Reviews Oil Suction Hose

VINGLI 1-1/2-Inch x 40-Feet Swimming Pool Vacuum Hose for In-Ground Pool Foot Professional Heavy Duty Pool Hose, Blue

  • ...m material has sun, rain, snow, UV resistance, heat insulation, moisture resistance, chemical resistance, non-toxic and non-absorbent..
  • HOOKING IT UP IS EASY: （NOTE: Please remember to empty the air in the hose by filling entirely with water before use for getting proper suction and good work performance.) Hooking hose up is easy and you just simply remove the older and dirty hose and then replace your pool hose, helps speed up your pool vacuum cleaning process..
  • FLEXIBILITY & STONG SUCTION: Excellent tensile strength, compressive operation. Heavy duty hose has strong suction and doesn't kink. One end can connect directly onto the vacuum head and the another end connects to the skimmer, which can improve strength, flexibility and maximum flow rate..
  • WIDELY USED: The pool vacuum hose can work with standard swimming pool vacuum head and telescopic pole for manual vacuuming, but not suitable for automatic suction cleaners or robotic pool cleaners. The swimming pool hose is perfert for cleaning both large and small size pools. It is the best choice for cleaning for swimming pools at home, house, apartment, condo, hig....
Check Stock

ABN Engine Cleaning Gun with 4ft Siphon Hose, Siphon Spray Gun Cleaning Kit – Car Engine Cleaner Degreaser Tool

  • ...1/4-inch (6.4 mm) air inlet that attaches to the supplied siphon hose, and a 1/2-inch (12.7 mm) inlet to attach an air compressor.
  • The oil spray gun operates with 1-HP or large air compressor delivering 3.0 Cubic Feet per Minute at 90 Pounds per Square Inch offering maximum flow for easy clean up.
  • EASY CLEANING: The suction feed style gun uses air pressure to spray substances from an attached tank (tank not included).
  • This powerful engine cleaning gun is lightweight, easy to maneuver, reaches deep into engine bays, and fits well in hand.
  • A 1/4-inch (6.4 mm) air inlet offers maximum flow for easy clean up and blowing off heavy shavings and chips to messy gutters.
  • Always remember to wear protective equipment such as safety goggles when using air pressure sprayer.
  • VERSATILE: Use this air pressure washer shop air gun with compressed air and water, soaps, and other solvent cleaners to clean heavier soiled surfaces and remove unwanted messes in your engine bay, workshop, gutters or deck.
  • Or, use this oil spray gun with kerosene, oils, and other solutions for a variety of projects.
  • Solvent gun not designed for use with paint.
Check Stock

BISupply 10 Foot Water Pump Hose for Water Transfer Pump - Spigot Suction Intake Outtake Clear PVC Hose with Couplings

  • [Transfer Water Anywhere]: The BISupply 10-Foot Transfer Water Pump Suction Hose is a transparent PVC hose that is lightweight and portable.
  • Use to evacuate a flooded yard, pump out water from a barrel, and more.
  • [Perfect Size]: 10-foot (3m) long water pump hose has brass male and female end fittings.
  • Fittings designed to fit standard garden hose spigot.
  • [Use Your Pump]: Threaded brass ends for use with your water pump.
  • Fits any sized pump with necessary adapter pieces (adapter and rubber gasket not included).
  • [No Collapsing]: Constructed from transparent, flexible PVC that is reinforced to handle full vacuum (suction) and pull water from a source through your pump without collapsing.
  • [Package Contents]: Hose water pump package includes (1) water suction hose, male/female brass couplings, and (6) plastic zip ties.
Check Stock

Hand Operated Pail Pump, 4 gpm, 25-1/2" H

  • Price For: Each Suction Tube Outlet O.D. Size: 63/64″ Suction Tube Material: Polyethylene Max. Liquid Temp.: 130 Degrees F Suction Tube Outlet I.D. Size: 61/64″ Ounces per Stroke: 3 oz. Discharge Tubing Material: Polyethylene Outlet Size: 1″ Max. Pressure: 5 psi Piston Material: Polyethylene Metered: No Discharge Tube Outlet OD Size: 3/4″ Manufacturers Warranty Length: 1 yr..
  • Discharge Tube Length: 25-63/64″ Length: 2-1/2″ Inlet Size: 1″ Agency Compliance: FDA Compliant Discharge Size FPT (In.): 3/4 Max. Viscosity: 300 cps Hose Inside Dia.: 23/32″ Min. Length: 4″ Housing Material: Polyethylene Hose Length: 2 ft. For Use With: 5 gal., 6 gal., 7 gal. Pails, Food Products, Dyes, Additives, Colorings, Chemicals Compatible with Polyethylene Action Type: Siphon.
  • Hose Material: Polyethylene Suction Tube Length: 16-47/64″ Max. Head: 2 ft. Self-Priming: Yes Wetted Materials: Polyethylene Discharge Tube Outlet ID Size: 11/16″ Width: 5″ Suction Tube Type: Tube GPM: 4 Height: 25-1/2″ Item: Hand Operated Pail Pump Country of Origin (subject to change): South Korea.
Check Stock

