Reviews Of Drill Pipe

ABN Exhaust Pipe Expander Tool - Tail Pipe Expander Exhaust Expander, Exhaust Pipe Stretcher Kit 1-5/18 to 4-1/4 Inch

  • [Increase Engine RPM]: Expanding your tailpipe with the ABN Exhaust Tube Expander Tailpipe Expander Kit to increase exhaust volume and to give you more power for your engine.
  • [Easy to Use]: Lubricate all parts of the exhaust pipe bender stretch tool and attach correct sleeve.
  • Insert pipe spread tool into pipe, connect to existing drill, and expand.
  • Pipe might need to be warmed during winter months to prevent damage while using exhaust flare tool.
  • [Expand Most Metals]: Tailpipe expander tool kit great for all types of pipes, from aluminum to stainless steel.
  • Exhaust pipe expanding tool can expand piping from 1-5/18 to 4-1/4 inches (3.3 to 10.8cm).
  • [Easy Storage]: HVAC pipe expander parts come in a plastic storage case to keep the steel and copper pipe expander kit organized.
  • [Contents]: Exhaust pipe expansion tool kit includes a 3/4-inch and 1/2-inch (1.9 and 1.3cm) shank collet expander chuck, 5 expander sleeves, and 2 packs of black rubber O ring replacements.
Check Stock

ARES 48001 – External Rotary Deburring & Chamfer Tool (13-36mm) – 3/8-Inch Shank for Use with Drill or Hex Driver - Clean and Repair Threaded Fasteners, Studs, and Bolts

  • 【Deburring Chamfer Tool】EZARC Deburring chamfer tool set includes debur tools covering external diameters of 1/8″-3/4″ (3-19mm) and internal diameters of 1/8″-5/8″ (3-16mm). Deburring chamfer tool set features quick release shank fits all handheld and stationary drills..
  • 【Exquisite Crafts】The internal countersink chamfer is made of M2 high-speed steel, and the surface is black nitrided after heat treatment. The head of the external deburring chamfer is cast with zinc alloy, and the surface is black and bright electrophoretic treatment. 3 pieces of YG8 carbide blades provide better performance and longevity than high speed steel blades..
  • 【Easy to work】Attaching the deburring external chamfer tool to the end of your power drill, Use the speed on the drill bit between 0-400 RPM, and then slightly applying pressure to remove the burr. Do not use impact mode..
  • 【Safety Design】The accurate deburring external chamfer tool easily shaves the outer rough edge of bolts, newly-cut pipes or rods, removing burrs to keep edges smooth. Quickly repairs damaged bolts and tightens the nuts in place without hurting your hand, no sparks, and no burns.
  • Simplifies the repair process. The internal deburring tool with 5 flute bit design allows it drilling....
Check Stock

scottchen PRO Inside Pipe Cutter 1-1/2\(36mm) Internal PVC Plastic Pipe Cutting Tool Diamond Cutting Blade-1set

  • 【Function】This inner pipe cutting tool excellent to cut the pipe from inside which normal pipe cutter hard to reach..
  • 【Size】The pipe cutter diamond cutting blade is 1-1/2” diameter, suitable for cutting 1-1/2” and above size pipe. The shank 4” length, can reach deeper place to do cutting project..
  • 【Appliance】This plumbing tool ideal for various pipe cutting, such as: PVC, HDPE, CPVC and ABS plastic etc, fast cutting without melting the pipe..
  • 【Guide wheel】The bottom guide wheel great for fast and stable pipe cutting, minimizes vibration during the work progress, form a perfect straight cutting edge appearance..
  • 【Installation】The internal PVC cutter easy to install (detail as image). The shaft with 1/4” hex head quick mount to hand power drill. NOTE: Must rotary Anti-clockwise. Before cutting, please put something in the pipe to prevent it from falling off..
Check Stock

04520 for PPRK5 Plastic Pipe Fitting Reamer 5 Piece Kit fit into standard 1/2\ drills PVC pipe reamer tool Contains PPR125, PPR150, PPR200, PPR300 and PPR400

  • ..., drain pipe and water pipe, and is used to clean residual pipes and solvent cement residues on PVC, CPVC or ABS fittings, Reduce labor time and materials costs by reusing the fittings..
  • 【Set combination】：Kit with PPR125, PPR150, PPR200, PPR300, PPR400 5 Piece, in ahard plastic case.Fits into standard 1/2 inch drill.Shaft Size: 3/8" hex..
  • 【Advantage】：Its carbide cutting insert provides a cutting edge on each side.Rotate before replacement and receive three bonus cutting edges.Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems..
  • 【Professional customization】: Specially designed for North American pipe diameters, So they as they fit specific ID/OD for reaming work.It is made of the latest hard alloy with high strength,high precision, durability and long service life. The surface is not easy to rust after coating treatment..
  • 【100% Satisfaction Guarantee】: Your satisfaction is our top priority, We strive to provide customers with quality services.If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty..
Check Stock

