Reviews Nt 2 Fuse

Bussmann BK/HKP-HH Panel Mounted Fuse Holder (Pack of 1)

  • 2 kinds of fuse holder with quick blow glass tube fuse, suits for Car Radio Audio DIY project..
  • In-line screw type fuse holder, with 22 AWG wire, suitable for 5x20mm glass fuse..
  • Panel mounted fuse holder, with screw cap and soldering terminals, rated voltage : AC 15A 125V, AC 10A 250V..
  • 10 different value glass fuse assortment, including 20pcs fuse 0.2A, 0.5, 1A, 2A, 3A, 5A, 6A, 8A, 10A, 15A, 10 pcs each value..
  • Package Content: 5 * fuse holder in-line screw type + 5 * panel mounted fuse holder + 100 * quick blow glass tube fuses..
Check Stock

Electop 6 Way Fuse Block Blade Fuse Box with Negative Bus 6 Circuit Fuse Holder Fuse Block w/Negative Bus Waterproof Protection Cover Sticker Labels for 12V/24V Automotive Car Truck Boat Marine RV

  • ★【NEW DESIGN 6 WAY FUSE BOX】Electop 6-Way Blade Fuse Block accepts 1A to 20A ATC/ATO(middle size) fuses. It has positive and negative sides, which means that each positive terminal screw has a negative terminal screw to make your circuit clear at a glance. This device is intended for branch circuit protection and has good conductivity. Max. 32V DC operating voltage. Max. 20 Amp per circuit & 75 Amp per panel..
  • ★【PREMIUM QUALITY & SAFE MATERIAL】Made of environment friendly PBT material, this fuse holder meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon..
  • ★【PROTECTION COVER & PRE-PRINTED DIY STICKERS】Transparent plastic cover with screw nut, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. Come with multi-function stickers for DIY your specific need, convenient for examination and repair, easy to troubleshoot in outdoor..
  • ★【WIDE APPICATION】This 6 Circuit Fuse Block widely used in Car, Truck, Boat, Tankers, Marine, SUV, Yacht, RV, Van, Ships etc. Each fuse of fuses box can be connected to any cir....
Check Stock

Foam Windscreen for Rode Microphones - Pop Filter Reduce Unwanted Recording and Background Noises - Compatible with Rode Podcaster, Procaster, Broadcaster, NT1, NT1A, NT2A, NT1000, NT2000, NTK, K2

  • Pop filter is specially designed to fit Rode line of microphones.
  • Compatible with Rode Podcaster, Procaster, Broadcaster, NT1, NT1A, NT2A, NT1000, NT2000, NTK, K2 (as Rode WS2 pop filter).
  • Protect your mic from saliva and dust damage and can be washed and dried.
  • Easy to get on your mic and can be used upside down.
  • High-quality foam filters out unwanted background noises.
Check Stock

BUNKER INDUST 10-Way Fuse Box Blade Fuse Block Holder with LED Indicator for Blown Fuse Waterpoof Protection Cover for Car Boat Marine Automotive,Include 20Pcs Blade Fuses and 1Pcs DIY Sticker

  • LED INDICATOR FOR BLOWN FUSE---Each circuit has red LED warning indication.If a fuse blows,the red LED next to the problem fuse will illuminate,allowing you easily identify and replace blown fuses immediately without guessing!.
  • 1 POWER CONNECTION/10 CIRCUIT OUT---Maximum of 30 Amp per circuit & 100 Amp per panel.4-Way Blade Fuse Box can interchangeable or compatible with all automobiles and devices equipped with a 10-33 Volt DC power source..
  • FUSE PROTECTION COVER---A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.Easy to operate, splash and dust-proof design..
  • HEAVY DUTY CONSTRUCTION---This fuse panel has a #10-33 stud for power feed, 250” male quick disconnect terminals, and can take an input voltage of 10 – 33 V DC..
  • PACKAGE INCLUDE---1Pcs 10-Way Fuse Box Holder,1Pcs DIY Sticker,20Pcs Blade Fuses: 5A x 2, 10A x 4, 15A x 4, 20A x 6,30Ax 2,40Ax 2. Note: This box holder is suitable for standard blade fuses(ATO/ATC).Please check the size or shape of fuse before purchasing..
Check Stock

WS2 Microphone Pop Filter/Windscreen Compatible with Rode NT1-A, Procaster, podcaster, NT2-A,K2, NT1000, NT2000and Broadcaster Microphones by SUNMON

  • 【Compatibility】- It's a professional wind shield that designs for your Rode NT1, NT1A, NT2A, NT1000, NT2000, NTK, K2, and procaster,Podcaster, & Broadcaster microphones perfectly (As Rode WS2 Pop Filter)..
  • 【Professional】- Rode WS2 foam cover improves the recording quality by drastically filter out all unwanted background noises. Keep the Microphone audio sound better and clearer, clean wind-canceling sound..
  • 【Protective】- This windscreen protects the Rode Mic from dust and moisture. Protect your Microphone when its in the bag..
  • 【Material】- The foam cover wind killer's material is extremely soft and elastic is quality. A tight fit and would not come off in use..
  • 【Note】- Package included: 1 x Foam Wind Cover..
Check Stock

