Reviews Oil based Coolant

6.0L Powerstroke Oil Cooler Flush Kit,Blue Anodize Adapter Flush Adapter for Ford 2003 2004 2005 2006 2007 2008 2009 2010 Diesel

  • With our 6.0L Power Stroke Oil Cooler Flush Kit, the oil cooler can be backflushed in less than an hour. By directing the water flow in the opposite direction of normal travel, contaminants are removed and, in most cases, the cooler is restored to new effectiveness..
  • No need to remove the plant cooling manifold. Coolant enters the cooler from the oil cooler, and when disturbed, the quick connection hose between the oil cooler and the cooler will usually start to leak, resulting in rewinding. Our device will not interfere with the original connection..
  • It is advisable to regularly monitor the Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification we recommend performing an oil cooler flush. Careful attention to this detail can prevent thousands of dollars of engine and fuel system damage. In the case of a cooling system that has experienced extreme neglect,even a new cooler can become restricted by contaminants quite quickly..
  • Package Includes 1x Flush adapter and 1x aluminum anodized adapter.Feel free to contract us if you meet any problem with the product. We'll reply you within 24 hours..
Check Stock

10FT 6AN Braided Fuel Line Hose -6AN Nylon Braided for 3/8\ Tube Size

  • Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc.
  • Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch).
  • Working pressure: 500 PSI. Burst pressure: 2000 PSI.
  • Note: Double check the hose size before bidding. Our rubber hose should compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT..
Check Stock

Genuine Ford Fluid VC-13DL-G Yellow Pre-Diluted Antifreeze/Coolant - 1 Gallon

  • Yellow-colored, longer-life, ethylene glycol-based antifreeze/coolant for use in gasoline and diesel engines.
  • Provides year-round antifreeze, anti-boil and corrosion protection.
  • no need to add water - the 50/50 mixture of coolant and treated (purified) water provides freeze protection down to -34°F (-37°C) and boiling protection up to 265°F (129°C).
  • Do not mix different colors or types of coolant in your vehicle.
Check Stock

HORUSDY No-Spill Coolant Funnel Kit with Valve Switch, Radiator Bleeder Funnel Kit, Universal Fitment Applicable to Any Vehicle (15 Piece)

  • ..., ensuring an optimal fluid flow. The funnels are available in multiple colors and 2 sizes so that you can find the perfect fit for you! Large funnel dimensions: 5" diameter mouth, 17" overall length. Small funnel dimensions: 4" diameter mouth, 13" overall length..
  • ✅ HEAVY DUTY: Our gas funnel is made to last. The coolant funnel is produced from a single piece of nitrile chemical-resistant rubber (NBR), making it impossible to break or crack, unlike plastic funnels that can easily develop leaks over time. Oil funnel for oil change can withstand even the roughest treatment and still look and function like new! The flexible funnel smooth interior walls prevent any accumulation of grime that can lead to fluid contamination!.
  • ✅ VERSATILE: The Flex-All Funnel is the last funnel you'll ever need! This heavy duty funnel is perfect for any job that includes transferring fluids. The automotive funnel has an anti-spill and anti-splash design which helps to prevent the mess. Our car funnel has a wide mouth and sturdy integrated handle, so it's easy to use even when you're wearing gloves! With the long funnel trimmable outlet, you can customize it to your needs!.
  • ✅ COMPATIBLE WITH MOST FLUIDS: Our funnel with hose is safe to use with: engine oil, kerosene, di....
Check Stock

Hougen HMD904S 115-Volt Swivel Base Magnetic Drill Fabricator's Kit with Integrated Coolant Bottle Plus 1/2\ Drill Chuck, Adapter, and 12002 Rotabroach Cutter Kit

