Reviews Oil Line Fitting

beduan Water Oil Separator Filter 1/4 NPT Male and Female Thread Spray Gun Filters Air Line Compressor Fitting （Pack of 2）

  • Material : Aluminum Alloy ,Plastic. Rust-proof aluminum housing and brass fittings provide additional tool durability..
  • Max operating air pressure is 90 psi（0.62mPA）..
  • Size : Universal 1/4" NPT Inlet and Outlet Thread. Can be connected with spray paint gun, air line fitting, pneumatic tools..
  • Eliminate water, oil, moisture, dust and particulates in the spray gun filter, air compressor line, ensure the dry gas, effectively extend the life of....
  • Clear polycarbonate housing allows you to monitor amount of dirt and debris is being caught to know when to change the filter. Press of the release....
Check Stock

8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black

  • 8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black.
  • Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi. AN-8 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances..
  • Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
  • The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
  • PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant..
  • Package Includes: 1 x 8AN 20FT Nylon Braided Hose. It can't be bend and folding in half. Professional Installer is Highly Recommended. Exchange or return for free if leak..
Check Stock

Little Giant 566729 7365 GPH Wet Rotor Pump with 40-Ft. Cord for ponds up to 7300 Gallons, Black, F70-7300

  • APPLICATIONS: wet rotor pump construction without mechanical seal or oil is ideal for ponds up to 2700 gallons.
  • 2 PRE-SCREENS INCLUDED: removable fastener holds screen in place, modular design allows for single or multiple pre-screens.
  • VERSATILE: can be positioned vertically or horizontally.
  • accepts 2-inch threaded fitting or rubber coupling.
  • SAFE FOR FISH: oil-free design for maximum safety for all pond life.
  • SPECIFICATIONS: 5.5 Amps, 660 Watts, 40-ft. cord, 2-inch MNPT and SPIG discharge and inlet, maximum 7365 GPH at 0', 28-ft. shut-off, comes with rope/cable loop.
Check Stock

Little Giant F50-5000 5020 GPH Wet Rotor Pump with 20-Ft. Cord for ponds up to 5000 Gallons, Black, 566728

  • APPLICATIONS: wet rotor pump construction without mechanical seal or oil is ideal for ponds up to 5000 gallons.
  • 2 PRE-SCREENS INCLUDED: removable fastener holds screen in place, modular design allows for single or multiple pre-screens.
  • VERSATILE: can be positioned vertically or horizontally.
  • accepts 2-inch threaded fitting or rubber coupling.
  • SAFE FOR FISH: oil-free design for maximum safety for all pond life.
  • SPECIFICATIONS: 3.6 Amps, 413 Watts, 20-ft. cord, 2-inch MNPT and SPIG discharge and inlet, maximum 5020 GPH at 0', 28.5-ft. shut-off, comes with rope/cable loop.
Check Stock

Oatey 43791 PVC Saddle Tee Kit, 4-Inch x 2-Inch,White

  • The product is highly durable and easy to use.
  • For tapping into a 3-Inch or 4-Inch Sch. 40 DWV line.
  • Saddle is solvent welded to the existing line and secured with metal V-bolts, washers and nuts provided in the kit.
  • The tee accepts the incoming line inside the socket, or joins with a Sch. 40 DWV fitting.
Check Stock

Certified Appliance Accessories Ice Maker Water Line, 6 Feet, PVC Core with Premium Braided Stainless Steel

  • ✔COMPATIBILITY: Compatible with water filter system or reverse osmosis with 1/4" or 3/8" plastic water line. Fits for iSpring, APEC Water Systems, Whirlpool, Express Water Reverse osmosis system, And Frizzlife MP99, Culligan, Brondell, Aquasana Water filtration system..
  • ✔MULTI-USAGE: Provides pure water from your RO system or water filtration system to your ice makers, refrigerators, water coolers, fridge dispensers and more. The T fitting allows the system to function for both application with no loss in performance..
  • ✔COMPLETE ICE MAKER WATER LINE KIT: 20feet NSF certified 1/4" tubing, TWO set compression fitting nut, 1/4" Tee fitting and 3/8" Tee fitting allow you to connect to both 1/4" and 3/8" water line water purifier system or RO system..
  • ✔TOOL-FREE INSTALLATION: Push-in quick connect fittings offer easy DIY installation with no tools required..
  • ✔HIGH QUALITY COMPONENTS & 100% SATISFACTION: Superior high strength quick connect fittings and adapters ensure long lasting and a guaranteed leak free experience..
Check Stock

