Reviews Oil Pump Gear

2400-2800PSI Pressure Washer Replacement Pump, 3/4\ Shaft Horizontal Pressure Pump Replacement Power Washer Pump Universal Pumps for Power Washer

  • ✔[RESTART YOUR PRESSURE WASHER]: Vertical Pressure Washer Pump 7/8" Shaft MAX 3100 PSI / 2.5 GPM / @3400 RPM, refurbish your pressure cleaner by replacing it with a new pump for up to 150 hours. Top performance at 2800-3000 PSI and replacement for most Rear Outlet 180-196cc at 6.5-7hp engine RYOBI, Honda, Briggs and Stratton, Subaru, PowerStroke, Craftsman, Simpson, Homelite and Many other brand..
  • ✔[EXTENDED SERVICE TIME]: High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, We promise the pump get 200 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in by pass mode. ⚠ But will not fit 3/4" shaft engine pressure washer. If you're not sure, please keep intouch with us!.
  • ✔[EASY JOB]: Built-in for simple & quick cold starts to make the startup a breeze. no need to release pressure before starting engine. Easy set up in 5-10 minutes with Key. At the same time, we come with 3 special test matched nozzles(0°/25°/soap) to help you get the best cleaning solution. Please follow the instructions to help your machine renew working quickly..
  • ✔[NO MAINTENANCE ]: Our pressure washer pump already have pre-filled oil and dou....
Check Stock

4HP Outboard Motor Boat Engine, 4 Stroke Heavy Duty Outboard Motor Fishing Boat Engine with Water Cooling System (4-Stroke 4HP)

  • ①4 STROKE 4 HP OUTBOARD MOTOR ENGINE:The JET PUMP 4HP 4 Stroke Outboard Motor Boat Engine provides all the power you need for motoring in a small craft. This engine does that as well as providing fuel efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport!.
  • ②DETAILS: Model: 4.0 horsepower jet pump.
  • Refueling method: No. 92 unleaded gasoline is recommended..
  • ③SIZE INFORS: Packing volume: 95*42*29cm/37.4*16.5*11.4inch.
  • Gross weight/net weight: 13(28.66lb)/9.7kg(21.3lb).
  • Recommended engine oil: four-stroke engine oil.
  • ④ATTENTION:Use four-stroke special engine oil (automobile and motorcycle engine oil).
  • Add oil according to the scale indication on the oil dipstick (the rotating cover),do not add more or less.
  • The fuel tank of the four-stroke outboard engine can only be filled with....
Check Stock

EWK 6.5L Manual Oil Extractor Pump Vacuum Oil Changer for Automobile Fluids Evacuation

  • 【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
  • 【 Easy Operation 】 The manual fluid evacuator requires no other equipment to use with. With a good number of strokes on the sturdy handle, the pump will create vacuum that triggers a powerful suction to help you change oil efficiently..
  • 【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
  • 【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
Check Stock

EWK Patented 10.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation

  • 【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
  • 【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.).
  • 【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
  • 【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistanc....
Check Stock

Jackma555 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation + Brake Bleeder Hose

  • 【 Work Freely 】 Not limited to places, change oil anytime and anywhere! With the Oil Extractor Pump, you no longer have to lift or crawl under the car to do fluid changing, and there is no mess to clean afterward..
  • 【 2 Operating Modes 】 The fluid evacuator equips with pneumatic and manual mode to fit any condition. The pneumatic mode turns the oil transfer pump into a high-speed oil changer while the manual mode requires no other equipment to use..
  • 【 Speedy Extraction 】 Fast suction and extraction speed of 1.8L /min. The oil changer extracts engine oil in a 4 cylinder car within minutes at pneumatic mode and leaves no mess to clean afterward..
  • 【Wide Application 】 Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable on cars, lawn mowers, boats, jet skis and etc. It is perfect for working on cars in the garage or automobile repair shops..
  • 【 Note】Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor. If there is any problemor concern with our products, please contact us for assistance..
Check Stock

Plews LubriMatic 55-005 Marine Lower Unit Hand Pump for Standard Neck Quart Bottles - 4cc Per Stroke

