Reviews Muffler For Daewoo

Karcy Pack of 100 Brass 1/4\ NPT Flat Pneumatic Muffler Filter Silencer Fitting

  • ►【FEATURE】- Sintered Bronze Exhaust Muffler used to reduce dynamic noise of the pneumatic components or device exhaust..
  • ►【UNIVERSAL DESIGN】- Brass Exhaust Muffler Thread Outer Diameter : 1/4NPT.
  • ►【ADVANTAGE】- Sintered bronze filter element designed in many small holes drilled in the pipe wall, When the air flows through the small holes, gradually changing the frequency of the original airflow, thereby reducing noise..
  • ►【 MATERIAL】- Bronze Exhaust Muffler made of copper, high pressure resistant, not easy to rust, not easy to trip, better noise reduction.
  • ►【APPLICATION】- Pneumatic Muffler used to diffuse air and muffler noise from the exhaust ports of air valves, air cylinders and air tools to an acceptable level within noise requirements..
Check Stock

UPOWER 3" Inlet&Outlet Exhaust Resonator,16" Overall Length Center Straight Through Stainless Steel Muffler,Polished

  • ...T RESONATOR: Inlet: 3" inner diameter - Outlet: 3" inner diameter - Overall Length: 16" - Body length: 12" - Body type: 4" round performance resonator - style: Both ends can be inlet, no inlet or outlet difference. Please measure your exhaust pipe’s dimension before purchasing this 3 inch muffler..
  • FIT: 3 inch inlet & outlet exhaust center straight through muffler, universal fit for all 3 inch exhaust pipe. Muffler and exhaust pipe are considered matched as long as they can be welded together seamlessly..
  • PERFORMANCE: The 3 inch inlet resonator muffler is made of high quality stainless steel and used CRF (Continuous Roving Fiberglass) technology, which can absorbs unwanted interior resonance and produces a low, deep tone. Brushed finish for good looking..
  • INSTALLATION: 100% welded design performance resonator for long-lasting durability. Installation instructions are not included, professional installation is highly recommend..
  • WARRANTY: Upower provides 365-days warranty for each resonator muffler. Before purchasing, please make sure the Brand Logo is....
Check Stock

EVIL ENERGY 2.25 Inlet 3 Outlet Exhaust Burnt Muffler Tip Universal for Car Stainless Steel 14.7 Length

  • The muffler is universal, as long as your exhaust pipe is 2.25 inch and have enough space to install, it would fit. (Please measure before purchase!).
  • 2.25 inch inlet, 3 inch outlet, 14.7 inch overall length polished stainless steel performance muffler..
  • Straight through design of muffler reduce back pressure, add a deep tone and aggressive sounds..
  • You can use a variety of installation methods to install the car exhaust muffler. Professional installation is highly recommend..
  • EVIL ENERGY provided muffler 2.25 have 3-month warranty. If you have any other problem, contacting us and we will serve you within 24 hours..
Check Stock

KIMPEX Bolt-on Muffler

  • 【Perfect Performance 】This motorcycle exhaust silencer fits for most motorcycles with 48mm diameter exhaust pipes. This does very well at quieting free flow exhaust, not to affect the performance at all..
  • 【Easy to Install 】The muffler exhaust silencer is equipped with a wrench to match the installation of the outlet 48MM pipe, and the design is perfect without additional adjustments.Motorcycle exhaust silencer can be used to replace the old or damaged muffler, easy to install, just remove the screw and tighten it with our own wrench..
  • 【Excellent Function 】48mm motorcycle muffler DB killer makes the exhaust smoother and improve the power, this detachable DB killer can quell the noise from the motorcycle exhaust, At the same time, it can as an extra decoration of your motorcycle, it can also help your motorcycle get the maximum output, it can work as a spark reducer als detachable DB killer, to get rid of the annoying harsh sound..
  • 【High Quality】This motorcycle exhaust pipe muffler made of high grade stainless steel, excellent quality, corrosion resistance, professional modified exhaust system, high temperature resistance, long life，reduce overall weight for maximum output for maximum performance..
Check Stock

JYAU Exhaust with Muffler for Predator 212cc 6.5hp mini bike, Honda GX160, GX200, DuroMax 7 Hp (JYAUOT00732)

