Reviews Multi Mode Fiber

LC to LC Fiber Patch Cable Multimode Duplex - 3m (9.84ft) - 50/125um OM3 10G (2 Pack) - Beyondtech PureOptics Cable Series

  • Beyondtech high-quality laser-optimized 50/125 Multimode LC to LC OM3 Fiber Patch Cable is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This Beyondtech Fiber OM3 50/125 LC/LC Fiber Patch Cord conforms with ITU-T G.651.1, TIA/EIA 492AAAC and IEC60793-2-10 A1a.2a standards and complies with all RoHS environmental specifications..
  • This MM fiber has an aqua color jacket with a 3.0mm diameter. OM3 cables have a 1500 MHz-km bandwidth and a 2.3dB/km maximum attenuation at 850 nm light sources. They also have a 500 MHz-km bandwidth and a 0.6dB/km maximum attenuation at a 1300 nm wavelength..
  • This LC to LC Multi mode Duplex OM3 fiber patch cords operate at -20°C to +70°C and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • OM3 LOMMF connects to 10GBase-SR, 10GBase-LRM, SFP+ and QSFP+ transceivers for 10 gigabit network..
Check Stock

4Pack 10GBase-SR SFP+ Transceiver SFP Multi-Mode LC Module 10G 850nm MMF up to 300 Meters Compatible with Cisco SFP-10G-SR,Meraki MA-SFP-10GB-SR,Ubiquiti UF-MM-10G,Mikrotik,Netgear,D-Link and More

  • 4 Pack 10GBase-SR SFP to LC Multi Mode Data Rate:10G.
  • Compatible with MSA compliant equipment from Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UF-MM-10G, Mikrotik, D-Link, Huawei, Netgear,....
  • Widely Used: Work with multi-mode fiber connection Connects a network switch, server, or NIC with SFP to a Gigabit fiber channel network with....
  • Durable & Low Power Consumption: Less power usage and low EMI emission design, heat-conducting increases the life of the product, Hot-pluggable with....
  • EASY TO USE: Easy installation, plug and play, fully hot-swapple, Always keep the protective dust plug on the SFP’s optical bores until you are....
Check Stock

Visual Fault Locator, 30mW 30KM Fiber Optic Cable Tester, Red Light Cable Equipment for 2.5mm Universal Connector, FC to LC Adapter for CATV Telecommunications, Network Cable Test

  • EASY AND ACCURATE IDENTIFICATIONIt can easily and accurately detect and locate fiber breaks, poor connections, bending or cracking. The detector will emit a 650nm bright light for fiber tracing, breaks or faults in the fiber will refract the light..
  • PRACTICAL DESIGN AND EXCELLENT FUNCTIONSmall size and lightweight, it is portable and easy for field test with multiple functions such as constant output power, lower battery warning, long battery life and long distance detection..
  • WIDELY USEDThe 2.5mm universal connector of the detector is compatibly designed for ST, SC, FC interferes both in circle and square shape of different fiber optic cables.Test for both single-mode and multi-mode cables..
  • LONG OUTPUT DISTANCEThis 30mW visual fault locator with battery output strong red light goes 20-30 kilomters far, high effective power circuits allows for stable power..
  • PORTABLEPen-type design with pouch make it portable, easy to check fiber faults with visual fault locator, rugged,Dust-proof design keep fiber connectors clean.
Check Stock

TRENDnet 10 Gigabit PCIe Network Adapter,TEG-10GECTX(Renewed)

  • Supports fiber connections for distances of up to 2km.
  • Energy saving with ACPI 1.0 functionality.
  • 3 Year TRENDnet Manufacturer’s Warranty.
Check Stock

StarTech.com USB 3.0 to Fiber Optic Converter - Compact USB to Open SFP Adapter - USB to Gigabit Network Adapter - USB 3.0 Fiber Adapter Multi Mode(MMF)/Single Mode Fiber(SMF) Compatible (US1GA30SFP)

