Reviews Msquare Nut 2mm

uxcell Square Nuts, M4x7mmx2mm Yellow Zinc Plated Metric Coarse Thread Assortment Kit, 100 Pcs

[DIMENSION] - 0.28"(7mm) wide, 0.04"(2mm) high..
[MATERIAL] - Made of carbon steel, yellow zinc plated finished,anti-rust and anti-corrosion,superior electrical conductivity..
[How to use] - Usually use screws to clamp the connected terminal wire.
use a wrench to fix the square nut, and use a drive tool to lock the screw in the tightening position..
[Application]- It suitable for indoor and outdoor, widely used in civil furniture, equipment, construction, electrical appliances, industrial machinery, etc., generally used with fasteners, screws, washers, screws, etc., mainly for connection, assembly, fixing and other functions..

FEATURES: Total length:15mm/0.59 inch, Bottom Thread: M2 (Fit for tie rod with M2 thread) Ball head hole diameter: 2mm (fit M2 screw and nut ).
SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
PACKAGE CONTENT: 4 Pcs x Rod End Tie Rod End Ball Head Joint.

⭐Package Content: 200Pcs M3-2 Pressure Riveting Nut..
⭐Made of durable carbon steel with electroplated surface. Resistant to rust..
⭐It is fixed by stamping and forming without causing deformation of the metal sheet..
⭐Widely used in automobiles, motorcycles, bumpers, electronic products, etc..

High-quality and Durable Material–The joinery punch locator is aluminum alloy 6061+steel HRC50(drill bushing)+brass (nut). High hardness, quality assurance, durable and long service life..
Easy to Use-Adjustable to clamp on different thickness of wood boards from 17mm to 60mm, quick operation, simple and convenient..
High Precision–The joinery punch locator provides improved version comes with 6mm, 8mm and 10mm bushings and 1mm and 2mm scoring hole for making different sizes of holes..
Adjustable Stop–The joinery punch is specially prepared adjustable stop and drill accurately, which can drill equally space hole along the wood..
Convenient and Practical–With the practical joinery punch locator, you can more conveniently work for woodworking. It is a great set tool for both furniture factory and woodworking enthusiasts..

Size: M2 Micro Cross Flat Head Screws, it is tiny screw and hard to find in Ordinary hardware store.
Black（Diameter*Length）:2mm*6mm, 2mm*8mm, 2mm*10mm, 2mm*12mm, each size 200Pcs.
Bronze（Diameter*Length）:2mm*6mm, 2mm*8mm, 2mm*10mm, 2mm*12mm, each size 200Pcs.
Suitable for the projects requiring tiny screw. Micro Cabinet Door Hinges Chair, home improvement and office outdoor woodwork.
Micro wood screws have corrosion resistance and not easy to rust, applicable to most types of hardware accessories fixed installation.

...16-inch (4.5mm), 7/32-inch (5.5mm), 1/4-inch (6mm), 9/32-inch (7mm).
1.75-inch (4.4cm) throat depth to punch holes as close as 1.75 inches away from material edge.
EASY TO USE: This sheet metal punch uses interchangeable heads to pierce holes in a material of your choosing.
Select a proper size punch and die, remove nut near handle using die adjustment tool, move connection bar, place punch on the head of hand punch, rotate nut by again using the adjustment tool to adjust caliper, and set distance between the edge and the hole.
Apply lubricant (not included) after use to reduce friction, ensure a clean cut, and prolong tool life.
SIMPLE STORAGE: Heavy-duty 8.75” x 4.6” x 2” inch (22.2cm x 11.7cm x 5.1cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
PACKAGE CONTENTS: Package includes (1) metal punch tool, (7) punches, (7) dies, (1) attached throat depth gauge, (1) die adjustment tool, and (1) storage case for your convenience.

【2MM Jump Rings for Jewelry Making】Jump rings 2MM for jewelry making, 2MM gold jump rings.
【Exclusive Size】2MM in diameter tiny open jump rings gold, 0.3MM thick mini jump rings 2MM gold jump rings for jewelry making..
【Package】The package contains 100PCS 2MM open jump rings for jewelry making, gold plated jump rings 2MM..
【Widely Used】2MM little jump rings for diy miniature jewelry, necklaces chain, bracelets, earring, anklets etc..
【We Promise】Provide you with a 30-day return guarantee or exchange. If you don’t like these 2MM 18K open jump rings, please contact us, we will give you a satisfactory answer within 24 hours..

【2MM Jump Rings Gold】Jump rings 2MM for jewelry making, 2MM gold jump rings, 100PCS open jump rings for jewelry making..
【Super Tiny Size】 0.3MM thick mini jump rings 2MM gold jump rings for jewelry making, 2MM in diameter tiny open jump rings gold..
【Package】The package contains 100PCS 2MM open jump rings for jewelry making, gold plated jump rings 2MM..
【Widely Used】2MM little jump rings for diy miniature jewelry, necklaces chain, bracelets, earring, anklets etc..
【We Promise】Provide you with a 30-day return guarantee or exchange. If you don’t like these 100PCS 2MM 18K open jump rings, please contact us, we will give you a satisfactory answer within 24 hours..

Hex Nut Size: 10 x 5mm / 0.39" x 0.2"(Hex Width*H).
Frame Plate Size: 50 x 18 x 2mm/ 1.97" x 0.71" x 0.08"(L*W*T).
Round Washers Size: 18 x 6 x 1mm / 0.71" x 0.24" x 0.04"(OD*ID*T).
Package Content: 4 x U-Bolt, 8 x Nuts, 8 x Round Washers, 4 x Plates.
Material: Steel construct u bolt, galvanized surface treatment, bending forming processing technology with great performance in antirust and corrosion resistance, high hardness and good tensile strength..
Application: U-bolt is used to fasten or attach locking components to pipes, wood, etc. Just insert and tighten the nuts at both ends. It is suitable for the connection of boats, pipelines, trailers, and industrial steel structure conduits..