04529 for PPRK6 Plastic Pipe Fitting Reamer 6 Piece Kit fit into standard 1/2" drills PVC pipe reamer tool Contains PPR75, PPR100, PPR150, PPR200, PPR300 and PPR400

  • ...and is used to clean residual pipes and solvent cement residues on PVC, CPVC or ABS fittings, Reduce labor time and materials costs by reusing the fittings..
  • 【Set combination】：Kit with PPR75, PPR100, PPR150, PPR200, PPR300, PPR400, 6 Piece,Fits into standard 1/2 inch drill.Shaft Size: 3/8" hex..
  • 【Advantage】：Its carbide cutting insert provides a cutting edge on each side.Rotate before replacement and receive three bonus cutting edges.Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems..
  • 【Professional customization】: Specially designed for North American pipe diameters, So they as they fit specific ID/OD for reaming work.It is made of the latest hard alloy with high strength,high precision, durability and long service life. The surface is not easy to rust after coating treatment..
  • 【100% Satisfaction Guarantee】: Your satisfaction is our top priority, We strive to provide customers with quality services.If you're not 100% satis....
Check Stock

Saipe 5 Pcs Swaging Tool Drill Bit Set 1/4 Inch Hex Shank Copper Pipe Flaring Tool Tube Expander Air Conditioner Copper Pipe Swaging Flaring Tool for Copper Tubing 1/4 3/8 1/2 5/8 3/4

  • 【Swage Drill Bit Set】Size: 1/4'' (6.35mm), 3/8'' (9.5mm), 1/2'' (12.7mm), 5/8'' (15.9mm), 3/4'' (19mm). Total Length: 50/54/57/60/63mm. Shank....
  • 【Tube Expander】Suitable for【Tube Expander】Suitable for hard and soft copper standardized, easy to braze swaging set. Come with 5 different....
  • 【Durable For Use】Made of high quality bearing steel for high and uniform hardness and wear resistance. High elastic limit for good performance and....
  • 【Swaging Tool】When installing the air conditioner, use a pipe expander to widen the copper pipe, so that the two copper pipes can be accurately....
  • 【Easy to Use】Just need to install it on the electric hand drill to use. Flaring tool drill bit set are small in size, so you can take it with you....
Check Stock

OXMUL Step Drill Bits for Metal, 3/16 to 7/8, M2 HSS, Duty for Stainless Steel, Mild Steel, Hard Metal, Aluminum, Wood, Copper, PVC, 12-Steps. 2-Spiral-Flute. #201

  • [M2 HSS Coated] Made of M2-Coated HSS, this stepped Drill Bit have 5X Longer Life of Regular Drill Bit. This Step Bit drill 2X Faster for Stainless Steel, Hard Metal, Mild Steel, Galvanized Steel, Aluminum,Iron, Wood Plate, PVC and Copper. If you want to drill faster and many holes on metal, then please choose this step drill bit.
  • [Duty for Stainless Steel] A test. Drill in 1.3mm thick Stainless Steel square pipe. This Step Drill bit successfully drilled 12 holes. But another Titanium Step Drill only drilled 1 holes, then blunt.
  • [12 Steps & 2-Spiral Flute] Drills 12 different hole sizes, from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral Flute:Clears Chips faster.
  • [118° Split Point Tip] Split Point tip prevents "walking," gets fast starts, and eliminates the need for pilot/starting hole.
  • [3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.
Check Stock

Kaka PN-1/2S Hole Saw Pipe tube Notcher

  • Make perfect joints for clean secure welds or make round cuts in pipe and tube of various shapes.
  • Use with your electric drill or drill press.
  • Include adjustable mounting bracket, to makes cutting compound notch angles easily.
  • Use with 1/2" chuck and Max. capacity 2".
  • Precision settings from 0 to 60 degrees in 1 degree increments.
Check Stock

Wheeler-Rex 2290 Internal Plastic Pipe Cutter 2-Inch Schedule 40 Pipe

  • Easily preset for depth of cut, they are installed in the pipe and make their cuts in seconds..
  • Recommended user supplied power source: 1/2-Inch capacity, 350-450 rpm drill, rated at 4.6 to 6-Amp.
Check Stock