Glarks 156Pcs Metric & SAE Straight and 45 Degree and 90 Degree Hydraulic Grease Brass Zerk Grease Nipple Fitting with 60Pcs M6 M10 Caps Assortment Kit

  • ☀ [What You Get]: This kit includes 12 sizes of Metric and SAE grease fittings, M6 x 1 straight for 10pcs, M6 x 1 90-degree for 7pcs, M6 x 1 45-degree for 7pcs, M10 x 1 90-degree for 10pcs, M10 x 1 45-degree for 7pcs. 1/8''-27 straight for 10pcs, 1/8''-27 45 degree for 7pcs, 1/8''-27 90 degree for 7pcs, 1/4''-28 straight for 10pcs, 1/4''-28 45 degree for 7pcs, 1/4''-28 90 degree for 7pcs. Red(M6) caps for 30pcs, black (M10) caps for 30pcs. Total 156pcs which are sorted packed in a plastic box..
  • ☀ [Premium Material]: Grease fittings are made of high-quality brass. Not only the surface is clean and shiny, but also anti-corrosion and anti-rust. They can work for a long time, use them to replace damage zerk fittings, and you will no longer have to worry fitting loss or damage..
  • ☀ [Strong Tightness]: The thread on the grease fittings is clean, tidy and deep, which can ensure that fitting is tightly engaged with grease lines, and prevent the fitting from fulling off or oil leaking form the side..
  • ☀ [Grease Fitting Cap]: Red (m6), black (m10) caps are included in the kit, different colors are convenient for you to distinguish. They can prevent dust, dirt and other pollutants from entering the nozzle, thereby extending the life of the grease fittin....
Check Stock

3/8 6AN 20FT Fuel Line Hose Kit, Nylon Stainless Steel Braided Fuel Line Oil/Gas/Fuel Hose End Fitting Hose with 10PCS Swivel Fuel Hose Fitting Adapter Kit - Black

  • Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications..
  • Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes..
  • Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
  • The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
  • Safety Features For Your Protection: Fuel Hose: Size(ID): 6AN, Length: 20FT, Working Temperature: -100℉ to 500℉ (-73°C to + 260°C) , Pressure Tolerance: 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance..
  • Package Includes: 1 x 6AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak..
Check Stock

Keg Kit with 5 Gallon Ball Lock Keg, 5 lb Aluminum CO2 Cylinder, Regulator, and All Accessories

  • ...his 15 feet hose, this pretty long homebrew gas line can be cut into multiple sections to meet your mutiple kegging needs perfectly..
  • Can be Easily Cut by Cutting Tool: the short length brewing hose kit can not be cut and it can not be applied to your multiple keg dispensing process simultaneously, or the fixed hose fitting kit comes with extra fittings and you need to spend extra money, this 15 feet gas line can be cut into any length to meet your needs, you can can equip it with your own brewing dispensing parts, brings great convenience and creative possibilities for your multi-kegging brewing dispensing system..
  • Powerful No Leaking Pressure Transferring Tubing: the inside diameter of this great long kegging dispensing hose is 7mm, thick enough hose wall prevents the gas tubing kinks and maintains hose shape stability, smoothly transmit gas without leakage with the help of hose clamps. you can attach this kegerator hose to the beer barb fitting connector that has an outside diameter of 5/16'' to transfer your brewing gas to your beer keg..
  • Great Versatility and Widely Used: MRbrew 15 feet gas hose can withstand the co2 gas pressure value that can be up to 70 psi, you can attach this hose to ball lock quick disconnect fittings to transfer brewing gas ....
Check Stock