Reviews Omc Jack Plate

RuiLing 2PCS Square Jack Output Plate Guitar Bass Jack Socket for Electric Guitar Parts and Accessories Black

  • Package includes: 2x jack socket + 8x mounting screws.
  • Jack Socket Cover plate for Square Style..
  • Standard square plate which is used commonly..
  • Mainly for guitar bass jack plate replacemen,replace your worn out parts..
  • Easy to install and looks very professional..
Check Stock

Akron Products Big-Moe Adjustable Floor Jack - Size Range 4'8\-8'4\ (11GA)

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

Acacia Hardwood Interlocking Deck Tiles - Walnut Straight - 12\×12\ 9pcs - Floor Tiles for Patio and Deck Use Natural Wood Outdoor Decking and Flooring, Rain and Weather Resistant, Heavy Duty

  • ... Kit brings crooked, warped, or bowed flooring strips into place for fixing and holds them in place during installation.
  • Flooring jack laminate jack is not for lifting.
  • [For Any Floor Thickness]: Laminate flooring jack features universal adjustable length from 14 to 16.7 inches (35.5-42.5cm).
  • 13 x 0.9 x 0.6-inch (33 x 2.4 x 1.4cm) rack.
  • 1.1 x 4.25 x 1.9-inch (2.9 x 10.8 x 4.8cm) rack plate.
  • 3.9 x 8 x 0.2-inch (9.8 x 20.3 x 0.5cm) lifting plate.
  • [Easy to Use]: Place flooring wall jack against wall or wall-stud.
  • Use locking ratchet to push or pull flooring strips into place (ratchet downward to force, push lever up or forward to release gear drive mechanism).
  • [Prevent Injury]: Keep hands free when nailing hardwood flooring with floor jack hardwood jack.
  • Nail or glue down flooring strip when starting at straight line.
  • Additional force can be applied if straightening.
  • To release flooring jack install for wood, raise handle fully forward to disengage pawls and manually retract bar.
  • [Quality You Can Trust]: No need to worry about professional hardwood floor jack falling apart under pressure.
  • Flooring jack positioning tool constructed from steel with hardened gear and spring-loaded ratchet mechanism fo....
Check Stock

Adjustable Support Jack for The Floor,Post Floor Joist Jacks,Mini Screw Jack- Post 10\ to 13\

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

Water Pump Impeller Kit for Volvo Penta Replaces 21213660 3855546 825940 3858256 3862281 21951348

  • New impeller used by Volvo Penta, OMC, Johnson F5B pumps, Onan, Perkin, Yanmar, Jabsco and others.
  • Width 1-1/4" (31.5mm) . Diameter 2-1/4" (57mm) . 5/8 shaft 12 spline.
  • Includes O-rings and gaskets to fit mulitple applications. Recommended to replace annually. Install with dish soap..
  • If purchasing for Volvo Penta or OMC it only fits pumps with short screws prior to 2005. Please see picture..
  • Replaces: Volvo-Penta 825940, 860203, 3855546, 3858256, 3862281, 21213660, 876243, 3862567, 3856039 , 877400, 3862567 , 875811-2, 3856029, 21951346.....
Check Stock

KUAFU Jack Plate Adjustable 8'' Outboard Boat Jack Plate Aluminum Manual Power-Lift

  • The outboard jack plate is the perfect solution for long shaft engines with a short shaft transom. The jack plate allows the boat to navigate in shallower waters, which is difficult for a normal engine to do. It also reduces fuel consumption and gives you a good value for money..
  • The outboard jack plate is made of stainless steel fasteners for maximum strength and durability. Durable, anti-wear and anti-rust, not easy to damage, so that you do not need to worry about the problem of broken or rust in daily use..
  • Adjusts easily by turning one steel bolt, offers 4 inches of adjustable Vertical movement,8 inches of setback, Weighs 32 lbs, 225 Maximum Horsepower. Bronze and Brass hardware eliminate binding..
  • The size can be adjusted according to your needs. Item type: Outboard Jack plate.
  • Feature: Color: Sliver, Material: high strength polished Aircraft Quality Aluminum, Condition: New..
  • BUY WITH CONFIDENCE. 100% SATISFACTION GUARANTEE: We are sure you will love our high quality products. However, if you are unsatisfied with either way, you have No-Questions-Asked, 30-DAY Money-Back Guarantee..
Check Stock

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has an 11,200-pound (5,080 kg) capacity.
  • Max height has a 2,500-pound (1,134 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

Arieltek Outboard Switch Box CDI Power Pack Ignition Unit for Mercury Marine Two Cylinder Outboards 4 to 20 HP 1974-1986

  • OEM Quality Aftermarket Evinrude Johnson OMC Outboard CDI Power Pack.
  • Replaces Johnson Evinrude OMC part numbers 584489 583896 583984 584331.
  • FITS: 20 / 25 / 28 / 30 HP 1989-1992 UFI 25 commercial 1989-1991 UFI 40/50 HP 1989-1992 UFI 48 1989-1993 UFI 45/55 Comm. 1989-1991 UFI.
Check Stock

HDMI Coax Wall Plate 1 Port 4K HDMI Keystone Female to Female 1 Port F Type Connector Coax Keystone Female to Female Wall Plate - White

  • Completely Assembled Wall Plate - The wall plate and keystones have been assembled already, You can install it in the wall directly. No need to....
  • Easy to install - Installs just like any light switch plate, all you need is a standard screwdriver and plug the cable into the front and back.Then....
  • Convenient usage - This wall port jack is the perfect solution for connecting TV boxes, Router or other Coax/Ethernet Channel-enabled devices to your....
  • COMPATIBLE WITH [email protected]: HDMI Wall Plate is compatible with [email protected] for your high-resolution needs..
  • Package Contents:2 Port Wall Plate + HDMI Keystone Jack + Coax Keystone Jack + 2 x Screws.(Not included Low-Voltage Mounting Bracket)..
Check Stock