Reviews Nylon tufnol Or All metal Hotend Upgrade

BCZAMD 3D Printing Upgrade Parts Ender 3 Direct Drive Extruder Conversion Kit Complete Set Requires No Firmware or Wiring Modification fit for Ender 3/ Pro/Ender 3X/ CR10 Series Printer Accessories

  • 1. Fits perfectly on your creality series printers, include Ender 3 Pro, Ender 3, Ender 5, CR10.
  • 2. Material: no 3d printed parts, all metal main plate, comes with a kit, so you need to assemble by yourself, install instruction, please reference....
  • 3.This kit is a great little light kit that moves your extruder from the side with a bowden line to the top of your hot end. It obviously adds the....
  • 4. Work well for most filament, expecial very good for flexible filaments, had no problem printing TPU with this setup..
  • 5. Compatible with most extruder hotend, but you need to print a printing before install on V6 hotend, please reference on thingiver..
Check Stock

Bilway 3D Printer Ender 3 v2 Printer Creality Ender 3 v2 3D Printer with Silent Mainboard Meanwell Power Glass Bed and Resume Printing 220x220x250mm Ideal for Beginners

  • 1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less....
  • 1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • 2 * PC4-M6 and PC4-M10 Pneumatic Fitting to secure PTFE in extruder and hotend..
  • 2 * MK8 hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more....
  • 2*0.4mm nozzles of non-stick silicone material Help to keep the hotend temperature extremely stable.【Note】If have any using problem. Please kindly....
Check Stock

Authentic Capricorn PTFE 1M Tubing and Upgraded Pneumatic Fittings PC4-M6 and PC4-M10 with Metal Teeth MK8 Hotend Silicone Sock and Replacement Nozzles Ender 3 / Pro CR-10 Series

  • Capricorn PTFE tubing is designed with tight tolerances to dramatically improve print quality.
  • The silicone sock included help maintain a stable hotend temperature for more consistent extrusion.
  • 4 pneumatic fittings with METAL TEETH for superior performance to brass fittings with plastic teeth.
  • Replacement hotend nozzles come in .2 .4 .6mm for fine detail or much faster larger part drafting.
  • F1RST LAYER is a proud distriubtor of ONLY official Creality and Capricorn parts and accessories.
Check Stock

Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing 1M， PTFE Teflon Tube Cutter, Pneumatic Fittings and MK8 Socks and Extra Nozzles for Ender 3/3 Pro/5/Vyper/Voxelab Aquila

  • 1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills..
  • 1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
  • 2 * PC4-M6 and PC4-M10 Pneumatic Fitting to secure PTFE in extruder and hotend..
  • 2 * MK8 hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more consistency..
  • 2*0.4mm nozzles of non-stick silicone material Help to keep the hotend temperature extremely stable.【Note】If have any using problem. Please kindly contact us(seller) via “ask a question” find us directly, cause our customer service will respond to you within 24 hours..
Check Stock

Creality 3D Capricorn Bowden PTFE Tubing 1 Meter Tube Cutter XS Series with 5 pcs Nozzles for 1.75mm Filament Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S 3D Printer

  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend..
  • Capricorn PTFE tubing ensures the highest quality prints at any given temperature. This XS series tubing is rated for high temperature printing, and also boasts greater lubricity leading to less friction, less slippage, and less wear. Great for flexible filaments! Also guaranteed with to have an inner diameter accurate to within 0.05mm, enabling fine tune retraction settings with more precision than ever before!.
  • The perfect replacement kit if the your stock hotend has failed or constantly jams.Capricorn tubing provides enhanced precision for retraction settings, meaning less stringing on prints once calibrated..
  • Comes with 1 Meter Tubing, five Brass nozzles and one cutter.
Check Stock

OutdoorMaster Ski Snowboard Tuning and Waxing Kit with Waxing Iron,Universal Wax,Edge Tuner,Brush,Wax Scraper,Ptex,Fixer Screw,Rubber Band (Black, XL-Upgrade)

  • [Cleaning Kit] We have a complete waxing kit, including cleaning tools, which contain sand paper (for polishing the edge), fibertex pad, metal scraper, wax scraper (230mm/9.06inch length), Nylon/Brass/Horsehair Brush and wax apron at work..
  • [Upgrade Edge Trimming and Frosting Combination] Compare with standard kit, this ski wax kits with extra 2 pcs sanding block 60 mesh & 4 pcs diamond polishing disc can make your skis/snowboards perfect! 4 PTEX (2 black and 2 clear), which can be used to repair the bottom plate.
  • 7/20cm (2.76/7.87inch) files, used to sharpen the edge, and Edge Tuner (86°/87°/88°/89°)for side edge, which can be accurate to 1° (86 /87/88/89 °)..
  • [3 Pieces of High-Quality Wax] We have waxes suitable for different temperatures to make skiing more fun.
  • blue: -25°C to -12°C or -13°F to 10°F.
  • Yellow: -6°C to +20°C or 22°F to 70°F..
  • [Ski Wax Iron] Snowboard waxing kit-Iron 110V/800W temperature adjustable, with thick soleplate, stable temperature. The adjustable temperature range is 100℃/ 212 F-170℃/338F..
  • [Storage Bag and Accessories] Snowboard and ski tuning kit–We are equipped with a waxing kit bag, which can put all tools, in addition, there are 2 ski brake retainers and snowboard b....
Check Stock

[Gulfcoast Robotics] V6 All Metal Hotend Black Edition w/Polished Titanium Heatbreak 12V Bowden

  • V6 All Metal Hotend features a maximum working temperature of up to 300° Celsius.
  • Pre-assembled and ready to install. Nozzle has been heat tightened for ease of use..
  • Polished Titanium Heatbreak has lower thermal conductivity, preventing clogs caused by heat creep..
  • EPCOS Thermistor uses fiberglass insulated leads for safe and secure high temperature 3D Printing..
Check Stock

BossBearing Rear Wheel Bearings and Seals Kit for Yamaha YFM660 Grizzly 2002

  • ...y schedules, especially between Thanksgiving and Christmas..
  • PLAY MORE & SPEND LESS: BossBearing has the replacement parts you need to keep your ATV, UTV, Dirt Bike, Street Bike and Snowmobile out of the garage and back in the action. Our kits save you money and time by giving you all the parts you need to repair or upgrade your ride at one place.
  • PEACE OF MIND: Every BossBearing product comes with a 1-year warranty that protects you after your purchase. We are confident that our products will work once installed in your vehicle. But in a rare case that it does not, we will replace it anytime within one year of your order. If you have a problem, we will take every step to assist you.
Check Stock

Official Creality Bowden Tube 1M, 3D Printer PTFE Tube Teflon Bowden Tubing Upgrades for 1.75mm Filament Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series (1M)

  • 【Best Performance】 Creality Bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend..
  • 【Compatible with More Filaments】 PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃..
  • 【Product Parameter】Teflon tube length: 1 Meter, Inner Diameter: 1.95mm ± 0.05mm , Outer Diameter: 2mm. The optimal inner diameter size is designed to reduce "wiggle room" or flex in the tube, allowing you to print flexible filaments even on the longest Bowden systems..
  • 【Highly Compatible】 Compatible with Creality 3D printer:Ender-3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender-5/Ender 5 Pro/Ender 5 Plus/ Ender-6/CR-10/CR-10S/CR-10 V2/CR-10 V3/CR-10 S4/CR-10 S5..
  • 【Technical Support】Creality pays great attention to the buyer’s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..
Check Stock