Reviews Ntc Temperature Sensor

Ametherm Ntc Thermistor - SL22 5R012

  • NTC thermistors are ethoxyline resin-enveloped thermistors in small size. Used for temperature measurement..
  • 10K Ohm thermistors are very useful in many applications, and they are light for use..
  • NTC (Negative Temperature Coefficient) thermistors, their resistance drops as temperature increases..
  • Have them in a circuit built to accommodate them, they will work very well and consistently..
  • Widely used for air condition equipments, heating apparatus, electric thermometers, liquid level sensors, etc..
Check Stock

KT99 Temperature Controller 120V 10A Digital Thermostat Regulator Switch Dual 1.5m Waterproof Probe for Heater Cooler Fahrenheit Display Aquarium

  • 【Two direct output】KT99 digital thermostat support two independent direct output, with 2pcs 1.5m NTC waterproof sensor can work with two independent equipment, with °F display..
  • 【Easy operation】KT99 Temperature controller control the load by setting the start and stop temperature. -58~248°F wide control range is good for both heater cooler..
  • 【Compressor delay time, alarm setting】 KT99 thermostat regulator can set the compressor delay time(0~5min) to make the cooler delay start. By setting high/low temperature alarm value to keep the home appliance, incubator, seeding pads, refrigerator ,reptiles, Aquarium, and other appliances safe..
  • 【Data storage and reset function.】 All parameters setting can be saved after short circuit and power off, and it also can be reset as requirement..
  • 【Temperature calibration】±1°F Control Accuracy with (-30~30°F) Temperature Calibration, can make the all process more accurate, keep the temperature in desired range..
Check Stock

DZS Elec Temperature Controller -50 to 110 Celsius (-58 to 230 F) DC 12V Programmable Heating/Cooling Thermostat Control Switch Module NTC Waterproof Sensor Probe Dual Color LED Display Monitor

  • Temperature controller monitoring instrument, show the measured temperature (red) and set temperature (blue) at the same time. Can be used for cooling/heating control. Operating Voltage: DC12V 200mA.
  • Measurement Range: -50 to 110 Celsius (-58 to 230 F), the C/F button allows you to switch between Celsius and Fahrenheit temperatures.
  • Clear Working State: the relay is closed when the light is on, and the relay is disconnected when the light is off. It has high temperature protection..
  • With a waterproof NTC (10K 0.5%) temperature sensor probe, rogrammable heating/cooling mode, delay start, high temperature alarm, Celsius/Fahrenheit mode, etc..
  • Can be used for fish tank water temperature control, incubation field, equipment cabinet, air conditioning system, temperature control protection, control cabinet cooling system and other DIY temperature control systems..
Check Stock

5-PCS Ender 3 Thermistor HT-NTC100K 3D Printer ntc 3950 100K Thermistor Sensor for Creality Ender 3 v2 Thermistor Upgrade Compatible with E3D V6 Volcano PT100 Ender-3-5 Pro CR10 hotend,

  • （Ender 3 Thermistor, Upgrade HT-NTC100K Thermistor (1 meter each)）：Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
  • Compatibility：Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
  • Stability and Accuracy：Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
  • Long Service Life：Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..
Check Stock

Icstation DC 12V Programmable Temperature Controller, Smart Home Incubator Aquarium Car Improvement Mini Digital Thermostat Regulator Switch Module Waterproof Sensor -58℉ to 230℉

  • 【Celsius & Fahrenheit Display】Programmable mini digital temperature control unit with -50℃ to 110℃ (-58℉ to 230℉) measuring range.
  • Thermostat regulator switch module has dual LED display the set temperature and current temperature, with waterproof NTC (10K 0.5%) temperature sensor probe, on-board tactile push button set the trigger temperature and alarming temperature.
  • 12V 1CH relay control the power on/off when the ambient temperature reach the set value, low power sumption <.
  • Easy installing and setting in 30 minutes, splotting size 46 X 26.5mm/1.81 X 1.04inch (L*W).
  • Power Supply: DC12V 200mA, Module Size: 48 X 29 X 32mm/1.89 X 1.14 X 1.26inch (L*W*H).
  • Cable Length: 30cm/12inch, Probe: 2cm/0.8inch.
  • Widely used at smart home, industrial control, automatic irrigation, indoor ventilation and protection equipment. Such as temperature control of production workshop, car or automobile, hatching aquaculture, tobacco industry, printing house, aquarium, fish tank, heater, cooling equipment, bedroom and so forth.
Check Stock

