Reviews Multi electrode Welding Machine

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

KSEIBI 331215 300 Amp Welding Electrode Holder American Design

  • This Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
  • Large 300-Amp provides durability, up to 5/32" inch electrode capacity..
  • Lightweight and easy to operate with newly designed level for good hand clearance and better hold..
  • The high temperature / high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Use KSEIBI electrode holder to connect to the welding cable and con-duct the welding current to the electrode..
Check Stock

GZ GUOZHI 130A Stick Welder, Super Mini and Portable Welding Machine, Hot Start 110V ARC MMA Welder Machine, Digital Display IGBT Inverter Welder, Welded Normally at Minus 20 Degree

  • ...arantee】: Welder machine with Over-heating protection, Over-current protection and over-loading protection,use more safety ,quality more assured..
  • 【Best Choice for Beginner】: This welder ideal for E6011.E6013.E6014.E7018 and welding rods below 1/8 inch.It can weld 10 electrodes in a row without protection,with high duty cycle..
  • 【Adjustable Voltage & High-Quality Accessories】: 20A-120A adjustable current, 90V-140V wide-voltage design, unafraid of the voltage fluctuations. Accessories included: 10-feet 500A Electrode Holder Assembly, 10-feet 500A Work Clamp Assembly, High quality auto darkening welding glasses, etc. High-quality accessories, durable and not easy to damage..
Check Stock

AZZUNO 135 Amp MIG Welder, 3 in 1 Multiprocess Welder 110V Flux Core Welder Flux MIG/Lift TIG/Stick Welding Machine Synergic Control IGBT Inverter Welder (volts, 110)

  • Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders..
  • Multi-functions in one machine: Suitable for MMA, Lift TIG, flux MIG..
  • Weld up to .030″(0.8mm) and .035″ (0.9mm)with flux core wire.Can Handle E7018 basic electrode..
  • Powerful And Safe Machine:This 135A Welding machine can weld mild up to 3.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe..
  • This Flux Core Welder fits .030″(0.8mm) &. 035″ (1.0mm) flux core wire. ARC mode fits rods: E7018, E6013..
Check Stock

Amico ARC-200, 5-200 Amp Stick Arc Lift-TIG Combo Welder, 100-250V Wide Voltage Welding, 80% Duty Cycle, Compatible with all Electrodes: E6010 E6011 E6013 E7014 E7018 etc.

  • ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. The machine has an excellent Lift-TIG arc welding function.
  • 5-200A comfortably welds thin stainless steel and other various metals..
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs..
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length..
  • ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection..
Check Stock

PrimeWeld MIG180 Mig Welder, 180 Amp Wire Feed Welding Machine With Dual Voltage 220v, 110v

  • ...e MIG180 allows you to create excellent, intricate welding designs..
  • Amazing Performance - The MIG180 gives you three different welding processes. Like most MIG welders, you can run flux-core wire without gas using the same equipment as you do for MIG with gas. This machine also adds aluminum welding and includes an electrode holder for stick welding into your shop's arensal..
  • Aluminum Welding - Welding aluminum can be impossible without the proper equipment. PrimeWeld MIG180 solves the problem with its own special spool gun to alleviate any kinks or jams..
  • Multiple Features - This welder machine has dual 120/240 volts input and can be used as a DC stick welder (MMA), flux core welder (FCAW) and of course a MIG welder (GMAW). The Mig180 comes ready to use right out of the box! Drive Rollers for MIG and Flux are Included. This machine Also takes standard Tweco Consumables..
  • PrimeWeld's Promise - If for any reason you're not satisfied with your MIG180 MIG Welder Machine, simply reach out to Customer Support and we'll make things right for you! All Employees, Parts and Customer service Is located in the USA!.
Check Stock

5pcs 0.1mm x 200mm x 250mm 99.5% Graphite Flexible Foil Gasket Sheet

  • Use for metallurgy, machinery, electronics, chemicals, light industry, aerospace and refractory..
  • High-purity graphite has small resistance coefficient, high temperature, corrosion, oxidation resistance, thermal shock resistance, electrical conductivity, thermal expansion coefficient is small, self-lubricating, easy precision machining etc..
  • Graphite electrodes, carbon rod for spot welding machine, carbon rod machine, butt welding machine..
  • For graphite crucible, smelting furnace, electrical appliances' gold silver point and copper pieces and other metal parts welding effect, ideal tools material..
Check Stock

Denso (4702) IK20TT Iridium TT Spark Plug, (Pack of 1)

  • Larger spark translates to more power and superior fuel economy.
  • 0.4 mm iridium center electrode, world’s smallest diameter that maximizes firing potential.
  • 0.7 mm needle tip ground electrode, promotes higher spark energy and less heat quenching.
  • DENSO patented 360 degree laser welding process, ensuring exceptional quality bond and structural strength with the iridium center electrode..
Check Stock

HONE Stick Welder 110V/220V Actual 140Amp ARC Welder Machine IGBT Inverter Digital Display LCD Welding Machines with Hot Start Arc Force Anti-Stick High Efficiency for 1/16 -1/8 Welding Rod.

  • ...t, the pretty nice beads, specially when in small welding current..
  • ➠【Suitable for Series Welding Rod】The welder has amazing hot-start, is ideal for the rods AWS E6013 E7018 E6011 of 1/16"-1/8"(1.6mm-3.2mm), you just take the rod touching the workpiece, arc striking immediately, also can handle E6010 cellulose electrode, capable of welding mild steel, carbon steel, stainless steel and cast iron..
  • ➠【Safe and Stable】This welding machine has Anti-stick function easy the electrode removal from the workpiece, and closed-loop feedback control and multiple protection functions set internally, to prevent over heat, over current, over-voltage, under-voltage and short circuit damage to make sure safely operation..
  • ➠【Easy to Operate】The soldadora inverter 110V 220V equiped with digital display and trouble indicate, the real welding current be shown, is so easy to use that it can be used by novice or master welder. No matter is man or woman welders..
  • ➠【Portable and Support】HONE welder with a easy carrying handle, compact design, light weight, easy for carrying and storage, very convenient, can be used anywhere you need. If you meet any problem while using, please feel freely to contact us at the first time. Our customer service will help....
Check Stock