Reviews Oil Extractor Pump 2

Jackma555 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation + Brake Bleeder Hose

  • 【 Work Freely 】 Not limited to places, change oil anytime and anywhere! With the Oil Extractor Pump, you no longer have to lift or crawl under the car to do fluid changing, and there is no mess to clean afterward..
  • 【 2 Operating Modes 】 The fluid evacuator equips with pneumatic and manual mode to fit any condition. The pneumatic mode turns the oil transfer pump into a high-speed oil changer while the manual mode requires no other equipment to use..
  • 【 Speedy Extraction 】 Fast suction and extraction speed of 1.8L /min. The oil changer extracts engine oil in a 4 cylinder car within minutes at pneumatic mode and leaves no mess to clean afterward..
  • 【Wide Application 】 Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable on cars, lawn mowers, boats, jet skis and etc. It is perfect for working on cars in the garage or automobile repair shops..
  • 【 Note】Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor. If there is any problemor concern with our products, please contact us for assistance..
Check Stock

GPI - L5132 High Viscosity Oil Pump, 32 QPM, 230AC/115V Oil Transfer Pump for Viscous Fluids That Features a 0.75” Ball Valve Nozzle, 8 Foot Hose, 3 Foot Power Cord with Three-Prong Plug (142100-02)

  • DURABLE ALUMINUM HOUSING: Our gear oil transfer pump is for high viscosity fluids and lubricants. Engineered with the lightweight cast aluminum housing and gerotor gear design, our oil extractor pump ensures long life and minimal maintenance. With the rugged 230/115-volt AC motor, our oil pump delivers a flow rate of 8 GPM or 32 QPM (30L/min)..
  • HEAVY-DUTY OIL PUMP: The L5132 is specially designed for use with new oil (up to 90 wt), waste oil, hydraulic fluid, antifreeze, or other non-flammable oil-based solvents. Our high viscosity pump is highly productive when used to pump drums, bulk tanks, waste oil reserves, and other oil containers. Modeled to fit easily to a barrel or drum, this oil extractor quickly transfers all incombustible liquids!.
  • EXTENDED MOTOR LIFE: The smart thermal protection design extends the motor life of our heavy-duty oil pump with the versatility to handle a variety of fluids without the risk of overheating. The weight centering inlet base of the pump reduces the tank stress and the pressure relief valve offers the easy strainer access..
  • EASY-TO-USE: Accompanied by a pre-installed 3 foot power cord with a three-prong grounded NEMA plug, this oil pump greatly reduces assembly and installation time. The pump includes an 8 foot long....
Check Stock

TuhooMall Fluid Extractor Syringe Pump,200cc Fluid Extractor,Fluid Extraction and Fill Pump,200cc Fluid Extractor Filling Syringe Pump Manual Suction Vacuum Fuel Car Automotive Transfer

  • Fluid Extractor and Filler:Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
  • Lock Design: 200cc extraction and fill pump,just push the hose into the end of the pump and it is locked into place automatically. So you never have to worry about it pulling off or blowing off when you use the pump to fill things..
  • Include:The extraction and fill pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose..
  • Easy to Use: 200cc fluid extractor syringe pump designed for leak-free extraction of a variety of caustic mechanical liquids. Includes extension syringe hose for easy extraction through filler necks and reservoirs. And it disassembles for easy cleaning and maintenance..
  • Application:This 200CC/200ML/0.21QT/7OZ fluid extractor syringe vacuum pump is designed to be chemical and oil resistant. Ideal for extracting or changing engine oils or fluids in automobiles, boats, farm equipment, industrial gear boxes, motor vehicles, motor bikes, RV's,lawn mowers, golf carts and more..
Check Stock

Trac Outdoors Hand Held Fluid Extractor - Ideal for Nearly All Forms of Fluid Extraction - Includes Cap, Adapters and Hoses (69360)

  • 【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
  • 【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.).
  • 【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
  • 【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistanc....
Check Stock

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

  • Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
  • 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
  • Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
  • Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
  • Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
Check Stock

EONLION Oil Change Vacuum Fluid Extractor 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Oil Transmission Coolant Change Tool Easy-to-Use Hand Pump Extract Fluid Through Dipstick Tubes

  • 【 Speedy Extraction 】 Fast suction and extraction speed of 1.8L /min. The oil changer extracts engine oil in a 4 cylinder car within minutes at....
  • 【 2 Options Usage 】 Fluid evacuator equips with pneumatic and manual mode to fit any condition. The pneumatic mode turns the pump into a....
  • 【No Oil LEFT】Vacuum Fluid Extractor comes with 4 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be....
  • 【 Plus Version 】 Upgraded accessories, upgraded convenience. This fluid extractor comes with storage unit for collecting hoses when not in use,....
  • 【 Work Freely 】 Not limited to places, change oil anytime and anywhere! Perfectly extracts most fluid types: engine oil, transmission fluid, gear....
Check Stock

6.0 Liter Brake Pump Pneumatic Fluid Oil Extractor Stainless Steel Oil Change Vacuum Fluid Extractor Pump for Any Vehicle Fluid Change Tool No Leaks Oil Extractor Pump

  • Work Freely and Widely -- Extract the engine oil, Brake fluid, ATF fluid and other non-corrosive and non-thick fluid of motorcycles and vehicles. Not....
  • Easy to Operate: The pneumatic way for higher speed of oil change.
  • just need to connect with air compressor. Easy to do the oil / fluid changing for....
  • Vehicle Fluid Removal Tool: At 6 liters of capacity, this fluid-extractor pump can be used for oil and fluid changes on most light and heavy duty....
  • Brake Bleeding Hose-- Makes your oil extractor multi-functional. One new brake oil silicon hose 4x8mm X 2 Meter (78.7 inch) with check valve to avoid....
  • Included components: Fluid Extractor 60" (1.5M) PVC Steel Braided Suction Hose 3/8" (9.5mm) x 17" (430mm) Dipstick Tube, 3/8" (9.5mm) x 30" (750mm)....
Check Stock

EWK Patented 15L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation

  • TRANSFER FLUID SMOOTHLY - Thorstone syringe style fluid evacuator comes with 1/4" and 3/8" extension tubes each at 8.6 inches long, reaching hard-to-reach locations for extracting and changing transmission fluid, power steering fluid, gear oil, anti-freeze and brake fluid..
  • LEAK FREE FLUID EXTRACTOR - The Locking botton helps you to operate safely. This hand pressure fluid extractor and injector features a dual rubber ring design that forms an air tight seal, the precision threading at the end of tube prevents leakage..
  • EFFICIENT LIQUID REMOVAL - The extracting & filling vacuum fluid pump is designed to be chemical and oil resistant. Removes mechanical liluids on ATVs, automobiles, boats, cars, trucks, RVs, lawn mowers, golf carts and other vehicles..
  • WHAT'S INSIDE - Auto oil syringe package includes 1 transparent fluid syringe with locking adapter, 2 clear tubes with end caps for brake fluid syringe pump attachment, and 1 non-drip silicon connector for your convenience..
  • 100% SALE SUPPORT - We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!.
Check Stock

Yamaha SBT-OILEX-TR-CT OIL EXTRACTOR 6L SBTOILEXTRCT

  • Yamaha HT Moto Fluid Extractor Pump Oil ATV PWC UTV SBT-OILEX-TR-CT.
Check Stock