Tigerflex TG Series EPDM Tiger Green Suction Hose with Polyethylene Helix, 50 PSI Max Pressure, 1-1/2 inches ID, 100 feet Length

  • 2" Inside Diameter (2.33” Outside Diameter) Liquid Suction Hose, 20 foot Length.
  • Does not include fittings, but is compatible with most 1-1/2" hose fittings with a hose shank..
  • This Suction hose has a 65 PSI working pressure and a 28 inHg vacuum Rating at 68 degrees fahrenheit..
  • Typically used on the suction side of liquid or water transfer applications.
Check Stock

ARCAN PROFESSIONAL TOOLS Suction Gun Transparent Body and Ribbed Nozzle 16 OZ Chamber Capacity ASTSG

  • APPLICATION: Used for injecting and removing transmission oil, gear oil, and other automotive fluids..
  • RIBBED NOZZLE: Creates a tight seal from the hose to the gun for maximum suction..
  • TRANSPARENT BODY: Increased visibility of fluids during transfer..
  • SOLVENT RESISTANT: Can be used with any non-corrosive lubricants..
  • CHAMBER CAPACITY: Can hold up to 16 oz. of automotive fluid..
Check Stock

Replacement Hose Handle Compatible With Shark Navigator NV350,NV351,NV352,NV355, NV356, NV357 Vacuum Cleaner Replace Parts No 113FFJ - Light(1 Pack)

  • 【WORKS FOR A WIDE VARIETY OF SHARK MODELS】: Quit paying an arm and a leg for OEM parts! This hose replaces Shark Rotator Professional Lift-Away Upright Vacuum , Replacement hoses are compatible with Shark hose part 113FFJ. The light, durable hose fits models NV350, NV351, NV352.
  • 【NO SPECIAL TOOLS NEEDED TO INSTALL THE HOSE】: Anyone will be able to install this vacuum hose. It snaps on in seconds without any special tools..
  • 【SUCTION POWER THAT IS BETTER THAN THE ORIGINAL】: What good is a vacuum if it doesn’t have good suction power? It’s useless! This Shark vacuum hose replacement has outstanding suction power. In fact, most users report that it works better than their original hose..
  • 【Deeper & More Effective】: Our products have the ability to bring you a better cleaning experience. Our shark vacuum cleaner hose accessories can be used in a variety of scenes, including: floor, carpet, sofa, bed, corner, etc. Say goodbye to dust and dander, clean better and faster!.
Check Stock

Festool 574930 CT 26 E HEPA Dust Extractor

  • Constantly high suction because of the compact high performance turbine.
  • Smooth suction hose and optimized sys-dock with cord holder and t-loc function for conveniently connecting Systainer to the mobile dust extractor.
  • Economical because of the optimal use of the available volume with a selfclean filter bag in the container.
  • Maximum utilization of the container volume – the gross volume is the same as the Net volume.
  • Can be individually Retrofitted with an additional compressed air or Bluetooth Module for remote control on the suction hose or automatic start via the Bluetooth battery pack.Anti-static 11-1/2 foot hose.
Check Stock

LUMAX LX-1336 Red Plastic Bucket Pump with Flex Hose and Non-Drip Nozzle. 5-6.5 Gallon (20-25 L) Capacity. Self-Priming, Push-Down Action Pump. Discharge Capacity: 3 Fluid Ounces per Stroke.

  • Push-down action pump that fits 5 gallon pails.
  • Precision buna-n seal that eliminates by-pass.
  • 50 inches flex hose has non-drip nouncezle.
  • 3 fluid ounce per strokeDescriptionThe plastic bucket pump with flex hose and non-drip nozzle is a plastic bucket pump with zinc-plated steel tube for transferring non-corrosive fluids of light to medium viscosity like, engine oil, gear oils, transmission fluid, automotive additives, machine oil, etc. It is a self priming, push-down action pump that fits 5 gallon pails, has a drain-back nozzle that prevents spills and accidents, a precision buna-n seal that eliminates by-pass, a nylon piston for durability, and a zinc plated, corrosion-resistant suction tube. It includes a 50 inches oil-resistant flex hose with non-drip nozzle, has a 1 inches inlet port, and a 1/4 inches outlet port. The discharge capacity is 3 ounce per stroke..
Check Stock