Reviews Old Logging Equipment

Megger MIT515-US Insulation Tester, 10 Teraohms Resistance, 5kV Multi-Range Test Voltage

  • Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment.
  • Multiranging digital meter performs timed IR, PI, and DAR.
  • Memory includes time/date stamping of results and data logging.
  • Measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads.
  • Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water.
Check Stock

Simond Store Logging Tong, 25 Inches, Swivel Grab Skidding Tongs with Ring for Logging Forestry Grappling Firewood Fire Log - Heavy Duty Steel Log Grabber (25 Inch)

  • [Heft Logs with Ease]: Use the Felled Logging Grabber Lumber Grapple Logging Claw for dragging and lifting logs.
  • Pole lifting tongs will grip tighter the more it is pulled.
  • Efficiently lift large and small logs with this lifting grapple timber grapple.
  • [Industrial Strength]: Save your back the stress and pain of lifting logs by yourself.
  • Lumber tongs have a lifting capacity of 3,000 pounds (1,360kg).
  • Log lifting hook includes 4 angled claw points and an opening range from 4 inches (10cm) to 28 inches (71cm).
  • [Built to Last]: No need to worry about this logging claw grapple tongs bending or breaking while in use.
  • Wood logging hook timber grabber claw is constructed of durable carbon steel.
  • Grapple hook features red powder-coated finish.
  • [For Your Vehicle]: Skidding tongs are designed with your workspace in mind.
  • Connect this log lifter to your truck, skidder, ATV, tractor, and other vehicles.
  • Ring of the log hook grapple is 3/4 inches (1cm) thick with an inner diameter of 1.75 inches (4cm), outer diameter of 3.25 inches (8cm).
  • [Perfect Fit and Form]: Logging clamp stump grabber will help you lift and drag logs for clearing away trees and moving large firewood.
  • Log arch skidder weighs 20 pounds (9.5kg) with total dimensions of 28 x 12 x 2 inches (71 x 30 x....
Check Stock

LEGO Technic Forest Machine 42080 Building Kit (1003 Pieces) (Discontinued by Manufacturer)

  • Build a durable Forest Machine with motorized pneumatic crane boom and grabber with this advanced building set!.
  • This 2-in-1 model can be rebuilt into a Log Loader both logging equipment toys are powered up with LEGO Power Functions.
  • Forest Machine with boom retracted measures over 7” (18cm) high, 13” (35cm) long and 5” (13cm) wide Log Loader measures over 6” (17cm) high, 13” (35cm) long and 5” (13cm) wide.
  • 1003 pieces – Forest harvester farm machine toys for boys and girls aged between 10 and 16 and for fans and big kids of all ages.
  • The LEGO Technic Forest Machine 42080 farm toy can be built together with all other original LEGO sets and LEGO building bricks for creative construction.
Check Stock

Traceable Excursion-Trac™ Data Logging Thermometer with Calibration; 1 Bottle Probe

  • ...recision bench top thermometer offering a convenient USB interface for data logging and sensor configuration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment f....
Check Stock

AT4516 16 Channel Digital Thermometer High Temperature Data Logger Temperature Chart Recorder

  • ...recision bench top thermometer offering a convenient USB interface for data logging and sensor configuration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment f....
Check Stock

Traceable Memory-Loc Dual Zone Temperature Monitoring & Data Logger Kit (TM-6441)

  • ...recision bench top thermometer offering a convenient USB interface for data logging and sensor configuration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment f....
Check Stock

ThermoProbe TL2-A Precision Bench-top Laboratory Reference Thermometer – Dual Channel & USB Data Logger

  • ...recision bench top thermometer offering a convenient USB interface for data logging and sensor configuration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment f....
Check Stock

ThermoProbe TL2-A Precision Bench-top Laboratory Reference Thermometer – Dual Channel & USB Data Logger

  • ...recision bench top thermometer offering a convenient USB interface for data logging and sensor configuration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment f....
Check Stock

Redneck Convent Spiked Tree Felling Wedges for Tree Cutting – 5.5in Green Plastic Felling Wedge, Logging Tools – 4 Pack

  • ...ere is space behind the saw and finish cutting.
  • The tree wedge will create a mechanical lifting force that pushes the center of gravity for the tree away from you in the direction you intend.
  • CONTENTS: These chainsaw wedges come with (4) 5.5-inch green wedges.
  • Always wear safety glasses and other personal protective equipment when felling.
  • Wedges are not designed for splitting firewood.
Check Stock