  • Replacement Exhaust with Muffler - been tested on 212cc (6.5hp) Predator Hemi 212cc, Honda GX160, GX200, also tested on Powerhorse 208cc, DuroMax 7 Hp, think it works in all who are Honda clone. This exhaust will change color due to the high heat generated by the engine which is normal, and there is no painting in this exhaust, rust can come out over time, you can apply high heat paint..
  • Compatible Replacement for Predator 212cc, Honda GX160, GX200, Powerhorse 208cc, DuroMax 7 Hp. This is a complete kit that includes all the necessary lock washers and nuts for a complete installation..
  • While this is not a genuine OEM part, it is a direct replacement for the factory exhaust with muffler on your Predator 212cc, Honda GX160, GX200, Powerhorse 208cc, DuroMax 7 Hp. Installation is easy with no special tools required and it will fit, look, and work like the factory exhaust with muffler..
  • NOTE - This muffler has a NPT thread, it is not possible to put it until the end, you will have 1/4 of thread outside and is a little more loud than the factory..
  • 1-Year Warranty - This exhaust with muffler comes complete with a 1-Year Warranty. If the exhaust with muffler ever fails on your Predator 212cc, Honda GX160, GX200, Powerhorse 208cc, DuroMax 7 Hp within the warranty....
Check Stock

UPOWER 2.25" Inlet&Outlet Exhaust Resonator,14" Overall Length Center Straight Through Stainless Steel Muffler,Polished

  • ...ZE: Inlet: 2.25" inner diameter - Outlet: 2.25" inner diameter - Overall Length: 14" - Body length: 10" - Body type: 4" round performance resonator - style: Both ends can be inlet, no inlet or outlet difference. Please measure your exhaust pipe’s dimension before purchasing this 2.25 inch muffler..
  • FIT: 2.25 inch inlet & outlet exhaust center straight through muffler, universal fit for all 2.25 inch exhaust pipe. Muffler and exhaust pipe are considered matched as long as they can be welded together seamlessly..
  • PERFORMANCE: The 2.25 inch inlet resonator muffler is made of high quality stainless steel and used CRF (Continuous Roving Fiberglass) technology, which can absorbs unwanted interior resonance and produces a low, deep tone. Brushed finish for good looking..
  • INSTALLATION: 100% welded design performance resonator for long-lasting durability. Installation instructions are not included, professional installation is highly recommend..
  • WARRANTY: Upower provides 90-days warranty for each resonator muffler. Before purchasing, please make sure the Brand....
Check Stock

S SIZVER Weld-On Muffler Series 3 Dual Titanium Burnt Tip 2.5 Inlet+Silencer

  • ✔*** Please check this size of the muffler ( 2nd Spec pictures ) and compare the size to the installation location for fitment ***.
  • ✔CAUTION: Due to installation to weld-on the muffler, an extended piping might be required and charged my your mechanic..
  • ✔THIS PRODUCT RECOMMENDS PROFESSIONAL INSTALLATION. Any damage during installation will not be refunded.
  • ✔The muffler provides a deep and smooth tone and Made From High Quality T-304 stainless steel.
  • ✔Package includes: 1 x Exhaust Muffler.
Check Stock

NEW FLOWMASTER 40 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,2.50" DUAL OUT,BLACK FINISH

  • Brand New Flowmaster 40 Series Chambered Muffler, 3.00" Center In, 2.50" Dual Out, Black Finish (Holley Part #430402).
  • The Original 40 series muffler delivers an aggressive exterior and interior tone. If you are looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability..
  • Features: Durable fully welded 16 gauge aluminized steel | Aggressive Sound Exterior Exhaust Tone | Noticeable Interior Resonance | Excellent Street/Strip & Off Road application.
  • NOTE: Universal Muffler - Some adaptation may be required..
Check Stock

NEW FLOWMASTER 40 SERIES CHAMBERED MUFFLER,OVAL,BLACK,DUAL 2.5" INLET & OUTLET,19" OVERALL LENGTH

  • Brand New Flowmaster 40 Series Chambered Muffler, Oval, Black Finish, Dual 2.5" Inlet & Outlet (Holley Part #425404).
  • The Original 40 series muffler delivers an aggressive exterior and interior tone. If you are looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability..
  • Features: No internal packing to blowout | Excellent Street/Strip and Off Road application | Aggressive Sound Exterior Exhaust Tone | Durable fully welded 16 gauge aluminized steel.
  • NOTE: Universal Muffler - Some adaptation may be required..
Check Stock