Reviews Nipple Fittings For High Pressure Systems

Shurflo 2088 Elbow Fitting - Elbow 1/2\ NPT-F Swivel Nut X 1/2\ Hose Barb, Nylon, (Pack of 2), P/N 244-3926-2

  • 【0% Metaloxide】: PEX A expansion elbow made by premium PPSU materials without metal, provide lead-free potable water, healthy for human and environment..
  • 【PPSU Materials】: Light and durable, chemical stability. Well performance in corrosion resistant, heat and water resistance, RO (reverse osmosis), chlorinated and other types of water. Meet cUPC, NSF, F1960 standard..
  • 【160 PSI, 200°F】: Expansion elbow fittings tightly connect with pex-a tube under high temperature/pressure. Applied to Building services pipework systems, Plumbing and heating (or cooling) systems, Potable water service line etc..
  • 【Stopping Shoulders】: To indicate PEX A pipe fully insert in expansion fittings, leak-free. Cold connection, use with expander and expansion rings, no require for glue or sealing tape..
  • 【Package】: 1/2" Expansion 90 Elbow Fittings 10PCS 1/2.
Check Stock

TL TOOLEGIN DOT Brass Push to Connect Fittings 1/4" Air Brake Union Air Line Fittings Push in Fittings Brass Union Air Brake Repair Kit Contains Tube Push-in Tee Union Coupling Male NPT 90° Elbow

  • Unique Air Line Tubing Kit: The air brake fittings contains 2pcs 1/4” Unions, 2pcs 1/4’’ Tees, 2pcs 1/4” DOT Push-In × 1/4” MNPT, 2pcs 1/4” DOT Push-In × 1/8” MNPT 90° Elbow, 2pcs 1/4” DOT Push-In × 1/4” MNPT 90° Elbow..
  • High-quality Material: Our push in fittings are made of high quality brass CA360 CA377 , with corrosion resistance, high temperature ductility and low permeability..
  • Technical Parameter: The Working Pressure is from Vacuum to 250 psi, the Working Temperature is from -40° F to +200° F..
  • Easy to install: All fittings can be sealed by pushing the tube firmly into the fittings, and they are also simple to be removed from the tube..
  • Wildly Usage: The air brake union assortment kit can be used with air systems, copper tubing in air brake systems, which is perfect for garages, workshops and so on..
Check Stock

Arizona Mist 92100 Booster Pump

  • Increases or boosts line pressure to 160 psi..
  • Creates a finer mist for greater cooling and enjoyment.
  • Quickly connects to your mist system and water source with the simplicity of built in slip lock fittings.
  • For use with Orbit 30002 stainless steel or 31012 flexible high pressure systems only..
Check Stock

Permatex 80632 Thread Sealant with PTFE, 4 oz. , White

  • Economical general-purpose fitting sealant.
  • Seals and resists pressure in air, oil, diesel fuel and hydraulic systems.
  • Remains pliable at higher and lower temperatures.
  • Suggested Applications: Air conditioning fittings, temperature sending fittings, hydraulic fittings.
Check Stock

TL TOOLEGIN Push to Connect Fittings 3/8" Tube OD x 1/4" NPT Male Air Line Fittings Air Hose Fittings Pneumatic Fittings DOT Air Fittings Air Compressor Quick Connect Fittings Brake Line Fittings 5pcs

  • This 3/8" push to connect elbow fitting is designed for use in pneumatic systems, operates with a working pressure of vacuum to 250psi and temperature range of -40℉ to +200℉..
  • Constructed with high-quality CA360 brass casting for long-lasting performance. Resistant to corrosion and rust, ensuring a leak-free connection for a long time..
  • TL TOOLEGIN air line fittings meet rigorous safety standards with D.O.T FMVSS 571.106 certification, ideal for those seeking a durable and reliable solution for their pneumatic system needs..
  • Easy to install, simply push the tubing into the air hose fitting to create a secure, leak-free connection. No tools, soldering, or crimping required. The fittings elbow has a compact design, allowing for flexible installation in tight spaces..
  • Widely Used, these air brake fittings are suitable for a variety of fluid and air transfer applications, such as air compressors, pneumatic control systems, and vacuum systems..
Check Stock