FEBRYTOLD 10 Gauge Inline Fuse Holder - 2 Pack Fuse Holder Waterproof Pigtail Fuse Relay with 2 Pack 30AMP Blade Fuse & 2 Pack 40AMP Blade Fuse for Car Truck Boat Motorcycle

  • 【Widely Application】The fuse holder is suitable for ATC/ATO standard blade fuse of 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 40A. Widely used for boat,....
  • 【High-quality】The heavy duty 10 gauge (AWG) tin-plated copper wire is made of high quality material with good electrical conductivity and melting....
  • 【Easy to use】Directly plug to the existing fuse holder without splicing or cutting. Keep your car and electric device in a safe condition.With 30A....
  • 【Waterproof Design】The fuse holder with tight-fitting rubber cap, can maximum prevent water, dust, and dirt from getting in.
  • 【Package】2×10 gauge fuse holder, 2×30A blade fuse, 2×40A blade fuse.
Check Stock

Exmate 2 Pack 3.0Ah 3.6V Li-ion Battery with 3.6V Li-ion Battery Charger Compatible with Hitachi EBM315 326263 326299, DB3DL, DB3DL2, FDB 3DL, NT50GS, NT65GA, NT65GS, NT65GB Cordless Power Tool

  • Battery Type: Li-ion | Voltage: 3.6V | Capacity: 3000mAh | Package: 2 Batteries + 1 Charger | Time for a fully charged: 1.5 - 3 hours..
  • Compatible with HITACHI EMB315, EB920HS, EB920RS, EB926H, EB930H, EB930R, EB9H,B3,EB9,EB912S, EB914S, EB912S, 326263, 326299, NT65GS, NT65GB, NT65GA, NT50GS, FDB3DL, DB3DL2, DB3DL,etc. Use with Bostitch cordless framing nailers: GFN1564K, GFN1664K and GBT1850K..
  • No memory effect, made by high quality battery cells, eco-friendly, efficiently, stable and endurable. Almost no memory effect, can be charged or discharged as needed..
  • CE, FCC, RoHS certified, both battery and charger have passed the test of over charge, over discharge, short circuit, high temperature, high humidity, internal overheating to extend the life of the tool battery..
  • 30 days money back, 1 year warranty and 24 hours friendly customer service. If you have any questions, please feel free to contact us..
Check Stock

Beaquicy Microwave Fuse 20 Amp 250V Ceramic Fuse Cartridge Fuse Slow-Blow WB27X10388 Replacement for G-E Ken-More Microwave (5-Pack)

  • ✅【20Amp 250V】: The package includes 5 x ceramic slow blow fuse. This microwave fuse shuts down the microwave oven in case of a power surge, preventing the microwave oven from receiving damage during a surge. The fuse has a width of 0.25 inches and a height of 1.16 inches. 20a fuse is made of ceramic and its rated specification is: 20Amp, 250V. Replacing ge microwave fuse solves the FOLLOWING SYMPTOMS: ►Abnormal current, generating heat ►The circuit operate unsafely ►Microwave fuse blown..
  • ✅【5pcs CERAMIC FUSES】:5-Pack 250v 20a fuse microwave is made of durable high quality ceramic. The high quality ceramic material makes 20 amp fuse better able to achieve the effect of power failure. When the current abnormally increases to a certain level and generates heat, it will break, thus protecting the safe operation of the circuit. The since surges do not disappear when the power is disconnected, it is necessary to install this fuse to protect the microwave's electrical panel..
  • ✅【GE/KENMORE MICROWAVES】:The 20Amp Ceramic Cartridge Fuse replaces:875392, AP3994062, PS1481237, EAP1481237, WB27X10928, WB27X10388. COMPATIBLE WITH: JVM2052DN1WW, JVM2052....
Check Stock

WUPP 12 Volt Fuse Block Waterproof Boat Fuse Panel with LED Warning Indicator Damp-Proof Cover - 6 Circuits with Negative Bus Fuse Box for Car Marine RV Truck DC 12-24V Fuses Included

  • QUICK FIX: When the current/voltage exceeds the rated range,the fuse will be automatically blown.It has leds beside each load to indicate if a circuit has shorted or has blown.So you can easily identify it and change it!.
  • MAKE WIRING CLEAN: Instead of piling a mess of wires and fuse holders onto your battery posts, WUPP 12 volt fuse block/ground bus kit gives you 6 dedicated fuses and 6 ground locations to keep all of your wires clean, organized, and accessible. Made wiring electronics in your vehicles or boat a breeze!.
  • UNIVERSAL PROTECTION: The input rated voltage of the fuse box is 32V,and the input rated current is 100A.Each circuit outputs a maximum current of 30A. All bus bars and fuse pieces are nickel-plated copper, corrosion-resistant and highly conductive..
  • SAFE MATERIAL: PBT flame retardant material base,good mechanical strength and high temperature resistance. It is insulated, heat resistant and flame resistant. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon..
  • FREE BLADE FUSES: 6-Way Package includes: 20A Fuse*4, 15A Fuse*4, 10A Fuse*2, 5A Fuse*2, Labels*2, Screws*4.
Check Stock