub nose design makes it easy to maneuver with just one hand. The short gun design is very convenient for use with a foam cannon..
✅ Why Us: Our swivel is one of the smoothest in the market. Built with real stainless and brass fittings, unlike the competition. Preinstalled fittings ensuring durability and leak resistance..
✅ Made for Detailers: The McKillans Pressure Washer Gun is the perfect upgrade for your power washer. The integrated swivel helps save you time by keeping your hose tangle free. The small body design makes the gun easy to handle and maneuver. Stop using the long, leaky, and cheap stock gun that comes with your pressure washer, and upgrade to a quality gun. The small design ma....

Check Stock

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....

Check Stock

iCrimp Push-to-Connect,Push-fit Disconnect Clamp Tool for Brass-Push Fittings Removing,Multi-size Combination 1/2",3/4",1"-CRQ02

「VERSATILE TOOL」With one tool allows 1/2”,3/4”,1” Push-to-Connect to be disconnected from the copper, CPVC, or PEX pipe, no extra interchangeable faceplates required..
「REMOVES IN SECONDS」Simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly..
「DURABILITY」Constructed of high-quality carbon steel with corrosion resistance ensures reliable functionality and long service life..
「ERGONOMIC DESIGN」TPR coated grips prevent slippage in wet conditions and one-handed operation design to allow your free hand the ability to assist in the removal of fittings..
「VERSATILITY」It's compatible with brand Push-fit/Push-to-Connect fittings..

Check Stock

Raindrip 63100UB Professional Hole Punch

Punch holes in supply tubing for easier insertion of ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts.
Holds ½ in., 5/8 in., and 0.710 in. supply tubing to punch holes to fit ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to punch holes.
Hand-held tool is designed with a comfortable pistol grip for strain-free use.
Metal hole punch tip penetrates tubing wall when handgrip is pressed.
Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
Comes with one Pistol Grip Hole Punch Tool.

Check Stock