Reviews Multimeter With Usb Output

USB Cable Triad Tester, 3-in-1 Data Wire Test Fixture Precise Type-C/Mini USB/Micro-USB USB Cable Triad Tester for Testing Research

  • 【Multifunctional Tester】：Multiple ports (USB, Type-C and Micro USB) for checking the charging status and process of your USB device or Type c device. New upgraded multimeter tester maximum voltage and current 32V/5.1A/150W, the tester supports a variety of fast charging detection, the process of electrical signal to monitor the charging protocol to meet the various needs of cell phone users. Can also be used to test the capacity and power of mobile power..
  • 【Professional safety protection】: with overvoltage protection, overcurrent protection, undervoltage protection, low energy protection and alarm system. This upgraded USB Type C tester detects safety and maximizes device protection from damage. Automatic output cut-off, audible alarm, sudden power failure to save data..
  • 【Newest Upgraded IPS color screen】: The new upgraded version provides 8 LCD main color screen display interface, key switch display interface. Through the new interface settings, support OTG function, monitor the voltage, current, capacity, power, USB’s power, load impedance, D/D-voltage and other data of USB or type c supported devices. Switch multiple interfaces with the click of a button. (Support 180 degree flip screen, 3 kinds of personalized interface!).
Check Stock

Hantek 2D72 Handheld Oscilloscope 70MHz Waveform Generator Multimeter 3 in 1 Multifunction Tester 2CH+AFG+DMM

  • Function: Oscilloscope+Multimeter+Waveform Generator.
  • 70 MHz Digital Oscilloscope with 2 channels -- Sample Rate Range 250MSa/s(Single-channel), 125MSa/s(Dual-channel)..
  • Simplify operation, convenient to use: 250M Sampling rate, 70MHZ Bandwidth. 10MV-10V Vertical resolution.
  • Key tone settings, Adjustable backlight brightness, Backlight, duration and auto power off time. Digital voltmeter function, Cursor measurement, reference waveform,waveform Storage function..
  • Multifunction Digital Multimeter Function, High sensitivity and accuracy, showing clear, stronganti-overload capability, easy to carry. Digital multimeter which can be used to measure AC/DC voltage/current, resistance, diode,capacitance, on-off test..
  • Large-capacity Lithium Battery + Ultra Low Power + Type C Data Transfer/Charging Interface 18650 replaceable lithium battery power system.
  • Be able to recharged by 5V/2A large current or ordinary computer USB port,allow while charging, very convenient and handy.
  • Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months..
  • We offer 1 year warranty with 30 days worry-free return, so 100% satisfaction and zero hassle returns guaranteed....
Check Stock

Hantek 2D42 Handheld Oscilloscope 40MHz Waveform Generator Multimeter 3 in 1 Multifunction Tester 2CH+AFG+DMM Scope

  • Function: Oscilloscope + Multimeter+ Waveform Generator.
  • 40 MHz Digital Oscilloscope with 2 channels -- Sample Rate Range 250MSa/s(Single-channel), 125MSa/s(Dual-channel)..
  • Simplify operation, convenient to use: 250M Sampling rate, 40MHZ Bandwidth. 10MV-10V Vertical resolution.
  • Key tone settings, Adjustable backlight brightness, Backlight, duration and auto power off time. Digital voltmeter function, Cursor measurement, reference waveform,waveform Storage function..
  • Multifunction Digital Multimeter Function, High sensitivity and accuracy, showing clear, stronganti-overload capability, easy to carry. Digital multimeter which can be used to measure AC/DC voltage/current, resistance, diode,capacitance, on-off test..
  • Large-capacity Lithium Battery + Ultra Low Power + Type C Data Transfer/Charging Interface 18650 replaceable lithium battery power system.
  • Be able to recharged by 5V/2A large current or ordinary computer USB port,allow while charging, very convenient and handy.
  • Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months..
  • We offer 1 year warranty with 30 days worry-free return, so 100% satisfaction and zero hassle returns guarant....
Check Stock

Southwire Tools & Equipment M400TP Professional Data Cable Mapper

  • 10 MEASUREMENT FUNCTIONS: This Digital Multimeter measures AC and DC Voltage, AC and DC current, continuity, resistance, Capacitance, frequency, duty....
  • MULTIPLE USE DESIGN: This compact digital multimeter features a 3-in-1 design with multimeter, non-contact AC Voltage detector and work light..
  • DURABILITY AND RELIABILITY: The 16020N Compact 3-in-1 CAT IV Digital Multimeter was built to last and has a drop test of 2M..
  • SAFETY AND INDUSTRY APPROVAL: This multimeter is UL Listed – representative samples of this product have been evaluated by UL and meet applicable....
  • WHAT’S IN THE BOX: The multimeter tester - 16020N Compact 3-in-1 CAT IV Digital Multimeter and AAA Battery (2) Included..
Check Stock

ennoLogic Volt mA Thermocouple Loop Process Calibrator eC370T - 0-20V and 4-20mA Simulator – Portable Millivolt mA and Temperature Signal Generator and Meter for Transmitters Current Loops PLC

