Reviews Oil Field Drilling

Oregon 562407 Economic Combi-Can 5+3 litres Red

  • 2 Spout 3" straight spout with copper nozzle 10"long flexible spout which can be bend easily and orient-able hold the position perfectly. This makes....
  • Metal Black hand pump oil can is made of high quality steel, durable, wear resistant. Epoxy finished surface is rust-proof and easy to clean..
  • 10 oz oiler can is perfect for one handed operation, especially in tight spaces. Easy to store and carry. It’s widely used in lubricating field,....
  • Oil can pump with a heavy-duty precision piston, over-sized handle and easy thumb pump trigger, easy to use. High volume of fluid is delivered with....
  • Pump oil can the new seal structure, increase 35% pressure, increase 25% oil rate, prolong the lifetime to two times..
Check Stock

uxcell Thread Milling Threading Tap M2 x 0.4, Metric Left Hand Machine HSS (High Speed Steel) Uncoated 3 Straight Flutes Screw Tap H2 Tolerance

  • Tap Size: 8-32 UNC thread, 2B thread tolerance grade. Straight flute design, downward chip removal, fast tapping with accuracy. High hardness and toughness for wear resistance..
  • M42 High Speed Steel: M42 is a high-speed steel alloy with 8% or 10% cobalt, with superior red hardness than conventional high-speed steels. M42 is less prone to chipping when used for interrupted cuts and costs less than the same tools made of carbide..
  • Applications: Suitable for processing through holes or shallow blind holes . Perfect for drilling and tapping materials below HRC30, such as alloy steel, cast iron, stainless steel, brass, aluminum, etc...
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is easy to cause breakage to the tap, so it is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use..
Check Stock

EDOG Springfield Armory M1A Rifel Schematic (Exploded View) Heavy Duty Rifle Cleaning 12”x36” Padded Gun-Work Surface Protector Mat Solvent & Oil Resistant

  • EDOG CERUS GEAR SPRINGFIELD ARMORY M1A RIFLE (EXPLODED VIEW) SCHEMATIC CLEANING MAT WITH 4 PC FIELD AND BENCH CLEANING ESSENTIALS KIT.
  • 12" x 36" ORIGINAL EDOG CERUS PROMAT| PROTECT YOUR FIREARM AND WORK SURFACE | NON – SLIP BASE | SOLVENT & OIL RESISTANT | ROLLS UP FOR EASY STORAGE | HAND WASHABLE -.
  • MAT IS SOLVENT & OIL RESISTANT | HAND WASHABLE WITH NON FADE IMPRINT | ROLLS UP FOR EASY STORAGE | SPACIOUS & LIGHTWEIGHT.
  • OUR EXPLODED VIEW SCHEMATIC PROMAT ALLOWS YOU VISUALIOZE THE SOMETIMES TRICKY WORLD OF FIELD STRIPPING YOUR WEAPON. JUST CONFIDENT, SIMPLE, DIAGRAM TO HELP YOU GET THE JOB DONE.
  • BE THE ENVY AT THE RANGE AND PAIR YOUR WEAPON WITH THE EXPLODED VIEW SCHEMATIC PROMAT , HAVE CONFIDENCE IN CLEANING YOUR RIFLE, LEARNING YOUR WEAPON’S DESIGN WILL BE A BREEZE. PROUDLY MADE & DESIGNED BY & FOR SHOOTERS IN THE USA.
Check Stock

Matework M35 Cobalt Step Drill Bit Four Spiral Flute Step Bit 1/4 -1-3/8 Wear-Resistant TiAlN Coated 3/8 Hex Shank Unibit for Metal Wood Stainless Steel Plastic 19 Size

  • FOUR FLUTE STEP DRILL BIT - Ordinary step drills are prone to deflection during cutting, but four Flute step drill are more stable in cutting. The service life is twice as long as that of ordinary step drills, the drilling accuracy is significantly improved, and the cutting speed is faster when drilling, which has a unique effect on stainless steel drilling..
  • M35 COBALT HSS - M35 cobalt HSS can obtain high hardness (HRC 64-66), high red hardness and high wear resistance through proper heat treatment. Its toughness and bending strength are higher than ordinary high-speed steel, and it is better for hard materials..
  • TiAlN COATING - As a new coating material in the past two years, TiAlN coating has excellent characteristics such as high hardness, high oxidation temperature, good thermal hardness, strong adhesion, small friction coefficient, and low thermal conductivity..
  • 135°CUTTING ANGLE - The increased angle of the drill tip is more suitable for drilling hard materials than 118°. The larger the included angle, the smaller the self-wear and the larger the stress area..
  • TIPS - Due to high-speed rotation, the temperature of the drill bit will continue to rise. It is recommended to add cutting oil or spray water to cool down when working continuously, which....
Check Stock

