Reviews Non ferrous Plate

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 10 Rods

  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 20 Rods

  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock

TOMAX 12-Inch 100 Tooth TCG Aluminum and Non-Ferrous Metal Saw Blade with 1-Inch Arbor

  • Ideal for cutting Plastic, Aluminum and Non-Ferrous Metals.
  • Construction grade carbide teeth provide maximum resistance for longer life.
  • Electrophoretic Coating reduces the rusting and corrosion.
  • TCG Grind for a durable and smooth cut on non-ferrous metals, aluminum, and plastic items.
  • Quality Guarantee, Limited Lifetime Warranty by TOMAX.
Check Stock

TOMAX 10-Inch 80 Tooth TCG Aluminum and Non-Ferrous Metal Saw Blade with 5/8-Inch Arbor

  • Ideal for cutting Plastic, Aluminum and Non-Ferrous Metals.
  • Construction grade carbide teeth provide maximum resistance for longer life.
  • Electrophoretic Coating reduces the rusting and corrosion.
  • TCG Grind for a durable and smooth cut on non-ferrous metals, aluminum, and plastic items.
  • Quality Guarantee, Limited Lifetime Warranty by TOMAX.
Check Stock

Rockwell RW8967.3 Sonicrafter Oscillating Multitool Extended Life Bimetal Wood & Nail End Cut Blade 3-Pack 1-3/8

  • Use to make plunge cuts up to 1-5/8-inch deep.
  • Cut wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal, and Hardened fillers.
  • Hardened teeth will cut non-ferrous metals.
  • Universal fit system adapts to other brands.
  • Blade dimensions: 3.5 L x 1.35 W x .5 H inches.
Check Stock

Zircon MetalliScanner m40 Handheld Electronic Metal Detector For Use on Dry Wall, Concrete, Lathe and Plaster, Stucco and More

  • Locates ferrous (magnetic) metal behind walls up to 4-Inch (102 mm) deep and non-ferrous (non-magnetic) metal up to 2-Inch (51 mm) deep.
  • Quickly and easily detects metal in wood, drywall, paneling, tile, stucco, plaster, concrete and other non-metallic surfaces.
  • Works as a great stud finder for plaster walls, as well as finding rebar in concrete.
  • Easily finds plumbing, ductwork, rebar, nails and screws in your walls, floors and ceilings.
Check Stock

Annular Cutters 8pcs/Set,2''Cutting Depth,3/4''Weldon Shank,(9/16,11/16,13/16,15/16,1,1-1/16)inch Cutting Diameter Annular Cutters,OSCARBIDE HSS Slugger Bits,Mag Drill Bits for Magnetic Drill Press with 2 pcs Pilot Pins

  • Annular Cutter Kit includes 6 pcs high speed steel annular cutters,2"Cutting Depth,Cutting Diameter(9/16", 11/16'', 13/16'', 15/16'', 1“,1-1/16) and 2pcs pilot pins..
  • OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time..
  • These annular ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • OSCARBIDE annular cutters sets 3/4" Weldon shank with 2 flats,fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders.
  • These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel.
Check Stock

Benchmark Abrasives 4.5\ Super Thin Turbo Diamond Blade Angle Grinder Blades for Cutting Wood, Alloy Steel, Glass, Ceramic, Plastic, Iron, Marble, Stone, Metals, Tiles, PVC

  • HIGH-QUALITY, SUPERABRASIVE DIAMONDS - Made with the latest diamond vacuum-brazing process for the strongest bond possible to the steel core. Excellent for cutting through pre-stressed concrete, ferrous and non-ferrous metals, pipe, metal plate, steel bar, angle iron, ductile iron, rebar, steel rod, iron bars, ductile pipe, cast iron, copper, brass, stainless steel, aluminum, scrap metal, HDPE and PVC plastic pipe..
  • LASTS 100X+ LONGER - Compared to traditional abrasive cut off wheels and will cut with a constant, even cutting depth that doesnt wear down as you cut. Abrasive discs wear down and will shrink which can be dangerous. This diamond blade maintains a constant cutting depth, giving you the maximum cutting depth throughout the life of the blade. Save time by using one blade without having to constantly put on a new disc..
  • SIDE COATING - Prevents stress build up and allows the side of the blade to be used for grinding. Trusted by firefighters and swat teams worldwide, this diamond blade is used as an emergency rescue and tactical entry tool..
  • SPECIFICATIONS - 12" diameter X .125 thick with a 1" Arbor with 20MM Bushing. The maximum safe operating speed is 6,300 RPM..
  • LIFETIME WARRANTY - This product has a 100% lifetime warranty with free return....
Check Stock

Wood Carving Chainsaw Carving T-Shirt Gift for Wood Carver

  • ✅ FAST STOCK REMOVAL – Forget about hand woodworking carving tools for initial shaping or gouging! With this multifunction saw blade, you can cut right through wood like butter. Cuts everything from hardwood, plastics, and other soft non-ferrous materials..
  • ✅ 7/8" ARBOR – If your angle grinder is 4-1/2" (115 mm) or 5" (125 mm), choose our blade with a 7/8-inch (22.23 mm) arbor, for which grinders the TOOLMERS 4"x7/8" chainsaw disc is designed. Chain wheel with a 5/8" (16 mm) center hole is intended for 4-inch angle grinders..
  • ✅ EXTRA CHAIN – If your chain plate gets dull during work, you can quickly replace the chain with the included extra circlet. Continue work on your project after 1-2 minutes and sharpen the worn-out circlet later. To buy MORE CIRCLETS check in the variations section (to the right or below the product images)..
  • ✅ STORAGE BOX – Our chainsaw blade comes in a cool carton box with great design for storing the disc when not in use. Keeping the chainsaw teeth blade unpacked, for example, in a drawer with other things, can cause the cutting edges of the chain teeth to blunt. Use the box for storage and protect your blade..
  • ✅ TOOTH INDICATOR – To help you install the chain correctly, we added a laser-printed tooth icon on....
Check Stock