  • The mag drill of choice for fabrication. Lightweight, compact, powerful, & versatile. Large 1-1/2" x 2" capacity - Hidden motor cord - Ergonomic housing - Increased safety with less maintenance.
  • Lower overall height - Pilot light - Two stage magnet - 30% power increase when motor is turned on - Positive slug ejection - Slot Drive arbor for more accuracy and quicker change out of accessories.
  • Feed handles quickly change from side to side - Lift detector safety system - Rear mounted controls - Gravity feed coolant system - Carrying case included (09202) - Two year warranty.
  • Swivel Base adds even greater versatility:Precisely line up your pilot with the holes center location - One stroke lock and unlock handle - Great for horizontal, overhead, tight areas, and getting out over another piece of steel - Patented.
  • Hougen HMD904S 115-Volt Swivel Base Magnetic Drill Fabricator's Kit Includes: HMD904 Swivel Base Coolant, 1/2" Drill Chuck, Adapter, & "12,000-Series" Cutter Kit ((2) Pilots, (2) Wrenches and (5) Cutters (9/16, 11/16, 13/16, 15/16 & 1-1/16")) and Carrying Case, Pint of Coolant, Safety Chain, & Hex Wrenches..
Check Stock

Mishimoto MMRAD-GMT-99 Performance Aluminum Radiator Compatible With Chevrolet Silverado 1999-2014

  • Direct fit for 1999–2014 Chevrolet Silverado / GMC Sierra 1500 V8.
  • 72% increase in coolant capacity over stock.
  • 69% increase in surface area over stock & 92% thicker than stock radiator.
  • 46°F reduction in coolant outlet temperatures over stock.
  • Includes both transmission and oil cooler ports with pre-installed fittings as well as the Mishimoto Lifetime Warranty.
Check Stock

X AUTOHAUX VS50807R Valve Cover Gasket Set for Chevrolet Cruze Sonic Trax 1.4L L4 2013-2020 for Buick Encore for Cadillac ELR VS50710 55573747

  • ..., sealing, oil resistance, wear resistant,high temperature resistance, corrosion resistance, long service life, effectively prevent engine oil leakage into the valve mechanism..
  • Function:The purpose of the valve cover gaskets is to seal the cylinder to ensure no leakage of coolant or oil into the cylinder. Head gaskets prevent leakage of liquid and gas into adjacent cylinders and surrounding coolant galleries..
  • Replacement:If your valve cover leaks, your oil is always low, or you smell burning oil, you will need to replace the valve cover gasket..
Check Stock

15 PCS No-Spill Coolant Funnel Kit Radiator Funnel burping kit funnels for Filling Bottles Universal Fitment Aplicable to Any Vehicle funnels for Automotive use 4PCS Round Kitchen Funnel Oil Funnel

  • coolant funnel kit for engine flushing, radiator flushing, changing car coolant. There are several different nozzles that can be attached to ensure that your radiator has the right nozzles..
  • Funnels for automotive use. It is suitable for American and other vehicles. The 4 complimentary funnels for kitchen use,oil funnel for oil change small funnel makes pouring so much easier..
  • flexible funnel allows you to keep a close eye on the liquid level as you work. The funnel is marked with a scale. Its stoppers help control flow and prevent air gaps, while sealed extensions and elbows allow you to work in hard-to-reach places..
  • coolant funnel set contains a transparent antifreeze funnel,a Lid,a Fluid Stopper,5 Adapters with Gasket,4 Filler Caps,2 45°elbows,one 5"Straight extender,and 4 Yellow filling circular plastic funnels.
  • large funnel is Great product, easy to use, should fit almost any car. The funnel comes with a lid that allows you to store all of the parts inside..
Check Stock

25 Ft 6AN AN6 (3/8') Universal Braided Stainless Steel CPE Oil Fuel Gas Line Hose

  • Application for Racing Fuel, Pump Gas, Fuels with Ethanol, Alcohol Based Fuels, Motor Oil & Coolant etc.
  • Length:25 Ft , Inner Diameter: 8.73 mm (0.343"), Outside Diameter: 13.89 mm (0.547"), Universal Accessory, Easy to Operate.
  • Good Quality and Durability, Working Temperature: -40F to 248F (-40°C to + 120°C) under most operating conditions.
  • Working Pressure:1015 PSI - Burst Pressure: 6090 PSI.
  • Braided fuel hose with special hand feel.
  • Perfect racing fittings for fuel injection use.
Check Stock