Vortex Optics Razor Red Dot Sight - 3 MOA Dot

  • The Razor Red Dot Sight-3 MOA is designed to be mounted to a wide variety of firearms and used in various shooting applications. The Razor was....
  • A premium wide field lens gives the shooter an impressive field of view. The daylight bright red dot has nine illumination levels allowing shooters to....
  • Anti-reflective XR coatings on the lenses increase light transmission for maximum brightness while Armortek coatings protect the lenses from oil and....
  • O-ring sealed and a rugged one piece chasis constructed from aircraft grade aluminum ensure waterproof and shockproof performance..
  • The Razor runs off a single CR2032 battery which can be easily switched in and out..
Check Stock

uxcell Thread Milling Tap 8-32 UNC, M42 HSS (High Speed Steel) Uncoated 3 Straight Flutes Machine Screw Threading Tap 2B Tolerance Grade

  • ...removal, fast tapping with accuracy. Titanium coating can improve wear resistance, corrosion resistance and rust protection..
  • Applications: Suitable for processing through holes or shallow blind holes. Perfect for tapping stainless steel, copper, aluminum, etc.. Micro taps are mainly used for watches and clocks, and drilling materials in low hardness, such as wood, plastic and soft metals..
  • Cobalt High Speed Steel Tool: High speed steel (HSS) tool with cobalt has higher hardness and precision, better wear resistance and toughness, higher heat resistance. It is made by adding 5%-8% cobalt to the general-purpose high-speed steel..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Recommended feed rate: General steel: 6-15m/min.
Check Stock

Arctic Cat C-Tech 2 Oil - 1 Gallon

  • Genuine Arctic Cat Product, OEM Part Number: 7639-840.
  • The new C-TEC2 revolutionary clean-burning engine technology demanded an entirely new oil formulation. This new lubrication system effectively delivers oil where it is required as a result using.
  • Reduction in recoil pull-effort during cold weather starting. New, convenient C-TEC2 oil packaging provides easier pourability and less waste. Fully synthetic formulation provides ultimate engine.
  • Detergent additives maximize Arctic Power Valve and engine cleanliness. Smokeless formulation burns extremely clean with a fresher scent..
  • Arctic Cat lubricants are designed and developed in conjunction with our engines and are proven through thousands of hours of dyno and field testing. They deliver the ultimate performance and.
Check Stock

Matework M35 Cobalt Step Drill Bit Set Four Spiral Flute Step Bit 1/8 -7/8 Wear-Resistant TiAlN Coated 1/4 Hex Shank Unibit for Metal Wood Stainless Steel Plastic 3Pcs 20 Size

  • FOUR FLUTE STEP DRILL BIT - Ordinary step drills are prone to deflection during cutting, but four Flute step drill are more stable in cutting. The service life is twice as long as that of ordinary step drills, the drilling accuracy is significantly improved, and the cutting speed is faster when drilling, which has a unique effect on stainless steel drilling..
  • M35 COBALT HSS - M35 cobalt HSS can obtain high hardness (HRC 64-66), high red hardness and high wear resistance through proper heat treatment. Its toughness and bending strength are higher than ordinary high-speed steel, and it is better for hard materials..
  • TiAlN COATING - As a new coating material in the past two years, TiAlN coating has excellent characteristics such as high hardness, high oxidation temperature, good thermal hardness, strong adhesion, small friction coefficient, and low thermal conductivity..
  • 135°CUTTING ANGLE - The increased angle of the drill tip is more suitable for drilling hard materials than 118°. The larger the included angle, the smaller the self-wear and the larger the stress area..
  • TIPS - Due to high-speed rotation, the temperature of the drill bit will continue to rise. It is recommended to add cutting oil or spray water to cool down when working continuously, which....
Check Stock

ZEKOO Gate Hinges (Black and White) Use for Vinyl and PVC Fences (Black)

  • 【Main Material & Surface】Stainless steel，electrostatic powder spraying process, stainless steel, corrosion protection, environmental protection, non-pollution..
  • 【Fit For】Use for heavy duty door, total have 14 screws, that add extra strength to an installation due to the additional fixing points.The maximum support weight of 1 set hinge is approximately 130 lbs..
  • 【product】With the Self-drilling Screws,use for Vinyl Gate, if your door is wooden, you will need to buy wood screws separately, we have the install instruction, easy to install.
  • 【Service】5 years warranty, 100% money back guarantee, 24 hours online customer service, if any part missed or broken, we will ship out from U.S warehouse ASAP. Any problem in using it, our professional staff in latch field will answer questions for you..
Check Stock