Reviews Non ferrous Silicon

Mitchell Abrasives - 59S-25 59-S Flat Abrasive Tape, Silicon Carbide 150 Grit 1/4\ Wide x 25 Feet

  • Our tapes sand and clean hard to reach areas where your standard tools will not fit.
  • Firm enough so they won't tear or fray and will hold up in all types of applications.
  • Silicon Carbide-hard and sharp abrasive, ideal on non-ferrous materials such as aluminum, brass, titanium, as well as plastic and wood.
  • Ideal on metal, plastic, wood, or virtually any surface, fits in slots, grooves and small holes.
  • Cords and Tapes are fully coated on all sides for more complete and effective coverage.
Check Stock

Mitchell Abrasives - 54HS-25 54H-S Round Abrasive Cord, Silicon Carbide 180 Grit .025\ Diameter x 25 Feet

  • Our cords sand and clean hard to reach areas where your standard tools will not fit.
  • Firm enough so they won't tear or fray and will hold up in all types of applications.
  • Silicon Carbide-hard and sharp abrasive, ideal on non-ferrous materials such as aluminum, brass, titanium, as well as plastic and wood.
  • Ideal on metal, plastic, wood, or virtually any surface, fits in slots, grooves and small holes.
  • Cords and Tapes are fully coated on all sides for more complete and effective coverage.
Check Stock

Metal Detector X10 Pro with 9*5\ Coil Waterproof Light Weight Easy to Use Loud Speaker Built-in Rechargeable Battery Perfect for Beginners

  • DETECTION OF 3 TYPES OF METALS: MMD02 provides 3 detection to detect 3 types of different metals, for the 3 different types it will emit the 3 different sounds: a low tone alarm sound for ferrous metals, a medium tone alarm sound for low conductivity non-ferrous metals, and a high-tone alarm sound for high conductivity non-ferrous metals..
  • FANTASTIC DISC BUTTON: By pressing the DISC button of MMD02, you can easily detect certain types of metals: once for ferrous metals, twice to exclude even low conductivity non-ferrous metals, three times to return to normal detection. MMD02 helps to find metal faster, also thanks to the deep detection function. Depending on the depth, different icons will appear on the MMD02 display..
  • FUN FOR EVERYONE: The detection rod of MMD02 can be freely adjusted in length from 61cm to 90cm. Not only is it usable by adults, but it also provides the joy of treasure hunting for kids. The non-slip strip equipped with MMD02 makes it more convenient to carry. The waterproof coil also offers another detection possibility, namely shallow water detection. ? Notice: The detection rod and coil are waterproof, but the detector is not..
  • DETECTION OF 3 TYPES OF METALS: MMD02 provides 3 detection to detect 3 types of different metals, for the ....
Check Stock

GBJ APKT1604 PDFR Aluminum R0.2 Cutting Inserts Aluminum Cutting Tool Turning Tool CNC Tools AL+TIN Alloy Wood

  • ☞Material:Using imported substrates, the service life is greatly increased. Stable, durable and sharp when cutting..
  • ☞ Advantage: The cutting edge is sharp, the processing is brisk, and the chip removal is smooth. The cutting edge is specially treated, and the products processed have a high degree of smoothness and a mirror effect..
  • ☞ Processing range: JW40-aluminum alloy general processing and non-ferrous metal. Especially high-silicon aluminum alloy. 02 angle is especially suitable for finishing..
  • ☞ Package includes: 10pcs (Boxed) APKT1604PDFR-MA for Aluminum Inserts.
Check Stock

6 Inch Bench Grinder Grinding Wheel & Wire Wheel Brush with 1/2'' Arbor, 60 Grit Silicon Carbide Bench Grinding Wheel for Bench Grinder,for Drill Bits, Blades and Knifes Cleaning Polishing Sharpening

  • 【QUALITY UPGRADE】: Grinding wheel is made of green silicon carbide, high hardness, durablity and wear resistance.
  • Wheel brush is made of high quality carbon steel wire, good toughness for remving light burrs and paints. Even balance provides smooth performance..
  • 【MULTI-FUNCTION】: Bench grinder grinding wheel and wire wheel brush set is designed for high precision edges and surfaces cleaning, sanding, rust removing and polishing..
  • 【STANDARD SIZE FOR BENCH GRINDER】: Standard 1/2'' arbor hole size fit for most brand 6 inch bench grinder machines and work benches .(Please wear all applicable safety gear when using wheels).
  • 【WIDELY APPLICATION】: Suit for most non-ferrous tools like drills, knifes, mills,blades and metals such as aluminum, copper, titanium, carbide,stainless steel,etc..
  • 【PACKING INCLUDE】: Pack of 1pc x 6 inch coarse 60 Grit silicon carbide grinding wheel, 1pc x 6 inch by 0.008 inch fine crimped wire wheel brush. The great grinding kit for your bench grinder..
Check Stock

6 Inch Bench Grinder Grinding Wheel & Wire Wheel Brush with 1/2'' Arbor, 120 Grit Silicon Carbide Bench Grinding Wheel for Bench Grinder,for Drill Bits, Blades and Knifes Cleaning Polishing Sharpening

  • 【QUALITY UPGRADE】: Grinding wheel is made of green silicon carbide, high hardness, durablity and wear resistance.
  • Wheel brush is made of high quality carbon steel wire, good toughness for remving light burrs and paints. Even balance provides smooth performance..
  • 【MULTI-FUNCTION】: Bench grinder grinding wheel and wire wheel brush set is designed for high precision edges and surfaces cleaning, sanding, rust removing and polishing..
  • 【STANDARD SIZE FOR BENCH GRINDER】: Standard 1/2'' arbor hole size fit for most brand 6 inch bench grinder machines and work benches .(Please wear all applicable safety gear when using wheels).
  • 【WIDELY APPLICATION】: Suit for most non-ferrous tools like drills, knifes, mills,blades and metals such as aluminum, copper, titanium, carbide,stainless steel,etc..
  • 【PACKING INCLUDE】: Pack of 1pc x 6 inch fine 120 Grit silicon carbide grinding wheel, 1pc x 6 inch by 0.008 inch fine crimped wire wheel brush. The great grinding kit for your bench grinder..
Check Stock

Graphite Ingot Mold, 60ml Capacity Crucible Mould, 2Packs Metal Casting Molds for Casting Melting Refining Gold Silver Aluminum Copper Brass Zinc Plumbum and Alloy (4\x2\x1\-1000g Gold; 540g Silver)

  • ...e energy. The premium graphite ingot molds can withstand up to 3600°F (2000 ℃). Strong acid and alkali resistance, good corrosion resistance, impact resistance, 75MPA compression resistance, and 55MPa flex resistance..
  • [WIDE APPLICATION] - The metal casting molds can be applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, lead and more. The ingot molds can also work as graphite crucible for melting into non-ferrous metals, test analysis, or other purposes..
  • [WARM TIPS] - Pure graphite crucible can NOT be heating by carbon furnace or charcoal kiln. If so, the metal casting molds will soon be oxidized and cracked. Pure graphite will start to oxidize at 752 °F (400 ℃). The withstand temperatures of graphite crucible can be 3200 °F in Air Electric Furnace and 5000 °F in Vacuum or Gas Protection Furnace..
Check Stock

uxcell 1.75mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs

  • Specification: Diameter: 1.75mm / 0.07″.
  • Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC.
  • Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc..
  • For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
  • Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle.
  • Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.
Check Stock

uxcell 3.25mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs

  • Specification: Diameter: 3.25mm / 0.13″.
  • Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC.
  • Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc..
  • For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
  • Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle.
  • Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.
Check Stock