MSR 3 in 1 Cap Water Storage Systems Black

  • Replacement cap for Dromedary and Droplight bags.
  • Features a large filling cap, a smaller pouring cap, and a flip-up nozzle for drinking or washing hands and dishes.
Check Stock

ufashionday Bottle Cap Sprinkler - Plastic Dual Head Bottle Watering Spout Bonsai Watering Can for Indoor Seedlings Plants, 2in1 Watering Cans Sprinkler Shower Head Garden Tool (1.1inch, Blue+Yellow)

  • ※High Quality Material – Made from durable plastic material, the watering sprinkler nozzle features durable and not easy to break. It can be used for a very long time, brings much convenience to daily life..
  • ※Nozzle Hole Inner Diameter:1.1 inch – This dual head bottle cap sprinkler with a 1.1” cap diameter, fits most beverage bottles, such as Cola, Fenta, Sprite bottles and 2 liter soda bottles. Also can be applied as bonsai watering cans for meeting your various needs..
  • ※Dual Head Bottle Bonsai Watering Can – With 2 different sprinkles design for providing delicate and directional watering. Evenly&gently rain mode for watering seeds&seedlings and the pouring spout design for pouring a focused flow of water to the root. Both the two watering modes will bring a very nice using experience. Even children can use this watering cans sprinkler to watering plants easily and safely..
  • ※Easy to Use – Simply screw the plastic sprinkler nozzle on to the mouth of old or used plastic water bottles(Note: the nozzle hole inner diameter is 1.1inch). Squeeze the water bottle and voila a gentle rain of water will fall and watering your bonsai or seedlings(Note: Gently press bottle body for gently rain spraying. When pouring wa....
Check Stock

Nerf Super Soaker Hydro Frenzy Water Blaster, Wild 3-in-1 Soaking Fun, Adjustable Nozzle, 2 Water-Launching Tubes, for Kids Teens Adults

  • WILD 3-IN-1 SOAKING FUN: The Nerf Super Soaker Hydro Frenzy water blaster has 2 tubes and an adjustable nozzle to change the way the water blasts from the tubes, for wild 3-in-1 soaking fun.
  • 3 WAYS TO SOAK: Blast 2 parallel streams, pull back the nozzle halfway for 2 wide-blasting streams, or pull the nozzle all the way back for 2 twisting streams that send water flying in all directions.
  • ADJUSTABLE NOZZLE: The nozzle on the front of the blaster easily slides backwards and forwards so you can change the way the water launches from the blaster.
  • FILL, PUMP, AND BLAST: Open the cap to fill the tank, and pump the handle to sending splashing streams at everyone. Tank capacity is 24 fl. oz. (709 mL).
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle,(1 Kit-Yellow) with 2 Screw Collar Caps(1 Coarse Thread &1 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

  • ...hread size is (1-3/4--1.7in), It can only be used for gas cans with a can mouth size of 1.75in. Please measure your oil cans mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (gas can vent caps-A) is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use. (gas can vent caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps..
  • Simple to install, Each set of products includes, 2 Screw Collar Caps(1 Coarse Thread &....
Check Stock

Gas Can Spout Replacement ,Gas Can Nozzle,(2 Kit-White) with 4 Screw Collar Caps(2 Coarse Thread &2 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps,Thick Rubber pad,Spout Cover,Base Caps

  • ...hread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas con vent caps, (Gas Con Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Con Vent Caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps..
  • Simple to install, Each set of products includes, 4 Screw Collar Caps (2 C....
Check Stock

TERA PUMP Electric Multipurpose Gas Transfer Pump with Quick Stop Nozzle for Gas, Diesel, DEF & More

  • [ TRANSFER RATES ] Transfers up to 2.5 Gallons per Minute with Flow Control Nozzle. Control the flow by squeezing the nozzle lever, Lower Level Tigger Position is great for refueling gas, diesel and more & Upper lever trigger position is great for watering sessions. Nozzle can also be locked for longer watering or fueling sessions.
  • [ RECOMMENDED ] Suitable for Gasoline, diesel, DEF (AdBlue), non-potable water, kerosene, antifreeze, windshield washer fluid, mild detergents, agricultural chemicals & light oils - Discharge Hose of 39.4-inch for refueling for farther distances - Discharge Hose Holder: Built-in nozzle holder for safe and convenient way of storing the discharge nozzle.
  • [ SUCTION TUBE ] Suction Tube length of about 15-inch, Fits 3-Gallon (~11.4-Liters) Gas Cans, 5-Gallon (~19-Liters) Gas Can or up to 5-Gallon Pails - Suction end Outer Diameter: 1-inch - Swivel Nut Nozzle prevents hose from tangling with 360 degree rotation.
  • [ BATTERY POWERED ] Powered with Two (D) Battery Powered, Sold Separately - Big Slide Switch: Big On/Off Switch - Works great with farm equipment, Industrial Vehicles and in Automotive ....
Check Stock

Mcvcoyh Gas Can Replacement Spout Kit, Flexible Pour Nozzle with Gasket, Stopper Caps, Collar Caps, Stripe Cap, Spout Kit for Water Jugs and Old Can, 3 Pack

  • 【Replacement Package Design】:The spout design with strainer inside, which can efficiently filtered gas. Update your old cans nozzle, they made with strength ABS quality plastic materia..
  • 【No More Leaking】Update version nozzle to better fits your cans, do need to worry leaking. easily pour the liquid to yours, you will never spill gas all over yourself and your equipment again..
  • 【Package】: Included 3 x White Spouts with rubber gasket, 3 x Spout Caps, 3 x Screw Collar Cap, 3 x yellow vent Cap..
  • 【Idea for Equipment】: Use our gas can spouts be your part replacements instead of buying a new gas can. for spent less and saving on costly fuel spillage..
  • As shown in picture, the yellow vent cap is meant to perform as vent plug on the cans and has nothing to do with spout.
Check Stock

A+ Universal Gas Can Spout Replacement Kit, Water Jug Or Gas Can Spout, Update Your Old Can, 5 Pack

  • High Quality: The Gas Can Spout Kit are made of high strength ABS plastic, which are bendable and durable..
  • Easier to Pour: The Gas Can Nozzle flexible design bends up to 90 degrees, You can adjust the angle to pour gas into tank simply and easily.
  • No More Spilling: This Flexible Pour Nozzle with Gasket, When you pouring the liquid, you will never spill gas all over yourself and your equipment again, Save fuel at the same time.
  • All You Need: Package includes: 5* White Spouts with rubber gasket, 5 * Spout Caps, 10 *Screw Collar Cap (5 yellow and 5 Black), 5 * Black Rear Stripe Cap..
Check Stock

SureCan Fuel Gas Can, 2.2 Gallons

  • 5-GALLON DIESEL CAN: 5-gallon diesel fuel can helps fill your big machines, no painful bending, tipping, or awkward holding required.
  • Dimensions (D x W x H): 13.1 x 10.24 x 15.61 inches.
  • 180-DEGREE NOZZLE: 180-degree flexible rotating nozzle makes pouring gas into your truck or tractor easier.
  • SMOOTH & CONTROLLED FLOW: Self-venting for smooth fuel flow and minimal spillage.
  • Thumb trigger releases gas on your command, making sure you're always in complete control.
  • COMFORT GRIP HANDLES: Bottom handgrips help you support the weight and keep your fingers comfy.
  • SAFE & DURABLE: Durable HDPE material stands up to the elements for long-term dependability.
  • Child-proof nozzle cap with integrated tether ensures safety.
  • Flame mitigation device in fill neck adds another layer of protection.
Check Stock