DIGITEN Wireless Thermostat Outlet, Temperature Controlled Outlet Heating & Cooling Remote Control and Plug-In Receiver, Over 300 feet Range, with 6ft NTC Temp Probe (Outlet Detect Temperature)

  • 【Outlet with 2m/6ft NTC Temp Sensor】: With highly accurate temperature sensor, the temperature is detected automatically by thermostat outlet. The WTC200 can be used in the remote and the outlet in different rooms (space). For example, if you want to control the temperature in the basement, you can put the outlet in the basement, place the remote control anywhere within 100 meters (bedroom, kitchen, living room, etc.), remotely set, control and see the temperature of the basement..
  • 【Heating & Cooling Mode】: Automatically turn on/off heating devices or cooling devices through your preset target temperature. When current temperature reach to target temperature, the thermostat plug stop to heat or cool. Maintains stable room temperature and provides comfort and energy saving. High and low temperature alarms are available, 3-Prong socket with grounded terminal, safe and reliable. The maximum load can reach 12A, 1300W..
  • ❤️ 【Distance】: Wireless Remotely Control, remotely set parameters and view temperature, no need to operate on the receiver, remote control distance can reach 100m (open space). It can save all settings even if the power failure. L....
Check Stock

Bear DSG-B08K1 Infant Mini Ceramic Linner Slow Cooker, Congee&Soup Mode for Infant, Baby and Child, Pink, 0.8L

  • 【3 Stages Program of Parenting】3 mode for infant(0-12 months), baby(1-3 years old) and child(3-6 years old) make the congee and soup more suitable for different ages..
  • 【Ceramic Liner】High temperature resistant ceramic liner can gather energy and have strong heat storage. 250 watts of firepower, transfer heat and warm up rapidly, make the porridge delicate and soft..
  • 【Anti-overflowing】NTC temperature sensor can monitor of high temperature in real-time, reduce the firepower to boil automatically, makes it not easy to overflow..
  • 【Fresh】0-9.5 hours preset timer and 8 hours heat preservation after finihing automatically. 0.8L small capacity have no waste of meals, you can enjoy fresh meals every day..
  • We value every single customer and hope to do better. Contact us if have any question..
Check Stock

uxcell NTC Thermistors Resistor MF52-103/3435 10K Ohm Inrush Current Limiter Temperature Sensor Pack of 60

  • NTC thermistors are ethoxyline resin-enveloped thermistors in small size. Used for temperature measurement..
  • 10K Ohm thermistors are very useful in many applications, and they are light for use..
  • NTC (Negative Temperature Coefficient) thermistors, their resistance drops as temperature increases..
  • Have them in a circuit built to accommodate them, they will work very well and consistently..
  • Widely used for air condition equipments, heating apparatus, electric thermometers, liquid level sensors, etc..
Check Stock

KETOTEK Digital Thermostat Outlet Plug Temperature Controller Outlet Socket 120V Heating Cooling Control 110V 15A Celsius/Fahrenheit Display

  • 【Relay output, easy to use】 Plug-and-play design, just plug the device into this thermostat plug outlet and set parameters, it will work as programmed. Power supply: 120V±15% AC.
  • 【Easy to program】 Just set start temperature and stop temperature, this plug in thermostat will work in heating or cooling mode. Temperature control range:-72℉~176℉(-40℃~120℃), temperature control accuracy: ±1%. Celsius and Fahrenheit can be converted. This digital temeprature controller also supports temperature calibration if needed..
  • 【Timing function】 F01 Cycle Timer mode.
  • F02 Countdown ON mode, F03 Countdown OFF mode, F04 Countdown ON and Countdown OFF mode. You can choose F01 mode to control the device to work in cycles, or choose F02~F04 modes to countdown to turn on or turn off the device. Set range: 0~99 hours 59 minutes. Please note that temperature control function and timing function cannot be used at the same time..
  • 【More functions】 3m NTC 10K temprature sensor probe. Large LCD display. Temperature calibration. Reset function. Data storage function that all parameters set can be saved after power off..
  • 【Wide Range of Application】This temperature controlled outlet plug is widely used for greenhouse, reptile, incubato....
Check Stock