Reviews Msata Ssd Install

32GB KingSpec 2.5-inch PATA/IDE SSD Solid State Disk (MLC Flash) SM2236 Controller

This adapter using JM20330 Serial ATA Bridge Chip..
50mm (1.8 inches) MSATA Mini PCI-E SATA SSD to 2.5 inches Notebook IDE Adapter with case. .
Used with MSATA(Mini PCI-E SATA) SSD ONLY!.

√[Important] It is strongly recommend to use 5.8G wifi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also pls format the new SSD before use..
√X857 V2.0 mSATA adapter only design for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), Supports up to 1TB mSATA interface SSD hard disk..
√Update in 2022: X735 V2.5 has been update to X735 V3.0 version with width voltage DC 6V-30V input on march 28th 2022 and remove latching switch port. You must install shell script to enable the PWM fan to work since it need PWM signal to run, refer to X735 Software on WiKi..
Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot).
√ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..

This mSATA to USB 3.0 adapter is suitable for those mSATA SSDs that have been eliminated after upgrade. It can be used as a USB flash drive to expand your external storage space for your Laptops or desktop computers..
Note: This adapter card only supports mSATA SSD (3cm*5cm), and does not support SATA Mini PCIE/PATA mini PCIE/RAID MINI PCIE SSD. Only fit for SSDs with current less than 1.5A. If it is a new hard disk, please format it before use, otherwise it may not be recognized by the computer..
Adopt ASM1153E chip, Great compatibility, it supports 512GB SSD and all major platforms with great stable signal and powerful power supply..
USB3.0 read and write speeds up to 200Mb/s +.
Read and write speed with UASP can up to 400Mb/s +. Note: To achieve UASP acceleration, please make sure that your computer supports UASP. Currently, UASP-enabled systems include Win 8 and Mac OS 8&9 (the actual speed depends on your SSD speed.).
Directly plugged into the USB port of the PC, no USB cable is needed, the loss is reduced, the signal becomes more stable, and the power supply is more powerful..

➤ M.2 NVME SSD to PCIe 3.0 x4 channel for Key-M M.2 SSD (form factors 2230, 2242, 2260,2280).
➤ M.2 SATA-based SSD to SATA channel for Key-B/B+M M.2 SSD (form factors 2230, 2242, 2260,2280).
➤ mSATA to SATA channel for 30x50mm mSATA SSD.
➤ With advanced heat sink solution,PCB 24 X 5 copper hole effective ventilation heat dissipation,Including 2 Aluminum Heatsink.
➤ Including both regular size and low-profile slot brackets for flexible system chassis installation. LED power and data transfer status. No driver installation required.

This adapter using JM20330 Serial ATA Bridge Chip..
50mm (1.8 inches) MSATA Mini PCI-E SATA SSD to 2.5 inches Notebook IDE Adapter with case. .
Used with MSATA(Mini PCI-E SATA) SSD ONLY!.

Multifunctional: USB3.0 interface, SATA interface, large 4PIN IDE power socket or DC12V power supply socket, card reader, etc. are extended through the optical drive position or floppy drive position of the computer case..
With NGFF M.2 MSATA: Multi-Function USB 3.0 Hub CF TF M2 SD MS Card Reader Fan Controller equipped with SATA NGFF M.2/Msata SSD, supports M.2 SSD with SATA M.2 B key NGFF specification and mini SATA SSD..
OTB One Click Backup: OTB one click backup, can easily and quickly transfer files from PC to hard drive..
Internal and External SATA: The external SATA provides power and data transmission, and the SSD/HDD hard disk switch controls the internal SATA hard disk to turn on and off..
Support System: Internal Memory Card Readers Support for WinXP, for Vista, for Win7, for Win8, for Win10, for Linux, for OS X, etc..

M.2 (NGFF) & mSATA to SATA III 2.5" Enclosure..
Green LED indicates power status and Red LED indicates active status.
Data transfer rate: 6Gb/s up to 520MB/Sec.
Short circuit protection NOTE: 1) Make sure your drive is compatible with this device. This device only supports M.2 NGFF or mSATA SSD's. 2) .While handling your SSD, special precautions should be taken to prevent damage caused by static electricity. Failure to do so may lead to component failure. 3) Make sure your SSD is firmly conected. 4) Ensure connecting components were not damaged while installing your SSD,.

Support key M, M.2 (NGFF) form factor 2230/2242/2260/2280 , NVMe or AHCI protocol, PCIe-based SSD only, NOT support any M.2 SATA-based SSD, nor any mSATA SSD.
Converts one M.2 (M Key) interface to one PCIe 3.0 x4 x8 x16 compatible interface. This is a passive adapter, no drivers needed.
Booting possible from NVMe or AHCI SSD with PCIe booting enable motherboards. For example Intel 9 and above series chips motherboards. To book properly from installed NVMe or AHCI SSD, please install OS with native NVMe/AHCI support. Win 10 is recommended.
Groove aluminum heat sink for excellent heat dissipation.

Converts any mSATA SSD to a full-size 2.5-inch SATA SSD with SATA III 6Gbps interface.
Supports a mSATA SSDs of either full size or half size.
Read speeds up to 520MB/s and write speed up to 480MB/s.
Short circuit protection, Thermal shutdown protection.
Mounting screws and aluminum casing included.