Doheny's Pool Pro Cartridge Filter Tanks & Filter Systems for Above Ground Swimming Pools (70 Sq. Ft. System w/ 1 HP Pump)

  • STRONG AND RELIABLE, Doheny's Cartridge Filter Systems are engineered with tough and long-lasting thermoplastic materials..
  • THE PRECISE AND EXTRA-LARGE cartridge filter element is made of non-woven fabrics providing a high degree of water clarity, longer filter cycles and maximum water flow.
  • FOR EASE OF USE, the top cover is built with a pressure gauge and release valve to release built-up air pressure and is specially equipped with a fastening locking system which prevents dead locking.
  • SYSTEMS FEATURE a 1 1/2 in. threaded connector and is rated at 115V/60Hz. Systems also include a high-efficiency pump and fittings shown in photo.
  • FILTER ONLY'S DO NOT INCLUDE PUMP, SYSTEM BASE or PUMP TO TANK CONNECTION..
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • ...gh pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Please note, there is no pressure relief valve and drain hose, please wrap cloth around hose connection before relieving pressure from fuel line and removing testing components..
  • CHECK FUEL INJECTOR PUMP PRESSURE: The pressure gauge is designed for checking the fuel....
Check Stock

64 Pcs. O-Ring Face Seal ORFS Cap & Plug Assortment Kit, Galvanized Steel with Precision Threading ORS Flat Face Hydraulic Fitting Set, Dash Sizes 04 06 08 10 12 16

  • High-Quality and Long-Lasting Zinc Trivalent Plated AISI 12L14 Carbon Steel O-Ring Face Seal Cap & Plug Fittings Kit - Conform to SAE J1453 Technical Specifications, Prevents Corrosion and Withstands High Pressure Applications.
  • Set Includes 6 Most Used Cap & Plug Sizes: #4 (9/16-18), #6 (11/16-16), #8 (13/16-16), #10 (1-14), #12 (1 3/16-12), #16 (1 7/16-12).
  • These fittings are used in a test-point and diagnostic setting. They are most commonly used in fluid power and fuel delivery applications, especially those using high pressure.
  • Suitable for use with machine tools, agricultural and earth moving machinery, truck, chemical processing systems, and most other high-pressure petroleum and mineral oil-based fluids hydraulic applications.
  • Package Quantity: 64-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box, Keeps Set Secure and Organized.
Check Stock

JoyFans Fuel Pressure Test Kit, TU-114 Fuel Injector Pump Pressure Tester Automotive Tool with Gauge Adapter for Schrader Test Port Fuel Injection System on Car Motorcycle Blue Case

  • ...ial, ranging from 0-10 bar (0-140 psi) for easy and accurate work on both American and metric systems. High precision 3-1/2" gauge easily holds pressure values and has convenient pressure reset button with 16" drain hose for safe fuel recovery. 15" built-in flexible hose adapter has 300 psi W.P, can be connected to fittings for fuel pressure test..
  • Scope of Application: JoyFans fuel injection pressure tester kit covers a variety of gasoline engine cars, motorcycles, trucks, SUVs, ATVs, RVs with modern Schrader test port fuel injection systems but Bosch, CIS Jetronic, Throttle Body System on GM vehicles. Custom-made toolbox bases on the shapes and sizes of all tools to keep them neat and steady with an instruction included for quick size reference. Easy transportation, safe storage, and simple identification..
  • Built to Last: Fuel pump tester kit supplies with a full series of precision-machined adapters making it universal for most vehicles. Adapters constructed from high-quality metal comes in a variety of sizes for added suitability. Resisting oil, rust and corrosion, ensures years of reliable use. Hoses adopt reinforced rubber nylon resin, withstand torsion, temperature, and pressure. 8" short hose ends with brass fittings, 2pcs cut hoses size: 1/4"I....
Check Stock