  • ...ut signals configuring options. HOTKEY programming for each numeric key (long-press immediately outputs user-configured voltage, current or temperature signal). RAMP AND LADDER OUTPUT FUNCTIONS can be custom configured. BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire current loops..
  • MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution, 0.06% accuracy) and 0-20V (1mV resolution, 0.08% accuracy). MEASURE CURRENT TRANSMITTERS within a range of 0 to 24mA with 0.001mA resolution and 0.08% accuracy. MEASURE THERMOCOUPLE TEMPERATURES within a range of -250°C to +1800°C and resolution of ±0.7°C to ±2°C (range and resolution depends on thermocouple type, supported are type K, J, E, T, N, S, R, and B.).
  • GENERATE PRECISE TEST VOLTAGES, CURRENTS AND SIMIULATED THERMOCOUPLE TEMPERATURE SIGNALS for testing loops, transmitters, data loggers, meters or any devices that measure 4-20mA currents, sensor voltages, or temperatures. Generate voltages in two ranges: 0-100mV (0.01mV resolution) and 0-20V (1mV resolution). Generate currents within a range of 0 to 24mA (0.001mA resolution). Generate thermocouple....
Check Stock

5 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module

  • Input: DC 3 V to 40 V (input voltage must be 1.5 V higher than the output voltage, no boost).
  • Output: DC 1.5 V to 35 V voltage is continuously adjustable, maximum output current is 3 A.
  • Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage (The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down).
  • Features: all use SANYO solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output.
Check Stock

Binval Digital Multimeter 2 in 1 USB C Tester LCD Color Display Voltage Current Watt Meter Automatic Detection and Identification of Charging Protocols Covering Display: DC3.6-32V/0-5.1A

  • 【Multifunctional Tester】：Multiple ports (USB, Type-C and Micro USB) for checking the charging status and process of your USB device or Type c device. New upgraded multimeter tester maximum voltage and current 32V/5.1A/150W, the tester supports a variety of fast charging detection, the process of electrical signal to monitor the charging protocol to meet the various needs of cell phone users. Can also be used to test the capacity and power of mobile power..
  • 【Professional safety protection】: with overvoltage protection, overcurrent protection, undervoltage protection, low energy protection and alarm system. This upgraded USB Type C tester detects safety and maximizes device protection from damage. Automatic output cut-off, audible alarm, sudden power failure to save data..
  • 【Newest Upgraded IPS color screen】: The new upgraded version provides 8 LCD main color screen display interface, key switch display interface. Through the new interface settings, support OTG function, monitor the voltage, current, capacity, power, USB’s power, load impedance, D/D-voltage and other data of USB or type c supported devices. Switch multiple interfaces with the click of a button. (Support 180 degree flip screen, 3 kinds of personalized interface!).
Check Stock

Digital Multimeter Tester, Electrical Voltmeter Tester, Volt Multi Meter, Car Battery Tester Circuit Tester

  • Functions：Accurate measurement of Non-contact voltage test, AC/DC voltage, current, resistance, continuity, frequency, capacitance, and diode, temperature, wire on-off, Battery test. This multimeter can diagnose the automotive, industrial, and household electrical issues..
  • Durable：The outer layer of the digital multimeter is wrapped with a sturdy silicone protective cover. Generally, a drop will not affect the integrity of the multimeter. The automatic range of the digital multimeter is 6000 ranges to ensure the long-term accuracy of the data.
  • Convenient： Designed with a digital LCD display and 'Backlight', showing the reading clearly in dim environment areas. There are two pen holders on the back of the digital multimeter for easy placement.
  • Safety：Passed CE, RoHS certification, with dual fuses and thermistor protection circuits for anti-burn and explosion-proof. Any current range will be protected stably.
  • Practicality: Digital multimeter can record measurement data, which is more convenient. Multimeter with a flashlight lighting..
Check Stock

Digital Multimeter Tester Voltage Meter - Auto-Ranging USB Rechargeable Battery TRMS 6000 Counts Protable Multi Volt Meter with LCD Display & 6 Test Lead Clamp Fast Accurately Measures for Automotive

  • ...g that it can detect and identify the voltage, resistance or current, and automatically select the corresponding range to display it on the LCD screen, no other operations needed.
  • USB Rechargeable: Each of our Voltage Testers with CE, FCC certification, is built in 5000mA large-capacity lithium battery. Unlike other multimeters whose battery needs to be replaced regularly. Ours can be charged by the ordinary micro data cable (included) for reuse. What's more, this multimeter can serve as a power bank to charge your phone, a necessary and compact measuring tool for your cars and home. A great addition to all your electrical and electronic tools.
  • Wide Applications: This handheld Digital Multimeter features 6000 counts auto-ranging for high precision measurement of AC/DC voltage, current, resistance, frequency, capacitance, diode, continuity, temperature and live wire and zero wire identification, etc. It is also equipped with multiple functions such as low battery warning, data hold, LED light, 30s backlight, and auto-off after 15 minutes.
  • Easy to Use: One-handed operation, convenient for you to use this professional ammeter by pressing the buttons. One pair of standard test leads plus another alligator clip test leads make the device adapt to various tes....
Check Stock