  • INDUSTRIAL GRADE: Our LubriMatic 55-001 Fluid & Oil Transfer Pump is a simple and effective solution for adding fluids to small engines, automotive transmissions and axles, farm equipment, industrial equipment, and marine lower units.
  • Ideal for adding oil and other fluids, such as antifreeze, fuel, steering fluid, or gear lube, to small engines and marine lower units.
  • LEAK-FREE FLUID TRANSFER: Avoid messy spills and the hassle transferring fluids.
  • The Lubrimatic 55-001 threads securely onto quart sized bottles and containers with traditional sized necks as commonly used for motor oil, ATF, and gear lube.
  • Not compatible with bottles that have oversize or wide-mouth necks.
  • RIGID INLET TUBES: Make kinks a thing of the past! The stiff, rigid construction of the inlet tubes ensures that no clogs or obstructions will keep your fluids from pouring smoothly.
  • Inlet tubes won't curl like flexible tubes, ensuring a more complete fluid transfer.
  • FLEXIBLE HOSE: Includes a 17 inch long, 3/8 inch diameter flexible outlet hose to allow easy access to hard to reach fill plugs and tubes.
  • QUALITY YOU CAN TRUST: For over 40 years, LubriMatic has been developing and distributing superior lubrication equipment, and we are proud to supply e....
Check Stock

TurboWerx Ultra High-Performance Turbo Oil Electric Scavenge Pump 12V

  • 350F (175C) Fluid Temperature, 2-3GPM Scavenge Pump Rate depending on oil temperature/viscosity, 50+ PSI continuous as Pressure Pump , Hardened Bronze Gear Pump Rotors.
  • 10,000 Hour Rated Dual Hybrid Ball Bearings, 10,000 Hour Rated Over-sized Brushes.
  • Highest Rated Temperature (class H or higher) Insulated Copper Motor Windings, Set of two 3/8” NPT -> AN Nickel-plated Adapters Included - Options are -6AN, -8AN, or -10AN Sizes - if size preference not specified at order time, -8AN supplied..
  • Warrant void if 350F (175C) rated temperature is exceeded, For 100% compatibility with 16-18V set-ups on race vehicles, choose the 24V Exa-Pump.
Check Stock

Lincoln 1335 Heavy-Duty Lever-Action Fluid Transfer Pump for 16- to 55- Gallon Drums 8.5 Fl Oz Per Stroke Adjustable Two-Position Handle for Pumping Low- to High-Viscosity Fluids

  • VERSATILE - The 1335 fits 16- to 55-gallon (60- to 205-liter) drums and includes a telescopic suction tube..
  • PERFECT FOR MULTIPLE FLUIDS - The pump is compatible with the following fluids - motor oil, transmission fluid, gear oil, fuel oils, engine coolant, diesel, kerosene and hydraulic oil..
  • STANDARDIZED - This lever-action pump fits all standard 2-inch bung openings and includes an integrated bung opening tool in the pump head..
  • CONSTANT PRIME - The internal check valve assures constant prime..
  • HEAVY-DUTY CONSTRUCTION - The steel construction includes brass rings for proven durability and expanded fluid compatibility..
Check Stock

Multi-Purpose Siphon Transfer Pump Kit, with Dipstick Tube | Fluid Fuel Extractor Suction Tool for Oil, Gasoline, Water, Liquids & Air

  • PUMPS A VARIETY OF FLUIDS - For use with non-corrosive fluids, automotive, agricultural and industrial fluids such as motor oil, transmission fluid, gear oil, engine coolant, silicone oils, and more (not suitable for gasoline)..
  • FITS STANDARD DRUMS - Two-tier threaded bung fits standard 2-inch and 1.5-inch metal and plastic drums.
  • IMPRESSIVE OUTPUT - The 1340 lever-action pump produces 14 oz. per stroke..
  • NO DRIPPING - The outlet discharge spout has a built-in aluminum die cast non-drip attachment and can be removed to allow attachment of a garden hose..
  • DURABLE DESIGN - Premium powder-coated steel pump body with an aluminum die cast pump head for durability..
Check Stock