  • 1GbE USB 3.0 TO FIBER OPTIC CONVERTER: For USB-A enabled computers who require occasional access to a fiber LAN, for laptop users who don't have the option of an internal fiber network card.
  • TECH SPECS: Gigabit 1000Mbps | 1x Open SFP (MSA compliant) | Realtek RTL8153-VB-CG | 1x USB 3.0 Type-A | Multi-mode (MMF) & Single-mode (SMF) Fiber Comp.| 9K Jumbo Frames | VLAN | USB Bus-Powered.
  • MAXIMUM PORTABILITY: Compact, lightweight, and cableless design make this USB NIC / Gigabit Network Adapter easy to securely connect your Laptop to a Gigabit Ethernet Network wherever you go.
  • FLEXIBLE OPEN SFP SLOT: Use any MSA compliant SFP module.
  • beneficial for network admins, installation technicians, and those who require seamless access to different types of fiber connectivity.
Check Stock

CableRack 1 Meter LC to LC Single Mode Fiber 9/125 Fiber Patch Cable (5-Pack)

  • Premium quality LC to LC single mode fiber patch cable for connecting singlemode optical networking devices in datacenter applications. Fiber patch cable single mode is immune to electrical interference and provides Ethernet connectivity up to 10GB. Single mode fiber cable is commonly used between LX and LH SFP optics for both 1GB and 10GB interconnects..
  • Only Corning glass is used in CableRack brand singlemode fiber LC to LC fiber jumpers. You’ll find other sellers mistakenly referring to this cable at OS2, however this cable is actually OS1. OS2 is reserved for loose tube applications over bridges and between buildings. OS1 is for shorter lengths between network devices. The glass fiber insde OS1 and OS2, however is identical..
  • All CableRack fiber optic patch cable LC to LC are fully tested and each package includes the output test results including insertion and DB loss, so you be sure your LC singlemode patch cable meets the highest quality standards. We carry LC single mode patch cables in a varienty of lengths and connector options in our Amazon store. Simply click on our brand name above to view all available products..
  • Single mode LC to LC fiber patch cable solutions are critical to high speed network solutions in the datacenter. These ....
Check Stock

StarTech.com 10G Network Card - 1x 10G Open SFP+ Multimode LC Fiber Connector - Intel 82599 Chip - Gigabit Ethernet Card (PEX10000SRI), Black

  • Get high performance connectivity over multi-mode fiber by upgrading your server or workstation with a 10GBase-SR port.
  • Single-port 10G network card with installed multimode SFP+ transceiver (up to 330 m range).
  • Works with computers with PCI Express such as Dell Inspiron or HP Pavilion & fiber optic network equipment such as switches.
  • Fiber optic NIC / Fiber LAN card / Intel NIC / Intel Fiber Optic PCIe network card / 10G NIC.
  • Intel chip with Intel Virtualization Technology for Connectivity.
Check Stock

Fujikura FSM-70S Fusion Splicer Welding Splicer with CT-30 or CT50 Cleaver and Other Standard Accessories Multi Language

  • Package Accessories: FSM-70S fusion splicer Battery BTR-09 Battery Charge Cord, DCC-18 Fujikura Fiber Cleaver, CT-30 AC Adapter, ADC-18 AC Cord,....
  • Splices all known types of fibers. Fiber core alignment. Typical average splice loss for single mode cable with G.652D fiber is only 0.02 dB. Reduced....
  • Multi language, include 17 kinds language.
  • Reduced splicing time – 7 seconds only..
Check Stock

MokerLink 8 Port 10Gbps SFP+ Switch, Support 1G SFP and 10G SFP+, 160Gbps Bandwidth, Fanless Unmanaged Plug and Play Ethernet Switch

  • 10 Gigabit SFP+: 8 x 10Gbps SFP+ ports, enable high-bandwidth connected, auto-adaptive 1G/2.5G/10G optical fiber module, wider rate range.
  • 160Gbps Bandwidth: switching capacity is 160Gbps, all ports can achieve non-blocking 10G line speed forwarding.
  • Open SFP: Support standard SFP interface optical module, no encryption, such as multi mode, single mode, SFP to RJ45 Modules.***No include SFP module***.
  • Plug and Play: Unmanaged simple setup, with no software to install or configuration needed. LED indicators can clearly show the status and rate of the port.
  • Widely Used: Metal case, fanless design, quiet and stable operation, suitable for high-speed and long-distance fiber transmission.
Check Stock